Fast-switching quasi-solid state electrochromic full device based on mesoporous WO3 and NiO thin films
Source abstract
Abstract
Abstract Mesoporous tungsten trioxide (WO3) and nickel oxide (NiO) electrochromic (EC) thin films have been fabricated by sol-gel method with assistant of tri-block copolymer [PEO132PEO50PEO132] (F108). By controlling weight ratio of F108 and calcination temperatures, uniform and transparent mesoporous films are fabricated. Both WO3 and NiO films are comprised by nanoparticles with diameters of ca.10 nm, mesopores with pore size of approximately 6 nm are distributed in the films. The thickness of the films are ca. 400 nm. The as-prepared films have ultra-fast switching time during EC redox reactions. Applied with positive and negative voltages of 40 s respectively, the coloration/bleaching time of WO3 and NiO films are 5.7 s/2.3 s and 0.9 s/3.8 s, which is faster than that of comparative EC films fabricated by sol-gel method without F108 (coloration/bleaching time of WO3 and NiO films are 17.5 s/14.5 s and 13.6 s/4.9 s) and EC films fabricated by magnetron sputtering method (coloration/bleaching time of WO3 and NiO films are 29.4 s/21.3 s and 9.6 s/7.5 s). Quasi-solid state electrochromic device assembled with mesoporous WO3 and NiO thin films has excellent EC performance, such as fast switching speed (3.2/1.1 s for coloration/bleaching time), large optical modulation of about 45% (at 600 nm), high coloration efficiency (130.8 cm2/C at the wavelength of 600 nm) and good cycle stability. These excellent properties are derived from mesoporous channels in the films. For the mesoporous channels can shorten the diffusion paths and make it easier for ions to transport in films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Conducting polymers and applications · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Gasochromic smart window: optical and thermal properties, energy simulation and feasibility analysis10.1016/j.solmat.2015.09.029 ↗
2. Motion-driven electrochromic reactions for self-powered smart window system10.1021/acsnano.5b00706 ↗
3. Electrochromic materials and devices for energy efficiency and human comfort in buildings: a critical review10.1016/j.electacta.2017.11.169 ↗
4. Large area Co-assembly of nanowires for flexible transparent smart windows10.1021/jacs.7b03227 ↗
5. Electrochromic organic and polymeric materials for display applications10.1016/j.displa.2005.03.003 ↗
6. A renewable display platform based on the bipolar electrochromic electrode10.1002/celc.201500282 ↗
7. An all-solid-state electrochromic device based on NiO/WO3 complementary structure and solid hybrid polyelectrolyte10.1016/j.solmat.2009.06.025 ↗
8. Inkjet-printed all solid-state electrochromic devices based on NiO/WO3 nanoparticle complementary electrodes10.1039/C5NR06995E ↗
9. Electrolytes-relevant cyclic durability of nickel oxide thin films as an ion-storage layer in an all-solid-state complementary electrochromic device10.1016/j.solmat.2016.07.022 ↗
10. Hierarchical NiO microflake films with high coloration efficiency, cyclic stability and low power consumption for applications in a complementary electrochromic device10.1039/c3nr00887h ↗
11. Electrochromic Ni1-xO pigment coatings and plastic film-based Ni1-xO/TiO2 device with transmissive light modulation10.1016/j.solmat.2012.08.012 ↗
12. A complementary electrochromic device based on W18O49 nanowire arrays and Prussian blue thin films10.1039/C5RA16056A ↗
13. Solid-state electrochromic devices using pTMC/PEO blends as polymer electrolytes10.1016/j.electacta.2009.03.031 ↗
14. Enhanced electrochromic performance of 2D thin films by lithium and tantalum co-doping10.1016/j.jallcom.2018.02.232 ↗
15. Dual band electrochromic devices based on Nb-doped TiO2 nanocrystalline electrodes10.1021/acsnano.6b06664 ↗
16. The electrochromic properties of mesoporous WO3-polythiophene film devices with composite electrolytes10.1007/s10854-015-4190-x ↗
17. Facile preparation of aqueous suspensions of WO3/sulfonated PEDOT hybrid nanoparticles for electrochromic applications10.1039/C6CC03813A ↗
18. Fast-switching electrochromic properties of mesoporous WO3 films with oxygen vacancy defects10.1039/C7NR06796H ↗
19. Enhanced electrochromic and energy storage performance in mesoporous WO3 film and its application in a bi-functional smart window10.1039/C8NR00790J ↗
20. The influence of sol-gel processing on the electrochromic properties of mesoporous WO3 films produced by ultrasonic spray deposition10.1016/j.solmat.2013.11.002 ↗
21. Electrochromic WO3-x films with reduced lattice deformation stress and fast response time10.1016/j.electacta.2006.10.032 ↗
22. Large cation model of dissociative reduction of electrochromic WO3-x films
23. Tunable pseudogaps in electrochromic WO3 inverted opal photonic crystals10.1063/1.2397012 ↗
24. Improved electrochromic performance of ordered macroporous tungsten oxide films for IR electrochromic device10.1016/j.solmat.2012.01.028 ↗
25. Enhanced electrochromic performance of highly ordered, macroporous WO3 arrays electrodeposited using polystyrene colloidal crystals as template10.1016/j.electacta.2013.03.099 ↗
26. Fabrication of a novel 2D-graphene/2D-NiO nanosheet-based hybrid nanostructure and its use in highly sensitive NO2 sensors10.1016/j.snb.2013.05.050 ↗
27. High-performance flexible electrochromic device based on facile semiconductor-to-metal transition realized by WO3 center dot 2H2O ultrathin nanosheets
28. Template synthesis of NiO ultrathin nanosheets using polystyrene nanospheres and their electrochromic properties10.1039/C5RA04571A ↗
29. Electrochromic properties of tungsten oxide nanowires fabricated by electrospinning method10.1016/j.solmat.2009.02.008 ↗
30. Ultra-thin WO3 nanorod embedded polyaniline composite thin film: synthesis and electrochromic characteristics10.1016/j.solmat.2013.02.025 ↗
31. Fast switching and high contrast electrochromic device based on PEDOT nanotube grown on ZnO nanowires10.1016/j.solmat.2013.01.021 ↗
32. Enhanced photochromic efficiency of transparent and flexible nanocomposite films based on PEO-PPO-PEO and tungstate hybridization10.1039/C4TC01987C ↗
33. Efficient electrochromic materials based on TiO2@WO3 core/shell nanorod arrays10.1016/j.solmat.2013.05.049 ↗
34. The fabrication of oriented organic-inorganic ultrathin films with enhanced electrochromic properties10.1039/C6TC02177H ↗
35. Enhanced transmittance modulation of ITO/NiOx/ZrO2:H/WO3/ITO electrochromic devices10.1007/s11581-015-1591-z ↗
36. Electrochromic tungsten oxide films: review of progress 1993-199810.1016/S0927-0248(99)00088-4 ↗
37. Electrochemical and electrochromic properties of novel nanoporous NiO/V2O5 hybrid film10.1016/j.solmat.2014.09.033 ↗
38. Charge-transfer kinetics and cyclic properties of inorganic all-solid-state electrochromic device with remarkably improved optical memory10.1016/j.solmat.2017.09.012 ↗