Mechanical integrity of flexible InZnO/Ag/InZnO multilayer electrodes grown by continuous roll-to-roll sputtering
Source abstract
Abstract
Abstract The mechanical integrity of a flexible ZnO-doped In 2 O 3 (IZO)/Ag/IZO multilayer electrode deposited onto a flexible PET substrate using a continuous roll-to-roll (R2R) sputtering system was investigated by means of outer/inner bending, twisting and stretching tests. The R2R-sputtered flexible IZO (40 nm)/Ag (12 nm)/IZO (40 nm) electrode with a sheet resistance of 5.37 Ω/sq and an optical transmittance of 87.3% exhibited superior flexibility due to existence of a ductile Ag layer with high strain failure. It was noteworthy that the failure bending radius (5.5 mm) of the inner bending test was lower than that (6.5 mm) of the outer bending test due to complete separation of the cracks on the top IZO layer during the outer bending test. In addition, the twisting test showed that the resistance of the flexible IZO/Ag/IZO electrode began to increase at an angle of 26°. Furthermore the stretching test demonstrated that the strain failure of the IZO/Ag/IZO multilayer was 2.4%, which is higher than those of conventional flexible ITO electrodes. The mechanical integrity of the R2R-sputtered IZO/Ag/IZO multilayer indicated that hybridization of an oxide and Ag metal is a promising flexible electrode scheme for next generation flexible organic solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Wong · 2009
2. Crawford · 2005
3. Pagliaro · 2008
4. Characteristics of flexible indium tin oxide electrode grown by continuous roll-to-roll sputtering process for flexible organic solar cells10.1016/j.solmat.2009.01.015 ↗
5. A roll-ro-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
6. Flexible indium zinc oxide/Ag/indium oxide multilayer electrode grown on polyethersulfone substrate by cost-efficient roll-to-roll sputtering for flexible organic photovoltaics10.1116/1.3264464 ↗
7. Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays10.1016/j.tsf.2004.01.052 ↗
8. Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates10.1063/1.126052 ↗
9. Carbon nanotube network electrodes enabling efficient organic solar cells without a hole transport layer10.1063/1.3453445 ↗
10. Optical anisotropy in single-walled carbon nanotube thin films: implications for transparent and conducting electrodes in organic photovoltaics10.1021/nl080563p ↗
11. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
12. Large area, continuous, few-layered graphene as anodes in organic photovoltaic devices10.1063/1.3204698 ↗
13. Organic solar cells with solution-processed graphene transparent electrodes10.1063/1.2924771 ↗
14. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
15. Andersen · Transparent anodes for polymer photovoltaics: Oxygen permeability of PEDOT, Sol. Energy Mater. Sol. Cells · 2004 · 91 · 53910.1016/j.solmat.2006.11.006 ↗
16. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
17. Low resistance and highly transparent ITO–Ag–ITO multilayer electrode using surface plasmon resonance of Ag layer for bulk-heterojunction organic solar cells10.1016/j.solmat.2009.06.014 ↗
18. Room temperature flexible and transparent ITO/Ag/ITO electrode grown on flexible PES substrate by continuous roll-to-roll sputtering for flexible organic photovoltaics10.1088/0022-3727/42/23/235109 ↗
19. Comparison of electrical, optical, structural, and interface properties of IZO–Ag–IZO and IZO–Au–IZO multilayer electrodes for organic photovoltaics10.1063/1.3294605 ↗
20. Highly flexible and transparent InZnSnOx/Ag/InZnSnOx multilayer electrode for flexible organic light emitting diodes10.1063/1.2937845 ↗
21. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
22. Thin Ag layer inserted GZO multilayer grown by roll-to-roll sputtering for flexible and transparent conducting electrodes10.1149/1.3454125 ↗
23. The effect of rapid thermal annealing on the electrical, optical, and structural properties of Nb:TiO2 multilayer electrodes with an inserted nanaoscale Ag layer for organic solar cells10.1063/1.3499282 ↗
24. Choi · Nano-Size Ag-Inserted Amorphous ZnSnO3 Multilayer Electrodes for Cost-Efficient Inverted Organic Solar Cells · 2011 · 95 · 1615
25. Highly flexible, transparent, and low resistance indium zinc oxide–Ag–indium zinc oxide multilayer anode on polyethylene terephthalate substrate for flexible organic light-emitting diodes10.1016/j.tsf.2008.06.025 ↗
26. Interfacial and mechanical studies of a composite Ag–IZO–PEN barrier film for effective encapsulation of organic TFT10.1016/j.orgel.2009.11.028 ↗
27. Theoretical and experimental studies of bending of inorganic electronic materials on plastic substrates10.1002/adfm.200800306 ↗
28. Transparent heat‐mirror films of TiO2/Ag/TiO2 for solar energy collection and radiation insulation10.1063/1.1655364 ↗
29. Tin doped indium oxide thin films: electrical properties10.1063/1.367025 ↗
30. Durability of nanosized oxygen-barrier coating on polymer10.1016/S0079-6425(02)00002-6 ↗
31. Highly flexible transparent electrodes for organic light emitting diodes based displays10.1063/1.1806559 ↗
32. Dry and wet sliding wear of ITO-coated PET components used in flexible optoelectronic applications10.1016/j.wear.2008.12.042 ↗