journal article·2014-02

On the combined effects of window/buffer and buffer/absorber conduction-band offsets, buffer thickness and doping on thin-film solar cell performance

Giovanna Sozzi, Fabrizio Troni, Roberto Menozzi

Publisher page

Abstract

Abstract In this study we perform an extensive campaign of numerical simulations of thin-film solar cell structures aimed at investigating how the conduction band offsets at buffer/window (ΔBW) and buffer/absorber (ΔAB) heterojunctions and the thickness and doping of the buffer layer combine to affect the performance parameters (Jsc, Voc, FF and η). For the two scenarios of ideal (i.e., without traps) and non-ideal (with traps) buffer/absorber interface, we vary ΔAB and ΔBW in the range −0.5 eV to 0.5 eV, and analyze, for each combination, the physical mechanisms limiting the cell performance and the way to optimize it by choosing optimal buffer doping and thickness. We show that assuming ΔAB as the main indicator for the potential performance of a cell can be misleading because ΔBW can heavily influence performance, even when ΔAB is positive (conduction band higher in the buffer than in the absorber) and near to its theoretical optimal value (0.3 eV). However, we also show that ΔAB 0. We verify our findings by simulating several examples of CIGS-based solar cells with different buffer layers (CdS, Zn1−xMgxO, In2S3, Zn(O,S)) taken from the literature; these comparisons confirm the validity of our results and suggest that the combination of ΔAB and ΔBW is the predominant factor in the design of high-efficiency solar cells. We finally propose simple quantitative guidelines for thin-film solar cell design and optimization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Thin-film solar cells: review of materials, technologies and commercial status
2. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
3. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
4. Buffer layers in Cu(In,Ga)Se2 solar cells and modules10.1016/j.tsf.2004.11.118 ↗
5. F. Troni, G. Sozzi, R. Menozzi, A numerical study of the design of ZnMgO window layer for cadmium-free thin-film CIGS solar cells, in: Proceedings of the 7th Conference on Ph.D. Research in Microelectronics and Electronics (PRIME), 2011, pp. 193–196.10.1109/PRIME.2011.5966250 ↗
6. Control of conduction bans offset in wide-gap Cu(In,Ga)Se2 solar cells10.1016/S0927-0248(02)00120-4 ↗
7. Baseline model of graded-absorber Cu(In,Ga)Se2 solar cell applied to cells with Zn1−xMgxO buffer layers10.1016/j.tsf.2010.12.141 ↗
8. Effects of ZnO:Al films on CIGS PV modules degraded under accelerated damp heat10.1016/j.solmat.2012.05.002 ↗
9. Stability of TCO window layers for thin-film CIGS solar cells upon damp heat exposures—part III10.1117/12.826559 ↗
10. 18.5% copper indium gallium diselenide (CIGS) device using single-layer chemical-bath-deposited ZnS(O,OH)10.1143/JJAP.43.L1475 ↗
11. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
12. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
13. Characterization and modelling of chalcopyrite solar cells10.1016/S0040-6090(00)01736-3 ↗
14. Effect of band offset on the open circuit voltage of heterojunction CuIn1−xGaxSe2 solar cells10.1063/1.1831566 ↗
15. Efficiency limitations for wide-band-gap chalcopyrite solar cells10.1016/j.tsf.2004.11.018 ↗
16. Activation energy of heterojunction diode currents in the limit of interface recombination10.1063/1.3126523 ↗
17. Interface recombination in heterojunction solar cells: influence of buffer layer thickness10.1063/1.3554409 ↗
18. Study of generation–recombination processes by the graph theory
19. Optical characterization of CuIn1−xGaxSe2 alloy thin films by spectroscopic ellipsometry10.1063/1.1581345 ↗
20. The impact of charged grain boundaries on thin-film solar cells and characterization10.1063/1.2042530 ↗
21. Surface passivation of Cu(In,Ga)Se2 using atomic layer deposited Al2O310.1063/1.3675849 ↗
22. G. Sozzi, F. Troni, R. Menozzi, Numerical analysis of the effect of grain size and defects on the performance of CIGS solar cells, in: Proceedings of CS-MANTECH, Portland, OR, May 17–20, 2010, pp. 353–356.
23. F. Troni, F. Dodi, G. Sozzi, R. Menozzi, Modeling of thin-film Cu(In,Ga)Se2 CIGS solar cells, in: Proceedings of SISPAD, Bologna, Italy, September 6–8, 2010, pp. 33–36.10.1109/SISPAD.2010.5604580 ↗
24. Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells—recent achievements, current understanding, and future challenges10.1007/s003390050984 ↗
25. Modeling semiconductor heterojunctions in equilibrium10.1016/0038-1101(82)90195-2 ↗
26. Secondary barriers in CdS–CuIn1−xGaxSe2 solar cells10.1063/1.1850604 ↗
27. M. Lundstrom, Notes on Heterostructure Fundamentals, 〈https://engineering.purdue.edu/~ee606/downloads/T3.PDF〉, 1995.
28. Atomic layer deposition of Zn1−xMgxO buffer layers for Cu(In,Ga)Se2 solar cells10.1002/pip.733 ↗
29. X. Li, A, Kanevce, J.V. Li, I. Repins, B. Egaas, and R. Noufi, Impact of Zn1−x MnxO on Cu(In,Ga)Se2 thin-film solar cells, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference (PVSC), 2009, pp. 305–308.
30. Study on ALD In2S3/Cu(In,Ga)Se2 interface formation10.1002/pip.595 ↗
31. Band gap tuning of ZnO/In2S3 core/shell nanorod arrays for enhanced visible-light-driven photocatalysis10.1021/jp310495j ↗
32. High-efficiency copper indium gallium diselenide (CIGS) solar cells with indium sulfide buffer layers deposited by atomic layer chemical vapor deposition (ALCVD)10.1002/pip.508 ↗
33. Zn(O,S) buffer layers by atomic layer deposition in Cu(In,Ga)Se2 based thin film solar cells: band alignment and sulfur gradient10.1063/1.2222067 ↗
34. Strong valence-band offset bowing of ZnO1−xSx enhances p-type nitrogen doping of ZnO-like alloys10.1103/PhysRevLett.97.146403 ↗
35. The Zn(S,O,OH)/ZnMgO buffer in thin-film Cu(In,Ga)(Se,S)2-based solar cells part II: magnetron sputtering of the ZnMgO buffer layer for in-line co-evaporated Cu(In,Ga)Se2 solar cells10.1002/pip.897 ↗
36. Grain-boundary recombination in Cu(In,Ga)Se2 solar cells10.1063/1.2133906 ↗
37. High efficiency cadmium free Cu(In,Ga)Se2 thin film solar cells terminated by an electrodeposited front contact10.1016/j.solmat.2010.12.009 ↗