journal article·2019-04

Bio-based poly (lactic acid)/high-density polyethylene blends as shape-stabilized phase change material for thermal energy storage applications

Xiang Lu, Jintao Huang, Benhao Kang, Teng Yuan, Jin-ping Qu

Publisher page

Abstract

Abstract In this study, novel shape-stabilized phase change materials (SSPCMs) were first prepared via melt blending by employing bio-based poly (lactic acid) (PLA) as the supporting matrix and high-density polyethylene (HDPE) as the phase change working substance for thermal energy storage (TES) applications. Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) results indicated that no chemical reaction occurred between PLA and HDPE during melt processing, but the crystalline regions of HDPE was decreased by the introduction of PLA component. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and shape stability tests showed that the PLA50/50HDPE blend with co-continuous phase morphology had good shape stability and thermal energy storage capacity. The co-continuous structure of un-melted PLA component in the PLA50/50HDPE blend could provide strong support for the HDPE component and maintain its shape during the phase change process. The latent heat for the PLA50/50HDPE blend during melting and freezing process are 100.1 J/g and 97.6 J/g, respectively, and the relative enthalpy efficiency reaches as high as 104.2%. After 10 thermal cycles, the thermal parameters of PLA50/50HDPE blend remain nearly constant. It indicated that the PLA50/50HDPE blend as SSPCM had excellent reusability and thermal reliability. The simple thermal energy storage and conversion experiments showed that the PLA50/50HDPE SSPCM owns great potential in solar energy storage or industrial waste heat recovery field.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Polymer composites and self-healing · Korean Urban and Social Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Dual-level packaged phase change materials – thermal conductivity and mechanical properties10.1016/j.solmat.2017.05.030 ↗
2. Microencapsulation of phase change materials with binary cores and calcium carbonate shell for thermal energy storage10.1016/j.apenergy.2016.03.037 ↗
3. Preparation and properties studies of halogen-free flame retardant form-stable phase change materials based on paraffin/high density polyethylene composites10.1016/j.apenergy.2007.10.017 ↗
4. Facile synthesis and performances of PEG/SiO2 composite form-stable phase change materials10.1016/j.solener.2013.08.021 ↗
5. Preparation and characterization of in situ grafted/crosslinked polyethylene glycol/polyvinyl alcohol composite thermal regulating fiber10.1016/j.solmat.2015.04.014 ↗
6. Preparation of phase change material emulsions with good stability and little supercooling by using a mixed polymeric emulsifier for thermal energy storage10.1016/j.solmat.2017.10.025 ↗
7. Solvent-free synthesis and properties of novel solid–solid phase change materials with biodegradable castor oil for thermal energy storage10.1016/j.solmat.2015.12.009 ↗
8. Synthesis, characterization and thermal properties of paraffin microcapsules modified with nano-Al 2 O 310.1016/j.apenergy.2014.09.028 ↗
9. Shape stabilised phase change materials based on a high melt viscosity HDPE and paraffin waxes10.1016/j.apenergy.2015.10.030 ↗
10. Preparation and characterization of a novel polymeric based solid–solid phase change heat storage material10.1016/j.enconman.2009.02.013 ↗
11. Preparation and characterization of form-stable paraffin/polyurethane composites as phase change materials for thermal energy storage10.1016/j.enconman.2013.09.015 ↗
12. Interpenetrating phase change polymer networks based on crosslinked polyethylene glycol and poly(hydroxyethyl methacrylate)10.1016/j.solmat.2015.12.040 ↗
13. Effect of expanded graphite on properties of high-density polyethylene/paraffin composite with intumescent flame retardant as a shape-stabilized phase change material10.1016/j.solmat.2009.10.014 ↗
14. An energy-efficient composite by using expanded graphite stabilized paraffin as phase change material10.1016/j.compositesa.2017.12.032 ↗
15. Thermal‐energy storage in crosslinked pellets of high‐density polythylene for home heating and cooling via off‐peak electric power utilization10.1002/app.1983.070280919 ↗
16. Latent thermal storage unit using form-stable high density polyethylene; Part II: numerical analysis of heat transfer10.1115/1.3268108 ↗
17. Latent thermal storage unit using form-stable high density polyethylene; Part I: performance of the storage unit10.1115/1.3268107 ↗
18. Durability of a fin-tube latent heat storage using high density polyethylene as PCM10.1088/1757-899X/251/1/012123 ↗
19. High density polyethylene spheres with PCM for domestic hot water applications: water tank and laboratory scale study10.1016/j.est.2017.07.025 ↗
20. Thermal properties of 60 Co irradiated crosslinked high density polyethylene10.1016/j.solmat.2015.12.042 ↗
21. Charge and discharge characteristics of a direct contact latent thermal energy storage unit using form-stable high-density polyethylene10.1115/1.3267626 ↗
22. Supertoughened poly(lactic acid)/polyurethane blend material by in situ reactive interfacial compatibilization via dynamic uulcanization10.1021/ie503092w ↗
23. Mechanical and thermal properties of epoxidized soybean oil plasticized polybutylene succinate blends10.1002/pat.1937 ↗
24. Introduction of a long-chain branching structure by ultraviolet-induced reactive extrusion to improve cell morphology and processing properties of polylactide foam10.1039/C6RA26457C ↗
25. Morphology and properties of bio-based poly (lactic acid)/high-density polyethylene blends and their glass fiber reinforced composites10.1016/j.polymertesting.2016.06.025 ↗
26. Metal foam embedded in SEBS/paraffin/HDPE form-stable PCMs for thermal energy storage10.1016/j.solmat.2015.12.041 ↗
27. Fully biodegradable and biorenewable ternary blends from polylactide, poly(3-hydroxybutyrate-co-hydroxyvalerate) and poly(butylene succinate) with balanced properties10.1021/am3004522 ↗
28. Effect of molecular structure parameters on crystallinity and environmental stress cracking resistance of high-density polyethylene/TiO210.1002/adv.21719 ↗
29. Crystallization and mechanical properties of T-ZnOw/HDPE composites10.1016/j.msea.2008.09.061 ↗
30. Hierarchical structure of injection-molded bars of HDPE/MWCNTs composites with novel nanohybrid shish–kebab10.1016/j.polymer.2009.11.059 ↗
31. Understanding of the tensile deformation in HDPE/LDPE blends based on their crystal structure and phase morphology10.1016/S0032-3861(02)00940-0 ↗