journal article·2011-03

Electrochromic interference filters fabricated from dense and porous tungsten oxide films

B. Baloukas, J.-M. Lamarre, L. Martinu

Publisher page

Abstract

Abstract Smart windows offer an opportunity to reduce energy consumption. However, the use of multiple optical elements, such as low emittance coatings and electrochromic devices, is detrimental to the luminous transmittance of these high performance windows. Although the addition of antireflective coatings has helped to reduce this problem, some elements, such as high index of refraction materials still give rise to loss of light. We show that replacing the single WO3 active coating, the main component of an electrochromic device, by an appropriately designed electrochromic interference filter can significantly increase the transmittance. This active filter is based on a stack of dense and porous WO3 layers. We first study the effect of porosity on the physical and electrochromic properties of WO3 prepared by radio frequency magnetron sputtering. We demonstrate that the overlying dense coating does not inhibit the coloration of the underlying porous coating. The best performing films are combined into a 27 layer quarter-wave interference filter which is shown to cycle between bleached and colored states, while providing attractive transmission. Finally, we discuss various filter designs which can increase the transmission of an electrochromic device in its bleached state, as well as the potential use of active filters for optical security devices possessing two levels of authentication.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · Optical Wireless Communication Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. E.S. Lee, S.E. Selkowitz, R.D. Clear, D.L. DiBartolomeo, J.H. Klems, L.L. Fernandes, G.J. Ward, V. Inkarojrit, M. Yazdanian, Advancement of electrochromic windows, California Energy Commission, CEC-500-2006-052, PIER, 2006.10.2172/899732 ↗
2. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
3. The effect on transparency and light scattering of dip coated antireflection coatings on window glass and electrochromic foil10.1016/j.solmat.2010.02.007 ↗
4. Thermochromic VO2-based multilayer films with enhanced luminous transmittance and solar modulation10.1002/pssa.200881798 ↗
5. Macleod · 2001
6. The microstructure of sputter-deposited coatings10.1116/1.573628 ↗
7. Electrochromic and morphological investigation of dry-lithiated nanostructured tungsten trioxide thin films10.1016/j.tsf.2007.05.006 ↗
8. Single-material inhomogeneous optical filters based on microstructural gradients in plasma-deposited silicon nitride10.1364/AO.43.000097 ↗
9. OpenFilters: open-source software for the design, optimization, and synthesis of optical filters
10. Depth profiling of hydrogen using the high efficiency ERD-TOF technique10.1016/0168-583X(92)95579-G ↗
11. The effect of water on the electrochromic properties of WO3 films prepared by vacuum and chemical methods10.1016/j.solmat.2004.02.019 ↗
12. Granqvist · 1995
13. Optical indices of refraction of WO310.1103/PhysRev.113.1008 ↗
14. Plasma treatment of porous SiNx:H films for the fabrication of porous-dense multilayer optical filters with tailored interfaces10.1063/1.2202692 ↗
15. Studies on the correlation between electrochromic colouration and the relative density of tungsten trioxide (WO3−x) thin films prepared by electron beam evaporation
16. Electrochromism of atmospheric evaporated tungsten oxide films (AETOF)10.1143/JJAP.23.754 ↗
17. A model for electrochromic tungstic oxide microstructure and degradation10.1149/1.2127350 ↗
18. Charge movement through electrochromic thin-film tungsten trioxide10.1080/10408439991329198 ↗
19. Analysis of the influence of the gas pressure during the deposition of electrochromic WO3 films by reactive r.f. sputtering of W and WO3 target10.1016/S0927-0248(98)00136-6 ↗
20. Electrical properties and morphology of obliquely deposited electrochromic WO3 films10.1016/0040-6090(86)90346-9 ↗
21. Model of electrochromic and related phenomena in tungsten oxide thin films10.1007/s10008-002-0315-2 ↗
22. Monk · 2007
23. Progress in electrochromics: tungsten oxide revisited10.1016/S0013-4686(99)00016-X ↗
24. Model for the bleaching of WO3 electrochromic films by an electric field10.1063/1.88464 ↗
25. Active metameric security devices using an electrochromic material10.1364/AO.50.000C41 ↗
26. Site-saturation model for the optical efficiency of tungsten oxide-based devices10.1149/1.1837080 ↗
27. The influence of microstructure on the electrochromic properties of LixWO3 thin films: part I. Ion diffusion and electrochromic properties10.1557/JMR.1993.2649 ↗
28. The electrochromic process at WO3 electrodes prepared by vacuum evaporation and anodic oxidation of W10.1149/1.2129091 ↗
29. Electrochemical properties of WO3·x(H2O), I. The influences of water adsorption and hydroxylation10.1149/1.2119570 ↗
30. Electrochromism of fluorinated electron-bombarded tungsten oxide films10.1063/1.360169 ↗
31. Berns · 2001
32. Metameric interference security image structures10.1364/AO.47.001585 ↗
33. Electrochromism in evaporated WO3-MoO3–V2O5 films10.1002/ecja.4410650814 ↗
34. Optical properties of cermets consisting of metal in a WO3 matrix10.1016/0378-4371(89)90320-8 ↗
35. Influence of Pt and Au nanophases on electrochromism of WO3 in nanostructure thin-film electrodes10.1016/j.elecom.2007.05.027 ↗
36. Tunable electrochromic photonic crystals10.1063/1.1929079 ↗