Controlled electro-spray deposition of highly conductive PEDOT:PSS films
Source abstract
Abstract
Abstract Electro-spray (e-spray) is emerging as an attractive printing method because of its simple apparatus and high productivity for the thin-film fabrication of conjugated polymer materials. We report here a study of the e-spray deposition conditions of highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films. The highest conductivity of 800 S/cm was achieved by independently optimizing the process parameters such as the solvent dilution ratio, the amount of additive, and the substrate temperature. Although the conductivity was largely governed by the morphologies of the deposited films, we found that in e-spray deposition, pure electrical scattering (irrespective of the specific morphology) also influenced the macroscopic conductivities. Using the optimized e-spraying conditions, we fabricated a top PEDOT:PSS electrode for a semitransparent inverted organic solar cells (OSCs) without any performance degradation in the underlying photoactive layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Solution-processed organic solar cells10.1557/mrs2008.138 ↗
2. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
3. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
4. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
5. High-resolution inkjet printing of all-polymer transistor circuits10.1126/science.290.5499.2123 ↗
6. Fabrication of bulk heterojunction plastic solar cells by screen printing10.1063/1.1413501 ↗
7. Performance analysis of printed bulk heterojunctions solar cells10.1002/adfm.200500581 ↗
8. High photovoltaic performance of inkjet printed polymer: fullerene blends10.1002/adma.200700911 ↗
9. Novel method for polymer thin film preparation: spray deposition of highly diluted polymer solutions10.1143/JJAP.41.L70 ↗
10. Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells10.1016/j.tsf.2008.10.124 ↗
11. Spray-deposited poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) top electrode for organic solar cells10.1063/1.3021022 ↗
12. Inspection of substrate-heated modified PEDOT:PSS morphology for all spray deposited organic photovoltaics10.1016/j.solmat.2010.03.013 ↗
13. Fully spray-coated ITO-free organic solar cells for low-cost power generation10.1016/j.solmat.2010.01.003 ↗
14. Bouncing water drops10.1209/epl/i2000-00547-6 ↗
15. Evaporation of a liquid droplet on a hot plate10.1016/0017-9310(91)90162-8 ↗
16. Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
17. High-conductivity poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) film and its application in polymer optoelectronic devices10.1002/adfm.200400016 ↗
18. The effects of solvents on the morphology and sheet resistance in poly(3,4-ethylenedioxythiophene)–polystyrenesulfonicacid (PEDOT–PSS) films10.1016/S0379-6779(02)01259-6 ↗
19. A morphological model for the solvent-enhanced conductivity of PEDOT:PSS thin films10.1002/adfm.200700796 ↗
20. Performance optimization of polymer solar cells using electrostatically sprayed photoactive layers10.1002/adfm.201000433 ↗
21. Novel film-casting method for high-performance flexible polymer electrodes10.1002/adfm.201000589 ↗
22. Lee · Nature · 2006 · 441 · 6510.1038/nature04705 ↗
23. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
24. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
25. Evolution of nanomorphology and anisotropic conductivity in solvent-modified PEDOT:PSS films for polymeric anodes of polymer solar cells10.1039/b915756e ↗
26. Investigation of the effects of doping and post-deposition treatments on the conductivity, morphology, and work function of poly(3,4-ethylendioxythiophene)/poly(styrene sulfonate) films10.1002/adfm.200400073 ↗
27. An inkjet-printed chemical fuse
28. Electrical characterization of single-walled carbon nanotubes in organic solar cells by Kelvin probe force microscopy
29. Surface potential images of polycrystalline organic semiconductors obtained by Kelvin probe force microscopy10.1007/s00339-008-5035-8 ↗