Influence of cycling temperature on the electrochromic properties of WO3//NiO devices built with various thicknesses
Source abstract
Abstract
Abstract Electrochromic smart windows, which are able to vary their optical transmittance by the application of a voltage, improve the indoor comfort in buildings by controlling light and temperature. Among electrochromic devices, ECDs, WO 3 and NiO are often associated leading to neutral color. This work focuses on the influence of the thickness of WO 3 and NiO single layers on the ECD electrochemical and optical properties. Initial characterizations in lithium-based liquid electrolyte, show a non-linear evolution of the electrochemical capacity for each oxides vs. thickness while for similar thickness, WO 3 thin films exhibit larger EC properties than NiO ones. The combinations of various WO 3 and NiO thicknesses lead to ECDs of which capacity appears limited by the one of NiO, while the switch to a neutral color always remain. Besides, the influence of each oxide on the ECD cyclic voltammogram shape is discussed. Finally, the study of the cycling temperature, in the range −40 °C to 80 °C on the electrochromic properties of ITO/650 nm-WO 3 /LiClO 4 -PC +PMMA/360 nm-NiO/ITO shows an increase in performance with temperature nevertheless associated with signs of degradation above 60 °C. At low temperature, the decrease in capacity is interestingly associated with a remaining significant optical contrast and the capacity recovery if the ECD is further cycled at RT.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · Advanced Memory and Neural Computing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Integrated smart electrochromic windows for energy saving and storage applications10.1039/C3CC47950A ↗
2. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
3. Opportunities and challenges of electrochromic phenomena in transition metal oxides10.1016/0927-0248(92)90077-3 ↗
4. Optical and electrochromic properties of oxygen sputtered tungsten oxide (WO3) thin films10.1016/j.solmat.2006.09.005 ↗
5. Synthesis and characterization of WO3 thin films by surfactant assisted spray pyrolysis for electrochromic applications10.1016/j.matchemphys.2013.02.047 ↗
6. Electrochromic properties of vertically aligned Ni-doped WO3 nanostructure films and their application in complementary electrochromic devices10.1039/C5TC03750F ↗
7. Electrochromics for smart windows: oxide-based thin films and devices10.1016/j.tsf.2014.02.002 ↗
8. Oxide electrochromics: an introduction to devices and materials10.1016/j.solmat.2011.08.021 ↗
9. Template synthesis of NiO ultrathin nanosheets using polystyrene nanospheres and their electrochromic properties
10. Surfactant-assisted ultrasonic spray pyrolysis of nickel oxide and lithium-doped nickel oxide thin films toward electrochromic applications10.1016/j.apsusc.2014.09.128 ↗
11. Electrochromic properties of NiOx:H films deposited by DC magnetron sputtering for ITO/NiOx:H/ZrO2/WO3/ITO devices10.1016/j.apsusc.2015.09.056 ↗
12. Properties of NiOx and its influence upon all-thin-film ITO/NiOx/LiTaO3/WO3/ITO electrochromic devices prepared by magnetron sputtering10.1016/j.vacuum.2014.09.007 ↗
13. Electrochromic properties of porous NiO thin film as a counter electrode for NiO/WO3 complementary electrochromic window10.1016/j.electacta.2011.01.078 ↗
14. Anodic electrochromic nickel oxide thin films: decay of charge density upon extensive electrochemical cycling10.1002/celc.201500457 ↗
15. Electrochromic behavior of Ni1−xO thin films in various electrolytes10.1149/06631.0001ecst ↗
16. Electrochromic performances of nonstoichiometric NiO thin films10.1016/j.tsf.2013.10.154 ↗
17. Nanoporous nickel oxide thin films and its improved electrochromic performance: effect of thickness10.1016/j.apsusc.2010.10.037 ↗
18. Optimization study of solid-state electrochromic devices based on WO3/Lithium-Polymer Electrolyte/V2O5 structures10.1149/1.2059226 ↗
19. Effect of temperature on a complementary WO3-Prussian Blue Electrochromic system10.1149/1.2221194 ↗
20. Climatic ageing of components of polymer based electrochromic devices10.3139/217.2657 ↗
21. Modelling switching of electrochromic devices- a route to successful large area device design10.1016/S0167-2738(02)00385-5 ↗
22. Electrochromism of non-stoichiometric NiO thin film: as single layer and in full device10.1007/s00339-016-9923-z ↗