journal article·2016-08

Thermal conductivity enhancement of recycled high density polyethylene as a storage media for latent heat thermal energy storage

C. Yang, M.E. Navarro, B. Zhao, G. Leng, G. Xu, L. Wang, Y. Jin, Y. Ding

Publisher page

Abstract

Abstract In the context of reducing CO2 emissions and balancing energy supply and demand across the electricity grid, energy storage has become an important topic. Therefore, new energy policies are looking for more efficient and environmental friendly technologies. The aim of this research is to assist in the implementation of the renewable energies technologies and to improve the energy efficiency in well-known and established processes by recovering and storing heat. Moreover, the use of a recycled material as a storage media for thermal energy storage applications shows a more sustainable use of resources reducing at the same time the overall cost. In this research a novel composite, a recycled high density polyethylene (HDPE)/graphite(Cg) mixture, for medium temperature thermal energy storage application has been formulated and characterized. One common characteristic of polymers is their low thermal conductivities. This causes a slow thermal response when the PCM is used in high power applications. In this study the thermal conductivity properties of the HDPE/Cg were enhanced by the optimization of its manufacturing process and composition. Graphite content was added in different mass fractions into the PCM, and thermal properties were measured by means of Thermogravimetric analysis (TGA), Differential scanning calorimetry (DSC) and Laser Flash Analysis (LFA). The experimental results showed that the thermal conductivities are improved by the higher mass fraction of graphite. When the graphite content was in the ratio of 20 wt%, the thermal conductivity of the PCM increased from 0.51 W m−1 K−1 up to 1.31 W m−1 K−1. The secondary electron microscopy confirms a good homogeneity of the manufacturing process. Further chemical stability analysis was performed by means of charging and discharging processes. The cycled samples present good thermal property reliability at temperatures up to 250 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
2. Solar dryers with PCM as energy storage medium: a review10.1016/j.rser.2014.01.073 ↗
3. A review on effect of phase change material encapsulation on the thermal performance of a system10.1016/j.rser.2012.05.037 ↗
4. Development of phase change materials based microencapsulated technology for buildings: a review10.1016/j.rser.2010.10.006 ↗
5. Literature review on the use of phase change materials in glazing and shading solutions10.1016/j.rser.2015.07.201 ↗
6. Phase change material (PCM) storage for free cooling of buildings—a review10.1016/j.rser.2012.10.034 ↗
7. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
8. Review on phase change material based free cooling of buildings—the way toward sustainability10.1016/j.est.2015.09.003 ↗
9. A review on energy conservation in building applications with thermal storage by latent heat using phase change materials10.1016/S0196-8904(03)00131-6 ↗
10. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications10.1016/S1359-4311(02)00192-8 ↗
11. Thermal energy storage: challenges and the role of particle technology10.1016/j.partic.2014.03.003 ↗
12. Thermal conductivity enhancement of phase change materials for thermal energy storage: a review10.1016/j.rser.2010.08.007 ↗
13. Heat transfer enhancement in latent heat thermal energy storage system by using the internally finned tube10.1016/0017-9310(95)00402-5 ↗
14. Experimental investigations on the characteristics of melting processes of stearic acid in an annulus and its thermal conductivity enhancement by fins10.1016/j.enconman.2004.05.012 ↗
15. Experimental analysis and numerical modelling of inward solidification on a finned vertical tube for a latent heat storage unit10.1016/S0038-092X(96)00167-3 ↗
16. Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder10.1016/S1359-4311(00)00002-8 ↗
17. Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material10.1016/S0017-9310(00)00309-4 ↗
18. Approximate analytical model for solidification in a finite PCM storage with internal fins10.1016/S0307-904X(03)00080-5 ↗
19. Experimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit10.1016/j.ijheatmasstransfer.2014.11.022 ↗
20. Heat conduction enhanced shape-stabilized paraffin/HDPE composite PCMs by graphite addition: preparation and thermal properties10.1016/j.solmat.2010.05.020 ↗
21. Experimental and numerical study on phase change material (PCM) for thermal management of mobile devices10.1016/j.applthermaleng.2015.12.056 ↗
22. Application of TCE-PCM based heat sinks for cooling of electronic components: a review10.1016/j.rser.2015.12.238 ↗
23. Heat transfer enhancement in latent heat thermal storage systems: comparative study of different solutions and thermal contact investigation between the exchanger and the PCM10.1016/j.apenergy.2016.01.012 ↗
24. Phase change materials and thermal energy storage for buildings10.1016/j.enbuild.2015.06.007 ↗
25. T. Elements, Springer Handbook of Condensed Matter and Materials Data, in: W. Martienssen, H. Warlimont (Eds.). XVIII, 1120 pp. 1025 illustration with CD-ROM. 3-540-44376-2, Springer, Berlin , 2005. 1139. http://dx.doi.org/10.1007/3-540-30437-1.10.1007/3-540-30437-1 ↗
26. Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material10.1007/s002310050126 ↗
27. Effective thermal conductivity of expanded graphite–CaCl2 composite adsorbent for chemical adsorption chillers10.1016/j.enconman.2005.09.005 ↗
28. Improvement of thermal characteristics of latent heat thermal energy storage units using carbon-fiber brushes: experiments and modeling10.1016/S0017-9310(03)00290-4 ↗
29. Thermal response in thermal energy storage material around heat transfer tubes: effect of additives on heat transfer rates10.1016/j.solener.2003.07.028 ↗
30. Anisotropic heat transfer in composites based on high-thermal conductive carbon fibers10.1016/j.energy.2004.04.024 ↗
31. Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: preparation and thermal properties10.1016/j.enconman.2003.10.022 ↗
32. Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivity10.1016/S0196-8904(01)00010-3 ↗
33. Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material10.1016/j.applthermaleng.2006.11.004 ↗
34. Influence of additives on thermal conductivity of shape-stabilized phase change material10.1016/j.solmat.2005.09.007 ↗
35. Comparison of LDPE, LLDPE and HDPE as matrices for phase change materials based on a soft Fischer–Tropsch paraffin wax10.1016/j.tca.2010.01.002 ↗
36. Thermal degradation of crosslinked high density polyethylene10.1016/S0141-3910(98)00098-6 ↗
37. Lobo · 2003
38. A new approach to modelling the effective thermal conductivity of heterogeneous materials10.1016/j.ijheatmasstransfer.2006.02.007 ↗
39. A modified Maxwell-Eucken equation for calculating the thermal conductivity of two-component solutions or mixtures10.1016/0140-7007(81)90053-0 ↗