Characterization of medium-temperature phase change materials for solar thermal energy storage using temperature history method
Source abstract
Abstract
Abstract In this work, thermal properties of five phase change materials (PCMs) with medium phase change temperature including mannitol, sebacic acid (SA), SA/expanded graphite (EG) composite, LiNO3-KCl eutectic salt and LiNO3-KCl/EG composite, were characterized using temperature history (T-history) method with improved accuracy. The studies on mannitol showed that although the T-history method could yield a supercooling degree which was lower than that from differential scanning calorimetry (DSC) determination, the severe supercooling and great latent heat loss during mannitol's solidification were still the problems which hindered the use of this material. As for the rest materials, slight or no supercooling phenomena were observed and the obtained phase change temperatures were well matched to literature data. The latent heat measurements of these four materials proved a proportional relationship between the PCM/EG composite's latent heat and PCM's mass fraction. However, the latent heat values determined by T-history were higher than the DSC results. Therefore, repeated studies were still required to further evaluate the latent heat storage densities of these materials. The results in this work could play key roles in design, simulation and modification of latent thermal energy storage (LTES) systems based on these medium-temperature PCMs for solar heat applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Passive thermal control in residential buildings using phase change materials10.1016/j.rser.2015.10.128 ↗
2. Solar cooker with latent heat storage systems: a review10.1016/j.rser.2008.09.020 ↗
3. State of the art on high temperature thermal energy storage for power generation. Part 1—concepts, materials and modellization10.1016/j.rser.2009.07.035 ↗
4. Thermal energy storage technologies and systems for concentrating solar power plants10.1016/j.pecs.2013.02.001 ↗
5. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications10.1016/S1359-4311(02)00192-8 ↗
6. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
7. Solar energy storage using phase change materials10.1016/j.rser.2006.05.005 ↗
8. A review of solar collectors and thermal energy storage in solar thermal applications10.1016/j.apenergy.2012.11.051 ↗
9. Enthalpy of phase change materials as a function of temperature: required accuracy and suitable measurement methods10.1007/s10765-009-0641-z ↗
10. Measurement of enthalpy curves of phase change materials via DSC and T-History: when are both methods needed to estimate the behaviour of the bulk material in applications?10.1016/j.tca.2014.09.022 ↗
11. A review of the composite phase change materials: Fabrication, characterization, mathematical modeling and application to performance enhancement10.1016/j.apenergy.2015.12.043 ↗
12. Review of the T-history method to determine thermophysical properties of phase change materials (PCM)10.1016/j.rser.2013.05.066 ↗
13. A simple method, the T -history method, of determining the heat of fusion, specific heat and thermal conductivity of phase-change materials10.1088/0957-0233/10/3/015 ↗
14. Determination of enthalpy–temperature curves of phase change materials with the temperature-history method: improvement to temperature dependent properties10.1088/0957-0233/14/2/305 ↗
15. Accuracy improvement of T-history method for measuring heat of fusion of various materials10.1016/j.ijrefrig.2003.12.006 ↗
16. Characterization of granular phase changing composites for thermal energy storage using the T-history method10.1002/er.1560 ↗
17. Improved measurement technique for the characterization of organic and inorganic phase change materials using the T-history method10.1016/j.apenergy.2013.01.079 ↗
18. Characterization of phase change materials for thermal control of photovoltaics using differential scanning calorimetry and temperature history method10.1016/j.enconman.2014.02.042 ↗
19. Polyols as phase change materials for low-grade excess heat storage10.1016/j.egypro.2014.11.938 ↗
20. Polyols as phase change materials for surplus thermal energy storage10.1016/j.apenergy.2015.03.064 ↗
21. Thermal energy storage for low and medium temperature applications using phase change materials – a review10.1016/j.apenergy.2016.05.097 ↗
22. Thermal characterisation of binary sodium/lithium nitrate salts for latent heat storage at medium temperatures10.1016/j.solmat.2016.08.017 ↗
23. A novel sebacic acid/expanded graphite composite phase change material for solar thermal medium-temperature applications10.1016/j.solener.2013.11.018 ↗
24. Thermal property measurement and heat storage analysis of LiNO3/KCl – expanded graphite composite phase change material10.1016/j.apenergy.2013.11.019 ↗
25. Thermal analysis of D-mannitol for use as phase change material for latent heat storage10.3923/jas.2011.3044.3048 ↗
26. Thermophysical and heat transfer properties of phase change material candidate for waste heat transportation system10.1007/s00231-007-0311-2 ↗
27. A study of erythritol as phase change material
28. Thermal stability test of sugar alcohols as phase change materials for medium temperature energy storage application10.1016/j.egypro.2014.02.051 ↗
29. Characterization of different sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.solmat.2016.10.009 ↗
30. Graphite nanoplates loading into eutectic mixture of Adipic acid and Sebacic acid as phase change material10.1016/j.solmat.2015.05.003 ↗
31. Thermal behaviour of dicarboxylic acids. Determination of melting points by DTA10.1016/0040-6031(92)87017-5 ↗
32. Thermal analysis of phase change materials in the temperature range 120–150 °C10.1016/j.tca.2010.11.011 ↗
33. Heat-accumulating properties of melts, Russian
34. Investigations on the thermal stability, long-term reliability of LiNO3/KCl – expanded graphite composite as industrial waste heat storage material and its corrosion properties with metals10.1016/j.apenergy.2016.12.010 ↗
35. Heat transfer enhancement of neopentyl glycol using compressed expanded natural graphite for thermal energy storage10.1016/j.renene.2012.09.029 ↗
36. Preparation and thermal property analysis of Wood's alloy/expanded graphite composite as highly conductive form-stable phase change material for electronic thermal management10.1016/j.applthermaleng.2017.04.154 ↗