Investigation of the Ca(NO3)2–NaNO3 mixture for latent heat storage
Source abstract
Abstract
Abstract In this paper, calcium nitrate and sodium nitrate are mixed in different molar ratios to form a cheap phase change material. The result shows that these binary mixtures all have exothermic peaks at around 220 °C, and the observed enthalpy increases with the NaNO 3 ratio. Further study indicates that although Ca(NO 3 ) 2 and NaNO 3 are mixed in different proportions, the mixture always first melts in the eutectic composition. Different Ca(NO 3 ) 2 and NaNO 3 ratio will lead to different amount of eutectic production, thereby resulting in different observed enthalpy. The sample with Ca(NO 3 ) 2 and NaNO 3 molar ratio of 3:7 shows the best heat storage performance. Specific heat capacity, compatibility and thermal conductivity are also measured in the paper. The cost of the 3:7 mixture is only about half of solar salt, but they have a similar latent heat storage capacity. Overall, this mixture shows a good application advantage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Impact of the heat transfer fluid in a flat plate phase change thermal storage unit for concentrated solar tower plants10.1016/j.solener.2013.12.030 ↗
2. Advanced thermal storage fluids for solar parabolic trough systems10.1115/1.1531644 ↗
3. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications10.1016/S1359-4311(02)00192-8 ↗
4. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
5. High-temperature phase change material for thermal energy storage10.1016/j.rser.2009.11.011 ↗
6. Selection of materials for high temperature latent heat energy storage10.1016/j.solmat.2012.07.020 ↗
7. Recent progress and prospective of medium and high temperatures thermal energy storage materials
8. Advances in medium temperature phase change materials used for thermal energy storage
9. Thermal energy storage technologies and systems for concentrating solar power plants10.1016/j.pecs.2013.02.001 ↗
10. The preparation and properties of multi-component molten salts10.1016/j.apenergy.2009.06.022 ↗
11. Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems10.1016/j.solmat.2011.07.029 ↗
12. J.E. Pacheco, R. Gilbert, Overview of recent results of the solar two test and evaluation program, renewable and advanced energy system for the 21st century, in: Proceedings of the 1999 ASME International Solar Energy Conference, Maui, HI, April 1999, pp. 11–14.
13. Study of the KNO3–LiNO3 and KNO3–NaNO3–LiNO3 eutectics as phase change materials for thermal storage in a low temperature solar power plant10.1016/j.solener.2013.06.008 ↗
14. Investigation of nitrate salts for solar latent heat storage10.1016/0038-092X(80)90357-6 ↗
15. T. Bauer, D. Laing, U. Kroner, R. Tamme, Sodium nitrate for high temperature latent heat storage, in: Proceedings of the 11th International Conference on Thermal Energy Storage – Effstock, Stockholm, Sweden, Proceedings on CD-ROM/4.pdf. 2009.
16. Thermal analytical model of latent thermal storage with heat pipe heat exchanger for concentrated solar power10.1016/j.solener.2013.11.008 ↗
17. Thermal and mechanical properties of nitrate thermal storage salts in the solid-phase10.1016/j.solener.2012.03.011 ↗
18. Binary system Ca(NO3)2–NaNO3
19. Thermodynamic study of the condensed phases of NaNO3, KNO3 and CsNO3 and their transitions10.1016/0040-6031(95)02337-2 ↗
20. Experimental study on optimized composition of mixed carbonate for phase change thermal storage in solar thermal power plant10.1007/s10973-011-1364-5 ↗
21. Experimental study on optimized composition of mixed carbonate salt for sensible heat storage in solar thermal power plant10.1016/j.solener.2011.05.004 ↗
22. Lane · 1983
23. Corrosion of stainless steels and carbon steel by molten mixture of commercial nitrate salts10.1361/10599490417542 ↗
24. Corrosion of metal and metal alloy containers in contact with phase change materials (PCM) for potential heating and cooling applications10.1016/j.apenergy.2014.03.022 ↗
25. Law for viscosity10.1038/164799b0 ↗
26. G.J. Janz, C.B. Allen, N.P. Bansal, R.M. Murphy, R.P.T. Tomins, Physical properties data compilations relevant to energy storage. II. Molten salts: Data on single and multi-component salt systems, 1979, p. 145.10.6028/NBS.NSRDS.61p2 ↗
27. Thermal conductivity of liquids10.1103/PhysRev.59.212 ↗
28. Equivalent volumes of mixtures of molten alkali and alkaline earth nitrates10.1098/rspa.1966.0002 ↗
29. Research progress in application of molten nitrate salt in energy utilization