journal article·2013-07

Thermal aging characteristics of CrN O solar selective absorber coating for flat plate solar thermal collector applications

Liang Wu, Junhua Gao, Zhimin Liu, Lingyan Liang, Fei Xia, Hongtao Cao

Publisher page

Abstract

Abstract A solar selective absorber coating of CrN x O y /SiO 2 was prepared on Cu (Si) substrate using DC reactive magnetron sputtering technique. The coating exhibits a high absorptivity ( α ) of 0.947 and a low emissivity ( e ) of 0.05 at 80 °C. The spectral selectivity ( α / e ) of the coating on Cu substrate is stable (0.930/0.073) even after heat-treatment at 278 °C in air for 300 h, but decreased (0.904/0.135) at 278 °C for 600 h. The determinants to govern the thermal stability were investigated by micro-Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) measurements, which reveal that the element diffusion whether throughout all the stacked layers or near the interface region, the chemical interactions adjacent to the interface, and the interface width broadening are the Achilles' heel for the solar thermal coatings to sustain high thermal stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · Heat Transfer Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
2. C.E. Kennedy, Review of Mid and High Temperature Solar Selective Absorber Materials, Technical Report, NREL/TP-520-31267, National Renewable Energy Laboratory of USA, July 2002.10.2172/15000706 ↗
3. Review of materials for solar thermal collectors10.1108/00035590510603210 ↗
4. The spectral properties and thermal stability of NbTiON solar selective absorbing coating10.1016/j.solmat.2011.09.034 ↗
5. Deposition and characterization of TiAlN/TiAlON/Si3N4 tandem absorbers prepared using reactive direct current magnetron sputtering10.1016/j.tsf.2007.10.113 ↗
6. Performance and stability of some new high temperature selective absorber systems based on metal/dielectric multilayers10.1016/0927-0248(94)90001-9 ↗
7. Selective black absorbers using rf-sputtered Cr2O3/Cr cermet films10.1063/1.89234 ↗
8. Chromium-based thin sputtered composite coatings for solar thermal collectors10.1016/S0042-207X(01)00372-4 ↗
9. Structure and optical properties of pulsed sputter deposited CrxOy/Cr/Cr2O3 solar selective coatings10.1063/1.2831364 ↗
10. Optical and electronic properties of CrOxNy films, deposited by reactive DC magnetron sputtering in Ar/N2/O2(N2O) atmospheres10.1016/j.surfcoat.2005.02.181 ↗
11. Spectrally selective CrMoN/CrON tandem absorber for mid-temperature solar thermal applications10.1016/j.solmat.2012.10.003 ↗
12. Advanced procedure for the assessment of the lifetime of solar absorber coatings10.1016/j.solmat.2004.01.041 ↗
13. Accelerated life testing of solar absorber coatings: testing procedure and results10.1016/S0038-092X(00)00034-7 ↗
14. Accelerated aging tests of chromium containing amorphous hydrogenated carbon coatings for solar collectors10.1016/S0927-0248(98)00088-9 ↗
15. Qualification test procedure for solar absorber surface durability10.1016/S0927-0248(99)00111-7 ↗
16. Round robin on accelerated life testing of solar absorber surface durability10.1016/S0927-0248(99)00113-0 ↗
17. Sputtered Cr and reactively sputtered CrNx serving as barrier layers against copper diffusion10.1149/1.1838953 ↗
18. Raman spectroscopy and x-ray diffraction of phase transitions in Cr2O3 to 61GPa10.1103/PhysRevB.69.144107 ↗
20. Chemical reaction of sputtered Cu film with PI modified by low energy reactive atomic beam10.1016/j.apsusc.2005.08.019 ↗
21. Enhanced inter-diffusion of Cu into rf-sputtered chromium-oxide films10.1116/1.570796 ↗
22. XPS and AES studies of the Cr/Al2O3 interface10.1002/1521-396X(199702)159:2<425::AID-PSSA425>3.0.CO;2-W ↗