journal article·2017-01

A CZTSe solar cell with 8.2% power conversion efficiency fabricated using electrodeposited Cu/Sn/Zn precursor and a three-step selenization process at low Se pressure

Liyong Yao, Jianping Ao, Ming-Jer Jeng, Jinlian Bi, Shoushuai Gao, Guozhong Sun, Qing He, Zhiqiang Zhou, Yun Sun, Liann-Be Chang

Publisher page

Abstract

Abstract In preparing Cu 2 ZnSnSe 4 (CZTSe) thin films, selenization at high Se pressure is likely to form a thick molybdenum diselenide (MoSe 2 ) layer. An excessively thick MoSe 2 layer degrades the performance of CZTSe solar cells. Annealing under low Se pressure has been suggested to prevent the formation of such a thick MoSe 2 layer. However, the potential loss of Sn metal from CZTSe thin films at low Se pressure or high temperature raises the additional difficulty of controlling the compositions and phases of the films. Carefully controlling these selenization parameters to yield high-quality CZTSe thin films is important. This study investigates the loss of Sn and the formation of molybdenum diselenide in CZTSe thin films at low Se pressure. Three-step selenization at low Se pressure is performed on an electrodeposited Cu/Sn/Zn precursor to prepare high-quality CZTSe thin films. In the first step, rapid thermal annealing with a substrate temperature of 500 °C and a low Se vapor pressure of 4.6 Pa was performed to reduce the loss of Sn and the thickness of the MoSe 2 layer, and thus to obtain a Cu-poor and Zn-rich film. In the second step, a high annealing temperature of 570 °C and an inert gas at high pressure was used to improve elemental diffusion and increase the uniformity of the elemental distribution. In the third step, thermal annealing with a substrate temperature of 500 °C and a low Se vapor pressure of 4.6 Pa was performed to reduce the loss of Sn and the thickness of the MoSe 2 layer, and to eliminate the impurity phase of SnSe (which was formed in the second step of annealing) on the surface of the CZTS films. The loss of Sn and the formation of molybdenum diselenide in the CZTSe thin films are negligible when this three-step selenization at low Se pressure is used. When the selenization parameters are properly controlled, CZTSe solar cells with an efficiency of as high as 8.2% can be obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Electrodeposited Cu2ZnSnSe4thin film solar cell with 7%10.1002/pip.2332 ↗
2. 11.2% Efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
3. Hydrazine-processed ge-substituted CZTSe solar cells10.1021/cm302881g ↗
4. Pure sulfide Cu2ZnSnS4 Thin film solar cells fabricated by preheating an electrodeposited metallic stack
5. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
6. Highly efficient copper–zinc–tin–selenide (CZTSe) solar cells by electrodeposition10.1002/cssc.201301347 ↗
7. 9.0% efficient Cu2ZnSn(S,Se)4solar cells from selenized nanoparticle inks10.1002/pip.2472 ↗
8. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
9. 8.2% pure selenide kesterite thin-film solar cells from large-area electrodeposited precursors10.1002/pip.2643 ↗
10. Chemical insights into the instability of Cu2ZnSnS4Films during annealing10.1021/cm202379s ↗
11. A. Redinger, D.M. Berg, P.J. Dale, N. Valle, S. Siebentritt, 2011, Route towards high efficiency single phase Cu2ZnSn(S,Se)4 thin film solar cells: Model experiments and literature review, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC) pp. 000025–000028.10.1109/PVSC.2011.6185836 ↗
12. On the Sn loss from thin films of the material system Cu-Zn-Sn-S in high vacuum10.1063/1.3273495 ↗
13. Efficiency electrodeposited Cu2ZnSnS4 solar cell10.1002/aenm.201100526 ↗
14. Optical designs that improve the efficiency of Cu2ZnSn(S,Se)4 solar cells10.1039/C3EE42541J ↗
15. 19·9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81·2% fill factor10.1002/pip.822 ↗
16. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%, phys
17. Thermodynamic aspects of the synthesis of thin-film materials for solar cells10.1002/cphc.201200067 ↗
18. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
19. On the kinetics of MoSe2 interfacial layer formation in chalcogen-based thin film solar cells with a molybdenum back contact10.1063/1.4794422 ↗
20. L. Kaupmees, M. Altosaar, O. Volobujeva, P. Barvinschi, 2009, Study of Mo selenisation process on different Mo substrates, in: Proceedings of the 2009 Thin-Film Compound Semiconductor Photovoltaics—MRS spring meeting, Cambridge Univ Press.10.1557/PROC-1165-M08-01 ↗
21. Rapid thermal processing annealing challenges for large scale Cu2ZnSnS4 thin films10.1002/pssa.201431387 ↗
22. CZTSe solar cells prepared by electrodeposition of Cu/Sn/Zn stack layer followed by selenization at low Se pressure10.1186/1556-276X-9-678 ↗
23. C.L. Yaws, 1995, Handbook of Vapor Pressure: Volume 4:: Inorganic Compounds and Elements, Gulf Professional Publishing.
24. Secondary phase formation in Zn-rich Cu2ZnSnSe4-based solar cells annealed in low pressure and temperature conditions10.1002/pip.2473 ↗
25. Growth pressure dependence of Cu2ZnSnSe4 properties10.1016/j.solmat.2010.07.008 ↗
26. Influence of selenization pressure on the growth of Cu2ZnSnSe4 films from stacked metallic layers10.1002/pssc.200982748 ↗
27. Morphological and structural characterization of Cu2ZnSnSe4 thin films grown by selenization of elemental precursor layers10.1016/j.tsf.2008.11.034 ↗
28. The Se-Sn (Selenium-Tin) system10.1007/BF02874984 ↗
29. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
30. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
31. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
32. The Cu−Se (Copper-Selenium) system10.1007/BF02868284 ↗