Novel low melting point binary nitrates for thermal energy storage applications
Source abstract
Abstract
Abstract 19 kinds of different ratio of binary mixed molten salt have been formulated, and the formulation of a low melting point binary molten salt has been exploited and its primary thermophysical properties were presented here. The eutectic temperature of the selected binary salt mixture was determined to be 116.9 ℃. Further the decomposition point, specific heat, density, viscosity, thermal conductivity and corrosion were determined respectively. Sensible thermal storage cost of the novel eutectic mixture was found to be lower than that of conventional solar salt and HITEC salt. The performance of the binary salt mixture taken at different stages during the test of 1200-h exposure to constant high temperature was discussed based on the results obtained from long-term thermal stability studies. The results show that thermodynamic properties of the molten salt show perfect repeatability before and after the experiments, and most variations rate of the thermal physical properties is within±10%, which can be considered as an implication that the candidate has good thermal stability. Therefore, this new kind of binary molten salt thermal storage materials is more competitive and promising to be used in solar power generation systems while providing a comprehensive data for its engineering application and theoretical research.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Miracle or mirage? The promise and peril of desert energy part 1[J]10.1016/j.renene.2012.07.027 ↗
2. Numerical study of parabolic-trough direct steam generation loop in recirculation mode: characteristics, performance and general operation strategy[J]10.1016/j.enconman.2015.02.080 ↗
3. A review on global solar energy policy[J]10.1016/j.rser.2011.01.007 ↗
4. IEA. Technology Roadmap: concentrating Solar Power; 2010. 〈https://www.iea.org/publications/freepublications/publication/csp_roadmap.pdf〉.
5. Concentrating solar power: a review of the technology[J]
6. NREL: Concentrating Solar Power Projects-Gemasolar Thermosoalr Plant[EB/OL]. 〈http://w ww.nrel.gov/csp/solarpaces/project_detail.cfm/projectID=40〉.
7. Heat transfer characteristics of a molten-salt thermal energy storage unit with and withoutheat transfer enhancement[J]10.1016/j.apenergy.2014.10.004 ↗
8. High-temperature phase change materials for thermal energy storage[J]10.1016/j.rser.2009.11.011 ↗
9. State of the art on high temperature thermal energy storage for power generation[J]10.1016/j.rser.2009.07.035 ↗
10. Computational studies on a latent thermal energy storage system with integral heat pipes for concentrating solar power[J]10.1016/j.apenergy.2012.09.056 ↗
11. Assessment of a molten heat transfer fluid in a parabolic trough solar field[J]10.1115/1.1565087 ↗
12. L.L.C. Coastal Chemical Co. HITEC Heat Transfer Salt[M]. Brenntag Company, 5300 Memorial Drive, Suite 250, Houston, 1–10.
13. Importance of accurate data on viscosity and thermal conductivity in molten salts applications [J]
14. Investigation of the Ca(NO3)2–NaNO3 mixture for latent heat storage[J]10.1016/j.solmat.2015.04.005 ↗
15. J.G. Yu, X.F. Song, H.Q Pan. Molten Salt Mixture for LiNO3-KNO3-NaNO3-NaNO2 and Its Preparation, East China University of Science and Technology, China, CN1263924A.[P], 2000.
16. Novel low melting point quaternary eutectic system for solar thermal energy storage[J]10.1016/j.apenergy.2012.09.001 ↗
17. R.W Bradshaw, N.P. Siegel, Molten nitrate salt development for thermal energy storage in parabolic trough solar power systems[R], in: Proceedings of ES2008 Energy Sustainability 2008, Jacksonville, Florida USA, 2008, 55–67.10.1115/ES2008-54174 ↗
18. Multicomponent molten salt mixtures based on nitrate/nitrite anions[J]10.1115/1.4003418 ↗
19. Preparation and thermal properties of quaternary mixed nitrate with low melting point[J]10.1016/j.solmat.2014.03.056 ↗
20. N. Siegel, R. Bradshaw, J. Cordaro, A. Kruizenga, Thermophysical property measurement of nitrate salt heat transfer fluids, in: ASME Proceedings of the 5th international conference on energy sustainability, p. 1–8. ES2011-54058, 2011.10.1115/ES2011-54058 ↗
21. A.B. Zavoico, Solar Power Tower Design Basis Document[R], Sandia Natioanal Laboratories.SAND2001-2100. 2001: 13-19.10.2172/786629 ↗
22. L.L.C. Coastal Chemical Co. HITEC Heat transfer salt[M]. Brenntag Company, 5300 Memorial Drive, Suite250, Houston:1-10.
23. Application of high temperature molten salt to solar thermal power
24. Mixture, law for viscosity10.1038/164799b0 ↗
25. Thermal conductivity of liquids10.1103/PhysRev.59.212 ↗
26. Equivalent volumes of mixtures of molten alkali and alkaline earth nitrates[J]10.1098/rspa.1966.0002 ↗
27. Experimental determination of the thermal conductivity of molten pure salts and salt mixtures[J]10.1007/BF00500266 ↗