journal article·2010-10

Effect of cathode buffer layer on the stability of polymer bulk heterojunction solar cells

Liying Yang, Hao Xu, Hui Tian, Shougen Yin, Fengling Zhang

Publisher page

Abstract

The effect of cathode buffer layer on the stability of polymer solar cells with cesium carbonate (Cs2CO3) as the cathode buffer layer was investigated. Compared with traditional devices using lithium fluoride (LiF) as buffer layer, the use of the Cs2CO3 layer has enhanced not only open-circuit voltages and power conversion efficiencies of the polymer solar cells due to better contact with the cathode but also the device stability. From results of stability test, we concluded that the inserted Cs2CO3 buffer layer is working as a better shielding and scavenging protector which prevents the intruding of oxygen and humidity into the active layer, thereby improving the lifetime of unpackaged devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
2. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
3. Photoinduced absorption spectroscopy on MDMO–PPV:PCBM solar cells under operation10.1016/j.orgel.2006.12.002 ↗
4. Organic solar cells using transparent SnO2-F anodes10.1002/adma.200600797 ↗
5. Modified buffer layers for polymer photovoltaic devices10.1063/1.2437703 ↗
6. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
7. Enhancing the photovoltage of polymer solar cells by using a modified cathode10.1002/adma.200602597 ↗
8. Performance improvement of polymer solar cells by using a solution processible titanium chelate as cathode buffer layer10.1063/1.2757125 ↗
9. 〈http://www.forbes.com/feeds/businesswire/2009/10/22/businesswire130523884.html〉
10. Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices10.1016/j.solmat.2008.01.020 ↗
11. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
12. Analysis of the failure mechanism for a stable organic photovoltaic during 10,000h of testing10.1002/pip.794 ↗
13. Conjugated polymer surfaces and interfaces: a mini-review and some new results10.1016/S0379-6779(96)03692-2 ↗
14. Accelerated lifetime measurements of P3HT:PCBM solar cells10.1016/j.synthmet.2005.06.016 ↗
15. High performance polythiophene/fullerene bulk-heterojunction solar cell with a TiOx hole blocking layer10.1063/1.2730746 ↗
16. Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy10.1016/j.solmat.2006.10.020 ↗
17. Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
18. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
19. Bulk heterojunctions based on native polythiophene10.1021/cm800431s ↗
20. A simple nanostructured polymer/ZnO hybrid solar cell—preparation and operation in air10.1088/0957-4484/19/42/424013 ↗
21. Air-stable polymer electronic devices10.1002/adma.200602653 ↗
22. Cesium carbonate as a functional interlayer for polymer photovoltaic devices10.1063/1.2937202 ↗
23. 4.2% efficient organic photovoltaic cells with low series resistances10.1063/1.1713036 ↗
24. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
25. Elucidation of the electron injection mechanism of evaporated cesium carbonate cathode interlayer for organic light-emitting diodes
26. Low-work-function surface formed by solution-processed and thermally deposited nanoscale layers of cesium carbonate10.1002/adfm.200700051 ↗