Effects of the optical microcavity on the performance of ITO-free polymer solar cells with WO3/Ag/WO3 transparent electrode
Source abstract
Abstract
Abstract We fabricate ITO-free bulk-heterojunction polymer solar cells (PSCs) with the structure glass/WO3/Ag/WO3/P3HT:PCBM/LiF/Al. According to the J–V characterization, the device efficiency is improved by 27.4% for the ITO-free device with a 70 nm-thick active layer but reduced by 19.9% for the device with a 150 nm-thick active layer, when compared with that of the PSC device with an ITO transparent electrode. Further investigation based on IPCE spectra test and transfer matrix simulations reveals that it is the optical resonance effect of the metal-mirror-microcavity (MMC) constructed between the semitransparent Ag electrode and top Al electrode that leads to the efficiency improvement for the device with 70 nm-thick active layer. Meanwhile, the efficiency reduction of the device with a 150 nm-thick active layer is caused by the off-resonance suppression of the MMC structure. It demonstrates that the MMC structure is an important element to be considered when the WO3/Ag/WO3 multilayer is used to substitute the ITO electrode as a transparent electrode of the PSC devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Organic solar cells: an overview10.1557/JMR.2004.0252 ↗
2. Polymer-based solar cells10.1016/S1369-7021(07)70276-6 ↗
3. Improving optical performance of inverted organic solar cells by microcavity effect10.1063/1.3262967 ↗
4. Enhancement of the short circuit current in organic photovoltaic devices with microcavity structures
5. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
6. Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing10.1016/j.solmat.2011.09.048 ↗
7. ITO-free inverted polymer solar cells using a GZO cathode modified by ZnO10.1016/j.solmat.2011.01.011 ↗
8. ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating10.1016/j.solmat.2010.11.025 ↗
9. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
10. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
11. Using light-induced thermocleavage in a roll-to-roll process for polymer solar cells10.1021/am900858x ↗
12. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
13. Electrode grids for ITO free organic photovoltaic devices10.1002/adma.200602561 ↗
14. Polymer photovoltaic devices with transparent graphene electrodes produced by spin-casting10.1016/j.carbon.2010.05.017 ↗
15. Semitransparent inverted polymer solar cells using MoO3/Ag/WO3 as highly transparent anodes10.1016/j.solmat.2010.11.009 ↗
16. Tailoring spatial distribution of the optical field intensity in semitransparent inverted organic solar cells10.1021/jp201890q ↗
17. Optical optimization of polyfluorene–fullerene blend photodiodes10.1063/1.1836005 ↗
18. Effects of metal electrode reflection and layer thicknesses on the performance of inverted organic solar cells10.1016/j.solmat.2009.12.017 ↗
19. Organic photovoltaic cell in lateral-tandem configuration employing continuously-tuned microcavity sub-cells10.1364/OE.16.019987 ↗