Spatially resolved photocurrent measurements of organic solar cells: Tracking water ingress at edges and pinholes
Source abstract
Abstract
Abstract Many degradation mechanisms in organic solar cells are underpinned by the ingress of water at certain points. We demonstrate the use of a photocurrent mapping technique to examine the diffusive ingress of water at the edges of a cell and at pinholes in the cathode layer. A diffusion model applied to the experimental results leads to a value of (5.0±2.7)×10−6 cm2 s−1 for the diffusivity of water in the poly(3,4-ethylenedioxythiophene):poly(styrene sulphonate) layer. The existence of this layer increases the rate of cell degradation by a factor of ten. The literature is inconclusive with respect to which entry pathway for water is the most important. We find that (a) water ingress clearly occurs at pinholes and at the device edges, rather than uniformly through the cathode film; (b) that ingress at pinholes has the same time dependence as ingress at the edges, however the absolute rate depends on the size of the pinhole; and (c) that degradation at the device edges is faster than even at larger pinholes, except where the cathode layer extends beyond the boundary of the active cell. It follows that the lateral architecture of the cell can significantly impact the degradation of efficiency in the device, and we quantify this effect. We demonstrate that the photocurrent mapping method does not require complete local annihilation of device performance in order to track the ingress of water, which means that the method may also be valuable for the study of water ingress through encapsulants in commercial or near-commercial devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
2. Stability of polymer solar cells10.1002/adma.201104187 ↗
3. Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices10.1016/j.solmat.2008.01.020 ↗
4. Lifetimes of organic photovoltaics: combining chemical and physical characterisation techniques to study degradation mechanisms10.1016/j.solmat.2006.04.009 ↗
5. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
6. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
7. Water and oxygen induced degradation of small molecule organic solar cells10.1016/j.solmat.2011.01.001 ↗
8. Water-induced degradation of polymer solar cells studied by H2(18)O labeling10.1021/am800039w ↗
9. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
10. Analysis of the failure mechanism for a stable organic photovoltaic during 10000h of testing10.1002/pip.794 ↗
11. Luminescence imaging of polymer solar cells: visualization of progressing degradation10.1063/1.3553864 ↗
12. The effect of barrier performance on the lifetime of small-molecule organic solar cells10.1016/j.solmat.2011.09.026 ↗
13. Patterns of efficiency and degradation of composite polymer solar cells10.1016/j.solmat.2004.02.028 ↗
14. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration10.1039/c2ee03508a ↗
15. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
16. Spatially resolved photocurrent mapping of operating organic photovoltaic devices using atomic force photovoltaic microscopy10.1063/1.2830695 ↗
17. Mapping local photocurrents in polymer/fullerene solar cells with photoconductive atomic force microscopy10.1021/nl062989e ↗
18. Direct photocurrent mapping of organic solar cells using a near-field scanning optical microscope10.1021/nl0349496 ↗
19. Breitenstein · 2003
20. Fast LBIC in-line characterization for process quality control in the photovoltaic industry10.1016/S0927-0248(01)00189-1 ↗
21. Printed metal back electrodes for R2R fabricated polymer solar cells studied using the LBIC technique10.1016/j.solmat.2010.11.007 ↗
22. Current collecting grids for ITO-free solar cells10.1002/aenm.201100552 ↗
23. Accurate efficiency determination and stability studies of conjugated polymer/fullerene solar cells10.1016/S0040-6090(01)01589-9 ↗
24. The OE-A OPV demonstrator anno domini 201110.1039/c1ee01891d ↗
25. Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules10.1016/j.solmat.2011.09.064 ↗
26. Microscopic theory for the diffusive evolution of an isoconcentration surface10.1103/PhysRevA.42.3504 ↗
27. The general aspects of diffusion of water in polymers10.1080/00914039408028565 ↗
28. Diffusion of water vapor in polymers10.1002/pol.1955.120158009 ↗
29. The role of water in the electrodeposition and doping of polythiophene and two of its derivatives10.1002/macp.1993.021941008 ↗
30. International equations for the saturation properties of ordinary water substance. Revised according to the international temperature scale of 1990.10.1063/1.555926 ↗
31. Modification of silver anode and cathode for a top-illuminated organic photovoltaic device10.1088/0022-3727/43/39/395101 ↗
32. 4.8% efficient poly(3-hexylthiophene)-fullerene derivative (1:0.8) bulk heterojunction photovoltaic devices with plasma treated AgO[sub x]/indium tin oxide anode modification10.1063/1.2830619 ↗
33. Electrical and optical properties of reactive DC magnetron sputtered silver oxide thin films: role of oxygen10.1016/S0040-6090(03)00064-6 ↗