journal article·2017-09

CdTe thin film solar cell with NiO as a back contact buffer layer

Di Xiao, Xun Li, Dongming Wang, Qiang Li, Kai Shen, Deliang Wang

Publisher page

Abstract

Abstract In this work, p-type NiO thin film was applied as a buffer layer in the back contact for CdTe thin film solar cell fabrication. The NiO layers were prepared by electron beam evaporation. By optimizing NiO layer thickness in the back contact a CdTe solar cell with an efficiency of 12.17% and an open-circuit voltage V oc of 790 mV has been fabricated. X-ray photoelectron spectroscopy study showed that NiO has a staggered band alignment with CdTe. Such an electronic band structure alignment allows smooth hole transport from CdTe to NiO and at the same time NiO acts as a surface field layer to reduce electron recombination at the back contact interface, thus leading to improved V oc . This study also demonstrates that by employing NiO as a buffer layer, much less Cu was needed for the CdTe solar cell fabrication and the cell device stability had been significantly enhanced compared to the CdTe solar cell with a conventional Cu/Au bimetal layer as the back contact.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Thin-film CdS/CdTe solar cell with 15.8% efficiency10.1063/1.109629 ↗
2. High-efficiency polycrystalline CdTe thin-film solar cells10.1016/j.solener.2004.06.006 ↗
3. Hign efficiency CSS CdTe solar cells10.1016/S0040-6090(99)00824-X ↗
4. Thin film CdTe solar cells with an absorber layer thickness in micro- and sub-micrometer scale10.1063/1.3644160 ↗
5. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
6. Solar cell efficiency tables (Version 45) Prog10.1002/pip.2573 ↗
7. Effect of back-contact barrier on thin-film CdTe solar cells10.1016/j.tsf.2006.01.004 ↗
8. Effects of the Au/CdTe back contact on IV and CV characteristics of Au/CdTe/CdS/TCO solar cells10.1063/1.363946 ↗
9. Copper inclusion and migration from the back contact in CdTe solar cells
10. Photoluminescence of Cu-doped CdTe and related stability issues in CdS/CdTe solar cells10.1063/1.1287414 ↗
11. Stability of CdTe/CdS thin-film solar cells10.1016/S0927-0248(00)00014-3 ↗
12. Application of copper thiocyanate for high open-circuit voltages of CdTe solar cells10.1002/pip.2660 ↗
13. Wiring-up carbon single wall nanotubes to polycrystalline inorganic semiconductor thin films: low-barrier, copper-free back contact to CdTe solar cells10.1021/nl402659c ↗
14. Copper (I) Oxide (Cu2O) based back contact for p-i-n CdTe solar cells10.1002/pip.2782 ↗
15. Sputtered CdS/CdTe solar cells with MoO3−x/Au back contacts10.1016/j.solmat.2013.01.041 ↗
16. Stable CdTe thin film solar cells with a MoOx back contact buffer layer10.1002/pip.2645 ↗
17. MoOx back contact for CdS/CdTe thin film solar cells: preparation, device characteristics, and stability10.1016/j.solmat.2012.01.001 ↗
18. Stable CdTe solar cell with V2O5 as a back contact buffer layer10.1016/j.solmat.2015.09.036 ↗
19. CdS/CdTe thin-film solar cells with Cu-free transition metal oxide/Au back contacts10.1002/pip.2446 ↗
20. A low-temperature, solution-processable,Cu-doped Nickel Oxide hole-transporting layer via the combustion method for high-performance thin-film perovskite solar cells10.1002/adma.201503298 ↗
21. High incident photo-to-current conversion efficiency of p-type dye-sensitized solar cells based on NiO and organic chromophores10.1002/adma.200802461 ↗
22. Solution-processed Nickel Oxide hole transport layers in high efficiency polymer photovoltaic cells10.1002/adfm.201202269 ↗
23. Nickel oxide hole ingection/transport layers for efficiency solution-processed organic light-emitting diodes10.1021/cm501898y ↗
24. Effient electrochromic nickel oxide thin films by electrodeposition10.1016/j.jallcom.2009.09.146 ↗
25. Magnetic transition-state approach to antiferromagnetic ordering: NiO10.1103/PhysRevLett.44.1633 ↗
26. High-performance and environmentally stable plannar heterojunction perovskite solar cells based on a solution-processed copper-doped nickel oxide hole-transporting layer10.1002/adma.201404189 ↗
27. The effects of high temperature processing on the structural and optical properties of oxygenated CdS window layers in CdTe solar cells10.1063/1.4891235 ↗
28. Grain-boundary-enhanced carrier collection in CdTe solar cells10.1103/PhysRevLett.112.156103 ↗
29. Structural, optical and dispersion energy parameters of nickel oxide nanocrystalline thin films prepared by electron beam deposition technique10.1016/j.jallcom.2015.05.217 ↗
30. Structural, optoelectronic and electrochemical properties of nickel oxide films10.1007/s10854-008-9819-6 ↗
31. Self-powered p-NiO/ZnO heterojunction ultraviolet photodetectors fabricated on plastic substrates10.1063/1.4932194 ↗
32. Influence of substrate temperature on electrical and optical properties of p-type semitransparent conductive nickel oxide thin films deposited by radio frequency sputtering10.1016/j.apsusc.2007.09.051 ↗
33. Highly efficient flexible perovskite solar cells using solution-derived NiOx hole contacts10.1021/acsnano.5b08135 ↗
34. Effect of NiOx thin layer fabricated by oxygen-plasma treatment on polymer photovoltaic cell10.1016/j.solmat.2010.04.077 ↗
35. Effect of heat treatment on the properties of non-stoimetric p-type nickel oxide films deposited by reactive sputtering10.1016/j.tsf.2005.04.061 ↗
36. Tunable electrical properties of NiO thin films and p-type thin-film transistors10.1016/j.tsf.2015.09.025 ↗
37. Measurement of AlN/GaN (0001) heterojunction band offsets by x-ray photoemission spectroscopy10.1063/1.116355 ↗
38. Valence band offset of InN/AlN heterojunctions measured by x-ray photoelectron spectroscopy10.1063/1.2716994 ↗
39. A comparative study of BSF layers for GaAs-based single-junction or multijunction concentrator solar cells10.1088/0268-1242/21/10/003 ↗
40. Projections of GaAs solar -cell Performance limits based on two-dimensional numerical simulation10.1109/16.299671 ↗
41. 14%-efficient flexible CdTe solar cells on ultra-thin glass substrates10.1063/1.4870834 ↗
42. The roles of ZnTe buffer layers on CdTe solar cell performance10.1016/j.solmat.2015.12.019 ↗
43. Controlled activation of ZnTe: Cu contacted CdTe solar cells using rapid thermal processing10.1016/j.solmat.2014.10.045 ↗
44. Development of Cu-doped ZnTe as back-contact interface layer for thin-film CdS/CdTe solar cells10.1116/1.580394 ↗
45. The formation of ZnTe: Cu and CuxTe double layer back contacts for CdTe solar cells10.1016/j.cap.2010.02.037 ↗
46. Prospects of back surface field effect in ultra-thin high-efficiency CdS/CdTe solar cells form numerical modeling
47. Efficiency enchancement of inverted structure perovskite solar cells via oleamide doping of PCBM electron transport layer10.1021/acsami.5b03525 ↗
48. An inorganic conductor for organo-lead halide perovskite solar cells, improved hole conductivity with copper iodide10.1021/ja411014k ↗
49. Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells10.1039/C3TA13606J ↗
50. Role of the selective contacts in the performance of lead halide perovskite solar cells10.1021/jz500059v ↗