Highly transparent and conducting ITO/Ag/ITO multilayer thin films on FEP substrates for flexible electronics applications
Source abstract
Abstract
Abstract Transparent and conducting ITO/Ag/ITO (IAI) multilayer coatings were deposited on glass and flexible fluorinated ethylene propylene (FEP) substrates by reactive sputtering using metallic In:Sn (90%:10%) and Ag targets at room temperature. Middle Ag layer thickness was optimized to obtain maximum figure of merit ( ϕ ) and the optimum Ag layer thickness was found to be ~13 nm. The optimized IAI multilayer on glass substrate showed transmittance of ~88.6% and sheet resistance of ~7.1 Ω/sq. The transmittance increased to ~91.4% for the IAI multilayer deposited on one side etched glass. The optimized IAI multilayer coating was also deposited on flexible FEP substrates. The electrical, optical, structural and morphological properties of IAI deposited on glass and FEP substrates were compared. IAI deposited on FEP substrate showed transmittance of ~90.2% at λ = 550 nm, sheet resistance of ~6.9 Ω/sq. and figure of merit of ~52 × 10−3 Ω−1. Bending test of IAI deposited FEP proved the high flexibility of IAI multilayer for the flexible transparent electrode applications. Solar selectivity study of IAI on FEP substrate showed it can effectively reflect the higher wavelength region of solar spectrum and can be used as a flexible solar spectrum segregator. Optical haze measurements of IAI coated glass and FEP show that high haze value can be achieved by increasing the roughness on non-coated side of the FEP substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Advanced Sensor and Energy Harvesting Materials · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Past achievements and future challenges in the development of optically transparent electrodes10.1038/nphoton.2012.282 ↗
2. Room temperature flexible and transparent ITO/Ag/ITO electrode grown on flexile PES substrate by continuous roll-to-roll sputtering for flexible organic photovoltaics10.1088/0022-3727/42/23/235109 ↗
3. Roll-to-Roll sputtered ITO/Cu/ITO multilayer electrode for flexible, transparent thin film heaters and electrochromic applications
4. Roll-to-roll sputtered ITO/Ag/ITO multilayers for highly transparent and flexible electrochromic applications10.1016/j.solmat.2016.10.033 ↗
5. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
6. ITO/metal/ITO multilayer structures based on Ag and Cu metal films for high-performance transparent electrodes10.1016/j.solmat.2008.02.038 ↗
7. Comparison of ITO/metal/ITO and ZnO/metal/ZnO characteristics as transparent electrodes for third generation solar cells10.1016/j.solmat.2012.01.007 ↗
8. ITO/Au/ITO multilayer thin films for transparent conducting electrode applications10.1016/j.apsusc.2007.07.080 ↗
9. Optical properties of WO3/Ag/WO3 multilayer as transparent cathode in top-emitting organic light emitting diodes10.1021/jp109943b ↗
10. Transparent conductive ITO/Ag/ITO electrode deposited at room temperature for organic solar cells10.1007/s11664-016-4956-9 ↗
11. Highly flexible transparent electrodes for organic light-emitting diode-based displays10.1063/1.1806559 ↗
12. Thermal stability of heat-reflective films consisting of oxide–Ag–oxide deposited by dc magnetron sputtering10.1116/1.573658 ↗
13. Design and development of ITO/Ag/ITO spectral beam splitter coating for photovoltaic-thermoelectric hybrid systems10.1016/j.solener.2016.11.027 ↗
14. Optical properties of materials for concentrator photovoltaic systems10.1016/j.solmat.2011.02.025 ↗
15. Optical durability testing of candidate solar mirrors
16. Optical and electrical properties of ITO thin films sputtered on flexible FEP substrate as passive thermal control system for space applications10.1016/j.solmat.2015.10.035 ↗
17. Fluorinated ethylenepropylene copolymer as a potential capillary material in CE10.1002/elps.200700171 ↗
18. Extraordinary high broadband specular transmittance of sodalime glass substrate by vapor phase etching10.1016/j.solener.2016.01.044 ↗
19. Optical properties of metal-dielectric multilayers in the near UV region10.1016/j.vacuum.2005.07.011 ↗
20. Dependence of film composition and thicknesses on optical and electrical properties of ITO–metal–ITO multilayers10.1016/S0040-6090(98)00520-3 ↗
21. Effect of Ag thickness on electrical transport and optical properties of indium tin oxide–Ag–indium tin oxide multilayers10.1063/1.3153977 ↗
22. Low resistance and highly transparent ITO–Ag–ITO multilayer electrode using surface plasmon resonance of Ag layer for bulk-heterojunction organic solar cells10.1016/j.solmat.2009.06.014 ↗
23. New figure of merit for transparent conductors10.1063/1.323240 ↗
24. Transparent conductive ITO/Ag/ITO multilayer films prepared by low temperature process and physical properties10.1080/15421400903584465 ↗
25. Color tunable low cost transparent heat reflector using copper and titanium oxide for energy saving application10.1038/srep20182 ↗
26. Optimization of transparent heat mirrors based on a thin silver film between antireflection films10.1016/0040-6090(82)90601-0 ↗
27. Thermal-photovoltaic solar hybrid system for efficient solar energy conversion10.1016/j.solener.2005.04.022 ↗
28. Spectral beam splitting for efficient conversion of solar energy-A review10.1016/j.rser.2013.08.026 ↗
29. Transparent heat mirrors: influence of the materials on the optical characteristics10.1364/AO.20.000251 ↗
30. Heat mirror coatings for energy conserving windows10.1016/0165-1633(81)90047-2 ↗
31. Numerical analysis and optimization of a spectrum splitting concentration photovoltaic–thermoelectric hybrid system10.1016/j.solener.2012.02.024 ↗
32. Optical haze of transparent and conductive silver nanowire films10.1007/s12274-013-0323-9 ↗
33. Novel nanostructured paper with ultrahigh transparency and ultrahigh haze for solar cells10.1021/nl404101p ↗
34. Haze measurement and scattering analysis of novel indium-tin-oxide (ITO) nanowhiskers for enhance absorption in thin-film solar cells
35. ITO/ATO bilayer transparent electrodes with enhanced light scattering, thermal stability and electrical conductance10.1016/j.apsusc.2016.05.012 ↗
36. Silver nanowire based flexible electrodes with improved properties: high conductivity, transparency, adhesion and low haze10.1016/j.materresbull.2013.04.035 ↗
37. Padera · 2009 · 1
38. Comparative investigation of transparent ITO/Ag/ITO and ITO/Cu/ITO electrodes grown by dual-target dc sputtering for organic photovoltaics10.1149/1.3131362 ↗
39. TCO/Ag/TCO transparent electrodes for solar cells application10.1007/s00339-014-8222-9 ↗
40. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
41. Broadening of the transmission range of dielectric/metal multilayer structures by using different metals10.1016/j.vacuum.2014.09.013 ↗
42. Effect of the Ag deposition rate on the properties of conductive transparent MoO3/Ag/MoO3 multilayers10.1016/j.solmat.2013.05.026 ↗
43. Investigation of conductive and transparent Al-doped ZnO/Ag/Al-doped ZnO multilayer coatings by electron beam evaporation10.1016/j.tsf.2007.08.089 ↗
44. Low resistivity transparent electrodes for displays on polymer substrates10.1016/S0040-6090(01)01053-7 ↗
45. Optimization of TiO2/Cu/TiO2 multilayer as transparent composite electrode (TCE) deposited on flexible substrate at room temperature10.1149/2.0061411ssl ↗
46. Dependence of intermediated noble metals on the optical and electrical properties of ITO/metal/ITO multilayers10.1016/j.optcom.2008.12.044 ↗