Microstructure and thermal stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating
Source abstract
Abstract
Abstract Solar selective coatings draw much attention due to its critical role in solar receiver employed in solar heat power generation. Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating exhibits a high absorptance of 0.926–0.945 in solar spectrum range and low emittance of 0.04–0.06 (82 °C) in infrared spectrum range. The microstructure of the solar selective coatings by using Al as metal reflector layer had been analyzed by X-ray photoelectron spectroscopy (XPS), auger electron spectroscopy (AES), atomic force microscopy (AFM) and cross-sectional transmission electron microscopy (XTEM). After long time annealed in air, the coating is observed to lost effectiveness in solar spectrum adsorption. More Ti–N bonds rather than Ti–N–O bonds are observed in Ti0.5Al0.5N layer. The experimental results also indicate that the crystallization of the adsorption layers is not complete. It is believed that oxygen diffused into the Ti–Al–N layer to form Ti–Al–O–N structure, and the destruction of the four-layer structure, lead to the degradation of the coatings after long time (>192 h) annealed in air at high temperature (500 °C). Compared with the thermal stability in air, the coatings are much more stable in vacuum under high temperature, which makes it is more appropriate to be used in vacuum.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
2. Applications of thin graded-index films to solar absorbers10.1364/AO.16.001438 ↗
3. C.E. Kennedy, H. Price, Progress in Development of High-Temperature Solar-Selective Coating, NREL, USA, 2005.10.1115/ISEC2005-76039 ↗
4. Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications10.1016/j.solmat.2007.11.004 ↗
5. Structural and optical properties of titanium aluminum nitride films10.1116/1.1359532 ↗
6. Optimization design of Ti0.5Al0.5N/Ti0.25Al0.75N/AlN coating used for solar selective applications10.1016/j.solmat.2011.01.006 ↗
7. Deposition and characterization of TiAlN/TiAlON/Si3N4 tandem absorbers prepared using reactive direct current magnetron sputtering10.1016/j.tsf.2007.10.113 ↗
8. Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers10.1016/j.solmat.2010.04.073 ↗
9. Structure and optical properties of Ag–Al2O3 nanocermet solar selective coatings prepared using unbalanced magnetron sputtering10.1016/j.solmat.2011.01.034 ↗
10. Characterization and temperature controlling property of TiAlN coatings deposited by reactive magnetron co-sputtering10.1016/j.jallcom.2008.04.083 ↗
11. Characterization of nitride coatings by XPS10.1016/S0257-8972(01)01619-X ↗
12. Preparation of aluminum oxide films by ion beam assisted deposition10.1016/S0257-8972(00)00823-9 ↗
13. Structural and optical properties of titanium aluminum nitride films10.1116/1.1359532 ↗
14. Electrical transport, optical properties, and structure of TiN films synthesized by low-energy ion assisted deposition10.1063/1.341468 ↗
15. The ternary system titanium-aluminum-nitrogen10.1016/0022-4596(84)90100-2 ↗
16. Deposition of Ti–Al–N coatings by thermal CVD10.1016/j.ijrmhm.2008.01.003 ↗
17. Optical properties and thermal stability of pulsed-sputter-deposited AlxOy/Al/AlxOy multilayer absorber coatings10.1016/j.solmat.2008.11.005 ↗
18. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
19. Microstructure and mechanical properties of (Al, Ti)(O, N) coatings prepared by reactive sputtering10.1016/j.ijrmhm.2006.07.003 ↗
20. C.E. Kennedy, Review of Mid- to High-Temperature Solar Selective Absorber Materials, NREL, USA, 2002.10.2172/15000706 ↗