Performance improvement of inverted polymer solar cells thermally evaporating nickel oxide as an anode buffer layer
Source abstract
Abstract
Abstract Nickel oxide (NiO) was thermally evaporated between the active layer and the top anode in inverted polymer solar cells. We demonstrate that NiO behaves as an anode buffer layer. The NiO thin film can module the Schottky barrier and form an ohmic contact at the organic/metal interface, which make it a great holes transport layer. The device performance with NiO of different thicknesses are investigated and compared. The results show that the power conversion efficiency (PCE) increases by fivefold with 2 nm NiO compared to the control cell without NiO. The optimum device performance with 2 nm NiO shows the J sc of 7.92 mA/cm 2 , V oc of 0.46 V, FF of 39.8%, and thus the PCE of 1.45% under AM1.5G illumination of 100 mW/cm 2 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
2. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
3. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
4. A complete process for production of flexible large area polymer solar cells entirely using screenprinting—First public demonstration10.1016/j.solmat.2008.12.001 ↗
5. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
6. Performance and stability of electroluminescent device with self-assembled layers of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) and polyelectrolytes10.1016/j.tsf.2005.08.174 ↗
7. Stability of the interface between indium-tin-oxide and poly (3,4-ethylenedioxythiophene)/poly (styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
8. Observation of degradation processes of Al electrodes in organic electroluminescence devices by electroluminescence microscopy, atomic force microscopy, scanning electron microscopy, and Auger electron spectroscopy10.1063/1.357224 ↗
9. Krebs · Progress in Photovoltaics: Research and Applications · 2007 · 15 · 69710.1002/pip.794 ↗
10. Performance improvement of inverted polymer solar cells with different top electrodes by introducing a MoO3 buffer layer10.1063/1.3026741 ↗
11. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
12. Performance improvement of inverted polymer solar cells using V2O5 as an anode buffer layer10.4028/www.scientific.net/MSF.663-665.865 ↗
13. p-type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
14. Performance improvement of TiO2/P3HT solar cells using CuPc as a sensitizer10.1063/1.2884270 ↗
15. Short-circuit current density improvement of inverted polymer solar cells using PbPc to enhance photon absorption over 600nm10.1016/j.solmat.2010.08.017 ↗
16. Accurate measurement and characterization of organic solar cells10.1002/adfm.200600489 ↗
17. Effect of NiOx thin layer fabricated by oxygen-plasma treatment on polymer photovoltaic cell10.1016/j.solmat.2010.04.077 ↗
18. Thermodynamic and transport properties of stoichiometric and nonstoichiometric nickel oxide10.1149/1.2426441 ↗