Liquid silicate additive for alkaline texturing of mono-Si wafers to improve process bath lifetime and reduce IPA consumption
Source abstract
Abstract
Abstract An improved texturing process is reported for industrial monocrystalline silicon wafers, which uses a small amount of liquid potassium silicate as an additive to the conventional KOH/IPA texturing process. The new silicate additive does not require any other changes to the chemical components and thus can easily be integrated into the standard industrial process. Reflectivity and scanning electron microscope studies confirm that the new process yields smaller pyramidal structures of about 4–6 μm in height, with an improved uniformity across the entire Si surface resulting in a low solar weighted average reflectance (WAR) in the range 11.4–12.2%. Moreover a near three-fold decrease in IPA consumption and a six-fold increase in bath lifetime are achieved by the new texturing process compared to the standard texturing process. For 156 mm×156 mm pseudo-square CZ monocrystalline p-type silicon wafers cell efficiencies of over 18% are achieved with the new texturing process on industrial-grade, screen-printed solar cells fabricated on SERIS' industrial R&D pilot line. This process offers the potential for significant cost reduction in manufacturing of monocrystalline silicon wafer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. On black solar cells on the tetrahedral texturing of a silicon surface
2. Etching roughness for (100) silicon surfaces in aqueous KOH10.1063/1.349263 ↗
3. Surface characteristics of (100) silicon anisotropically etched in aqueous KOH10.1149/1.1836644 ↗
4. The surface texturization of solar cells: a new method using V-grooves with controllable sidewall angles10.1016/0927-0248(92)90126-A ↗
5. TMAH/IPA anisotropic etching characteristics
6. A novel low cost texturization method for large area commercial mono-crystalline silicon solar cells10.1016/j.solmat.2006.06.044 ↗
7. Low-cost texturization of large-area crystalline silicon solar cells using hydrazine mono-hydrate for industrial use10.1016/j.renene.2005.10.002 ↗
8. Ultra-low concentration Na2CO3/NaHCO3 solution for texturization of crystalline silicon solar cells10.1002/pip.1117 ↗
9. Optimization of fabrication process of high efficiency and low cost crystalline silicon solar cell for industrial applications10.1016/j.solmat.2008.10.013 ↗
10. A new texturing technique of monocrystalline silicon surface with sodium hypochlorite10.1016/j.apsusc.2009.06.129 ↗
11. K. Birmann, M. Zimmer, J. Rentsch, Fast alkaline etching of monocrystalline wafers in KOH/CHX, in: Proceedings of the 23th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Valencia, 2008, pp. 1608–1611.
12. K. Wijekoon, T. Weodman, S. Paak, K.M. Williams, Production ready novel texture etching process for fabrication of single crystalline silicon solar cells, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (PVSC), Honolulu, HI, 2010, pp. 3635–3641.10.1109/PVSC.2010.5614441 ↗
13. K. Mayer, T. Orellana Pérez, M. Rostas, M. Schumann, F. Granek, S.W. Glunz, E. Rosenfeld, D. Kray, H. Antoniadis, Aromatic compounds as substitutes for 2-propanol as texturing additive in aqueous alkaline solutions, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Valencia, 2010, pp. 2511–2515.
14. N. Ximello Quiebras, J. Junge, S. Seren, G. Hahn, E. Epple, Up to 20% efficient solar cells on monocrystalline silicon wafers by using a KOH—high boiling alcohol (HBA) texturing solution, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Hamburg, 2011, pp. 849–852.
15. M. Moynihan, C. O'Connor, B. Barr, S. Tiffany, W. Braun, G. Allardyce, J. Rentsch, K. Birmann, IPA free texturing of mono-crystalline solar cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Valencia, 2010, pp. 1332–1336.10.1109/PVSC.2010.5614629 ↗
16. Regulated low cost pre-treatment step for surface texturization of large area industrial single crystalline silicon solar cell10.1016/j.solmat.2010.02.025 ↗
17. Effectiveness of anisotropic etching of silicon in aqueous alkaline solutions10.1016/S0927-0248(00)00414-1 ↗