journal article·2016-01

Protection of Si photocathode using TiO2 deposited by high power impulse magnetron sputtering for H2 evolution in alkaline media

Dowon Bae, Seyedmohammad Shayestehaminzadeh, Einar B. Thorsteinsson, Thomas Pedersen, Ole Hansen, Brian Seger, Peter C.K. Vesborg, Sveinn Ólafsson, Ib Chorkendorff

Publisher page

Abstract

Abstract Si is an excellent absorber material for use in photoelectrochemical (PEC) hydrogen production. Only a few studies have been done using Si in alkaline electrolyte for hydrogen evolution due to its poor chemical stability in high pH electrolyte, indicating that a chemically stable protection layer is essential. Here we investigate thin TiO2 films deposited by high power impulse magnetron sputtering (HiPIMS) as a protection layer for a p-type silicon photocathode for photoelectrochemical H2 evolution in a high pH electrolyte. The X-ray reflectometry analysis reveals that the HiPIMS process provides improved film density for TiO2 films (4.15 g/cm3), and consequently results in a significantly less corroded Si surface. The Si photocathode protected by the HiPIMS grown TiO2 film along with Pt as co-catalyst produced a photocurrent onset potential of ~0.5 V vs. RHE in 1 M KOH and showed a 4% decay over 24 h in KOH. In contrast, the sample with the TiO2 deposited using conventional DC sputtering technique of similar thickness shows 20% loss in photocurrent for the same time interval. Considering the fact that the experiments were carried out not in the cleanroom, much less corrosion loss can be obtained if done in dust-free condition. Hence, these results suggest the HiPIMS technique as an improved approach for the protection of photoelectrodes, which are unstable in alkaline solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic and Structural Properties of Oxides · Advanced Photocatalysis Techniques · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Photoelectrochemical decomposition of water using modified monolithic tandem cells10.1016/S0360-3199(98)00052-4 ↗
2. Crystalline TiO2: a generic and effective electron-conducting protection layer for photoanodes and -cathodes10.1021/acs.jpcc.5b04407 ↗
3. Photoelectrochemical hydrogen evolution using Si microwire arrays10.1021/ja108801m ↗
4. Hydrogen evolution from a copper(I) oxide photocathode coated with an amorphous molybdenum sulphide catalyst10.1038/ncomms4059 ↗
5. Photocatalytic water splitting to produce hydrogen using multi-junction solar cell with different deposited thin films10.1016/j.solmat.2012.07.003 ↗
6. CIGS based devices for solar hydrogen production spanning from PEC-cells to PV-electrolyzers: a comparison of efficiency, stability and device topology10.1016/j.solmat.2014.11.041 ↗
7. Designing active and stable silicon photocathodes for solar hydrogen production using molybdenum sulfide nanomaterials10.1002/aenm.201400739 ↗
8. Using TiO2 as a conductive protective layer for photocathodic H2 evolution10.1021/ja309523t ↗
9. Back-illuminated Si photocathode: a combined experimental and theoretical study for photocatalytic hydrogen evolution10.1039/C4EE03723E ↗
10. Iron-treated NiO as a highly transparent p-type protection layer for efficient Si-based photoanodes10.1021/jz501872k ↗
11. High-performance silicon photoanodes passivated with ultrathin nickel films for water oxidation10.1126/science.1241327 ↗
12. Addressing the terawatt challenge: scalability in the supply of chemical elements for renewable energy10.1039/c2ra20839c ↗
13. Efficient solar water splitting by enhanced charge separation in a bismuth vanadate-silicon tandem photoelectrode10.1038/ncomms3195 ↗
14. Stable solar-driven water oxidation to O2(g) by Ni-oxide-coated silicon photoanodes10.1021/jz5026195 ↗
15. Efficient and sustained photoelectrochemical water oxidation by cobalt oxide/silicon photoanodes with nanotextured interfaces10.1021/ja501513t ↗
16. Amorphous TiO2 coatings stabilize Si, GaAs, and GaP photoanodes for efficient water oxidation10.1126/science.1251428 ↗
17. Solution-deposited F:SnO2/TiO2as a base-stable protective layer and antireflective coating for microtextured buried-junction H2-evolving Si photocathodes10.1021/am506999p ↗
18. J. Feng, M. Gong, M.J. Kenney, J.Z. Wu, B. Zhang, Y. Li, H. Dai, Nickel coated silicon photocathode for water splitting in alkaline electrolytes, Nano Res., doi:10.1007/s12274-014-0643-4.10.1007/s12274-014-0643-4 ↗
19. Silicon protected with atomic layer deposited TiO2: durability studies of photocathodic H2 evolution10.1039/c3ra45966g ↗
20. Atomic layer-deposited tunnel oxide stabilizes silicon photoanodes for water oxidation10.1038/nmat3047 ↗
21. Photoelectrochemical behavior of n-type Si(100) electrodes coated with thin films of manganese oxide grown by atomic layer deposition10.1021/jp311207x ↗
22. Atomic layer deposition chemistry: recent developments and future challenges10.1002/anie.200301652 ↗
23. High power pulsed magnetron sputtering: a review on scientific and engineering state of the art10.1016/j.surfcoat.2009.11.013 ↗
24. High power impulse magnetron sputtering discharge10.1116/1.3691832 ↗
25. Influence of high power densities on the composition of pulsed magnetron plasmas10.1016/S0042-207X(01)00475-4 ↗
26. Time-resolved investigation of dual high power impulse magnetron sputtering with closed magnetic field during deposition of Ti–Cu thin films10.1063/1.3467001 ↗
27. High power pulsed magnetron sputtered CrNx films10.1016/S0257-8972(02)00479-6 ↗
28. D. Bae, S. Shayestehaminzadeh, E.B. Thorsteinsson, T. Pedersen, O. Hansen, B. Seger, P. C.K. Vesborg, S. Olafsson, I. Chorkendorff, Data supporting the TiO2 protected Si photocathode for hydrogen evolution in alkaline media, submitted to Data in Brief.
29. Surface studies of solids by total reflection of x-rays10.1103/PhysRev.95.359 ↗
30. Sunlight absorption in water – efficiency and design implications for photoelectrochemical devices10.1039/C4EE01753F ↗
31. Analysis of the impact of individual glass constituents on electrocatalysis on Pt electrodes in alkaline solution10.1149/1.2904882 ↗
32. Impact of glass corrosion on the electrocatalysis on Pt electrodes in alkaline electrolyte10.1149/1.2800752 ↗
33. Influence of calcination temperature on anatase to rutile phase transformation in TiO2 nanoparticles synthesized by the modified sol–gel method10.1016/j.matlet.2012.05.092 ↗
34. Effect of heat treatment on the structure of titanium dioxide films10.1134/S1063785010100202 ↗
35. Scherrer after sixty years: a survey and some new results in the determination of crystallite size10.1107/S0021889878012844 ↗
36. Relationship between synthesis conditions and photocatalytic activity of nanocrystalline TiO210.1155/2012/427453 ↗
37. The effect of calcination temperature on the crystallinity of TiO2 nanopowders10.1016/S0022-0248(02)01938-3 ↗
38. Time-resolved ionisation studies of the high power impulse magnetron discharge in mixed argon and nitrogen atmosphere10.1002/ppap.200730806 ↗
39. Atomic assembly of magnetoresistive multilayers
40. D. Windover, E. Barnat, J.Y. Kim, M. Nielsen, T.-M. Lu, A. Kumar, H. Bakhru, C. Jin, S.L. Lee, Thin film density determination by multiple radiation energy dispersive X-ray reflectivity, in: JCPDS – International Center of Diffraction Data 2000, Advances in X-ray Analysis, Vol. 42
41. Ionization of sputtered metals in high power pulsed magnetron sputtering10.1116/1.1818135 ↗
42. Influence of catalyst on structural and morphological properties of TiO2 nanostructured films prepared by sol–gel on glass10.1016/j.pnsc.2013.01.012 ↗
43. L. Borucki, R. Mann, G. Miles, J. Slinkman, T. Sullivan, A model for titanium silicide film growth, in: International Electron Devices Meeting Technology Digest, 1988, pp. 348–35110.1109/IEDM.1988.32828 ↗
44. Engineering metallic nanostructures for plasmonics and nanophotonics10.1088/0034-4885/75/3/036501 ↗
45. Hornyak · 2008
46. Annealing dependence of residual stress and optical properties of TiO2 thin films deposited by different deposition methods10.1364/AO.47.00C284 ↗
47. Effect of calcination temperature on the photocatalytic activity and adhesion of TiO2 films prepared by the P-25 powder-modified sol–gel method10.1016/j.molcata.2005.08.056 ↗
48. Bio-inspired co-catalysts bonded to a Silicon photocathode for solar hydrogen evolution10.1038/nmat3008 ↗
49. Impact of metal contamination in silicon solar cells10.1002/adfm.201000849 ↗
50. B. Sopori, Impurities and Defects in Photovoltaic Si Devices: A review, NREL Report, NREL/CP-520-27524, 1999