journal article·2014-11Open access

Durability of solar reflector materials for secondary concentrators used in CSP systems

Aránzazu Fernández-García, M.Elena Cantos-Soto, Marc Röger, Christian Wieckert, Christian Hutter, Lucía Martínez-Arcos

Abstract

Abstract Secondary concentrators are used in solar concentrating systems to redirect solar beams reflected by the primary concentrators to the focal point or line. These components allow to increase the concentrated solar flux density and hence to lower thermal radiation losses. Solar reflectors for secondary concentrators are permanently exposed to environmental conditions, high radiation fluxes and elevated temperatures that potentially cause stress and degradation throughout the time. Therefore, analyzing solar reflectors of secondary concentrators by simulating these conditions is crucial. No previous research works about the durability of solar reflector materials for secondary concentrators have been reported. The present work is focused on studying the degradation of the reflector materials by simulating accelerated aging, caused by several ambient parameters and the effect of concentrated radiation. Both cooled and uncooled systems for secondary concentrators are included in this study. According to results obtained, aluminum reflectors and thin silvered-glass reflectors glued to an aluminum structure showed minimum reflectance losses and structural degradation under the operation conditions of cooled 3D secondary concentrators (tower systems). Following critical aspects to avoid reflector degradation were identified: to select a suitable adhesive material to glue the thin silvered-glass reflector to the support aluminum structure, to properly protect reflectors edges, to design a suitable cooling system and to avoid the combination of high radiation fluxes with mechanical stress. In addition, laminated silvered-glass reflectors have shown to be suitable for uncooled 2D secondary concentrators (Fresnel collectors). Furthermore, a comparison with naturally aged secondary concentrators using silvered-glass reflectors glued to an aluminum structure revealed that the simulated degradation under accelerated conditions performed in this work did reproduce the most frequent degradation patterns suffered in real operating conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Advances in solar thermal electricity technology10.1016/S0038-092X(03)00102-6 ↗
2. Advances in parabolic trough solar power technology10.1115/1.1467922 ↗
3. Parabolic-trough solar collectors and their applications10.1016/j.rser.2010.03.012 ↗
4. Solar energy in thermochemical processing
5. Solar Thermal Electricity, Strategic Research Agenda 2020–2025, Brussels, December 2012.
6. A. Meier, C. Sattler, Solar Fuels from Concentrated Sunlight, IEA SolarPaces Implementing Agreement, Tabernas, 2009.
7. Hinterberger · Rev. Sci. Instrum. · 1966 · 37 · 109410.1063/1.1720428 ↗
8. Winston · 2005
9. Optical and thermal properties of compound parabolic concentrators10.1016/0038-092X(76)90069-4 ↗
10. Solar tower reflector systems: a new approach for high temperature solar plants10.1016/S0360-3199(97)00059-1 ↗
11. The optics of the solar tower reflector10.1016/S0038-092X(00)00137-7 ↗
12. Optical durability of candidate solar reflectors10.1115/1.1861926 ↗
13. Modelling of optical durability of enhanced aluminum solar reflectors10.1016/j.solmat.2012.07.027 ↗
14. Solar-hybrid gas turbine-based power tower systems (REFOS)10.1115/1.1445444 ↗
15. Assessment of the potential improvement due to multiple apertures in central receiver systems with secondary concentrators10.1016/j.solener.2005.02.012 ↗
16. European Commission, SOLGATE – solar hybrid gas turbine electric power system, Final Publishable Report, Contract ENK5-CT-2000-00333, 2006.
17. ISO 9227, Corrosion tests in artificial atmospheres – Salt spray test, International Organization for Standardization, ISO, 2006.
18. IEC 61215, Crystalline silicon terrestrial photovoltaic (pv) modules – design qualification and type approval, International Electrotechnical Commission, IEC, 2005.
19. ISO 6270-2, Paints and varnishes – Determination of resistance to humidity – Part 2: Procedure for exposing test specimens in condensation-water atmospheres, International Organization for Standardization, ISO, 2005.
20. C. Hutter, C. Wieckert, A. Fernández-García, Thermal testing of solar mirrors for secondary concentrators (SFERA Work Package 13, Task 2, Subtask Hardware), Technical Report, PSI, Switzerland, 2011. Available at: 〈http://sfera.sollab.eu/downloads/JRA/WP13/R13.5a_SFERA_WP13_T2B_Report_thermal_tests.pdf〉.
21. A 50-kW 11,000-suns novel high-flux solar simulator based on an array of Xenon arc lamps10.1115/1.2769701 ↗
22. S. Meyen et al., Parameters and method to evaluate the solar reflectance properties of reflector materials for concentrating solar power technology – SolarPACES Reflectance Guideline actual version 2.5, Almería, June 2013. Available at: 〈http://www.solarpaces.org/〉 Tasks/Task3/reflectance_guideline.htm.
23. S. Meyen, A. Fernández-García, C. Kennedy, E. Lüpfert, Standardization of solar reflector reflectance measurements – round robin test, SolarPACES 2010, Perpignan, September, 2010, pp. 21–24.
24. Devices and Services, Portable Specular Reflectometer Model 15R-USB. Operation and Maintenance Manual, Devices and Services, Dallas, 2009.
25. J.L. Taylor, Reflectance Measurements of Materials Used in Solar Industry, Perkin-Elmer, Shelton, 2009.
26. ISO 9050, Glass in building – determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors, International Organization for Standardization, ISO, 2003.
27. ASTM G173-03: 2003. Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface, American Society for Testing and Materials, ASTM, 2003.
28. 3D light microscope by ZEISS, Axio CSM 700 Operating Manual, Carl Zeiss Microlmaging GmbH., Jena, 2010.