journal article·2003-09

Mechanically manufactured selective solar absorber surfaces

P. Konttinen, P.D. Lund, R.J. Kilpi

Publisher page

Abstract

Abstract This study describes the development of manufacturing processes for a mechanically manufactured selective C/Al2O3/Al surface and its basic characterization. The composition and structure of the surfaces were characterized by scanning electron microscopy and electron microprobe analysis. Spectroradiometer and FTIR-spectrometer were used for optical characterization. The manufacturing process has been developed from manual abrasive grinding followed with an acid bath to mechanically operated grinding alone. The surface consists mainly of Al2O3, with some C adsorbed on the surface during the grinding process. The microstructure of the surface consists of small grooves, organized in a heterogeneous two-dimensional matrix. The width of the grooves varies typically between 1 and 2 μm. The absorptance of a surface from the latest stage of development is 0.90 and the emittance 0.25.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Tabor · Bull. Res. Counc. Isr. · 1955 · 5A · 119
2. A. Ignatiev, P. Oneill, G. Zajag, Sol. Energy Mater. 1 (1979) 69–79.10.1016/0165-1633(79)90058-3 ↗
3. C.M. Lampert, J. Washburn, Sol. Energy Mater. 1 (1979) 81–92.10.1016/0165-1633(79)90059-5 ↗
4. P.M. Driver, Sol. Energy Mater. 4 (1981) 179–202.10.1016/0165-1633(81)90041-1 ↗
5. O.T. Inal, M. Valayapetre, L.E. Murr, Sol. Energy Mater. 4 (1981) 333–358.10.1016/0165-1633(81)90070-8 ↗
6. P.M. Driver, P.G. McGormick, Sol. Energy Mater. 6 (1982) 159–173.10.1016/0165-1633(82)90017-X ↗
7. J. Quintana, P.J. Sebastian, Sol. Energy Mater. Sol. Cells 33 (1994) 465–474.10.1016/0927-0248(94)90006-X ↗
8. M. Koltun, G. Gukhman, A. Gavrilina, Sol. Energy Mater. Sol. Cells 33 (1994) 41–44.10.1016/0927-0248(94)90287-9 ↗
9. C. Cella, A. Kaba, S. Berthier, J. Lafait, Sol. Energy Mater. 16 (1987) 143–154.10.1016/0165-1633(87)90015-3 ↗
10. J.H. Schön, G. Binder, E. Bucher, Sol. Energy Mater. Sol. Cells 33 (1994) 403–416.10.1016/0927-0248(94)90001-9 ↗
11. Q.C. Zhang, Sol. Energy Mater. Sol. Cells 52 (1998) 95–106.10.1016/S0927-0248(97)00274-2 ↗
12. M. Farooq, A.A. Green, M.G. Hutchins, Sol. Energy Mater. Sol. Cells 54 (1998) 67-73.10.1016/S0927-0248(97)00265-1 ↗
13. Z.C. Orel, B. Orel, M.K. Gunde, Sol. Energy Mater. Sol. Cells 26 (1992) 105-116.10.1016/0927-0248(92)90130-H ↗
14. Z.C. Orel, N. Leskovšek, B. Orel, M.G. Hutchins, Sol. Energy Mater. Sol. Cells 40 (1996) 197–204.10.1016/0927-0248(95)00087-9 ↗
15. Z.C. Orel, M.K. Gunde, Sol. Energy Mater. Sol Cells 61 (2000) 445–450.10.1016/S0927-0248(99)00155-5 ↗
16. Lampert · Sol. Energy Mater. · 1979 · 1 · 31910.1016/0165-1633(79)90001-7 ↗
17. R. Kirchner, M.Ch. Lux-Steiner, E. Liebemann, E. Bucher, Sol. Energy Mater. Sol. Cells 33 (1994) 453–464.10.1016/0927-0248(94)90005-1 ↗
18. S. Süzer, F. Kadirgan, H.M. Söhmen, A.J. Wetherilt, I.E. Türe, Sol. Energy Mater. Sol. Cells 52 (1998) 55–60.10.1016/S0927-0248(97)00270-5 ↗
19. T. Möller, D. Hönicke, Solar Energy Materials and Solar Cells 54 (1998) 397–403.10.1016/S0927-0248(98)00091-9 ↗
20. Möller · J. Sol. Energy Eng. · 2000 · 122 · 10110.1115/1.1287500 ↗
21. S. Wernick, R. Pinner, P.G. Sheasby, The Surface Treatment and Finishing of Aluminium and its Alloys, 5th Edition, ASM International, Ohio, USA, 1987, pp. 729–772.
22. P. Konttinen, P.D. Lund, Characterization of selective absorbers prepared through a mechanical treatment, World Renewable Energy Congress VII, Cologne, Germany, 29 June–5 July, 2002.
23. A. Roos, et al. Minisymposium on Optical Measurements of Reflectance and Transmittance, Uppsala, Sweden, 2.-3.5.2000.
24. Duffie · 1991