CdS and Zn1−xSnxOy buffer layers for CIGS solar cells
Source abstract
Abstract
Des cellules solaires à film mince à base de Cu(In,Ga)Se2 (CIGS), où seule la couche tampon est modifiée, ont été fabriquées et étudiées. Les effets de deux couches tampons différentes, CdS et ZnxSn1 −xOy (ZnSnO), sont comparés en utilisant plusieurs techniques de caractérisation. Nous avons comparé les deux dispositifs et observé que les cellules solaires à base de ZnSnO ont des valeurs similaires d'efficacité de conversion d'énergie par rapport aux cellules avec des couches tampons CdS. Les dispositifs à base de ZnSnO ont des valeurs plus élevées dans le courant de court-circuit (Jsc) qui compensent des valeurs plus faibles dans le facteur de remplissage (FF) et la tension en circuit ouvert (Voc) que les dispositifs à base de CdS. Les résultats de la microscopie à force de sonde de Kelvin (KPFM) indiquent que le CdS fournit des jonctions avec une photovoltaïque de surface (SPV) légèrement plus élevée que le ZnSnO, expliquant ainsi le potentiel Voc plus faible pour l'échantillon de ZnSnO. L'analyse met montre une couche de ZnSnO poly-cristallin et nous n'avons détecté aucune preuve forte de diffusion de Zn ou Sn dans le CIGS. À partir des mesures de photoluminescence, nous avons conclu que les deux échantillons sont affectés par des potentiels fluctuants, bien que cet effet soit plus élevé pour l'échantillon CdS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. R. Kamada, T. Yagioka, S. Adachi, A. Handa, K. Fai Tai, T. Kato, H. Sugimoto, New world record Cu(In,Ga)(Se,S)2 thin film solar cell efficiency beyond 22%, in: 43rd IEEE Photovoltaic Specialists Conference, # 355, 2016. (available at: 〈http://www.pvsc-proceedings.org/〉).10.1109/PVSC.2016.7749822 ↗
2. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
3. Cu(In,Ga)Se2 thin-film solar cells and modules— a boost in efficiency due to potassium10.1109/JPHOTOV.2014.2377516 ↗
4. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
5. Improved photocurrent in Cu(In,Ga)Se2 solar cells: from 20.8% to 21.7% efficiency with CdS buffer and 21.0% Cd-free10.1109/JPHOTOV.2015.2458039 ↗
6. The effect of Zn1−xSnxOy buffer layer thickness in 18.0% efficient Cd-free Cu(In,Ga)Se2 solar cells10.1002/pip.2239 ↗
7. Potential gain in photocurrent generation for Cu(In,Ga)Se2 solar cells by using In2O3 as a transparent conductive oxide layer
8. In-line Cu(In,Ga)Se2 co-evaporation for high efficiency solar cells and modules10.1109/JPHOTOV.2013.2256232 ↗
9. Incorporation of Na in Cu(In,Ga)Se2 thin film solar cells: a statistical comparison between Na from soda lime glass and from a precursor layer of NaF10.1109/JPHOTOV.2014.2357261 ↗
10. The effect of Mo back contact ageing on CIGS thin film solar cells10.1002/pip.2360 ↗
11. A comparison between thin film solar cells made from co-evaporated CuIn1−xGaxSe2 using a one-stage process versus a three-stage process10.1002/pip.2453 ↗
12. Cu(In,Ga)Se2 solar cells with varying Na content prepared on nominally alkali-free glass substrates10.1109/JPHOTOV.2013.2247655 ↗
13. Long lifetimes in high-efficiency Cu(In,Ga)Se2 solar cells10.1063/1.2957983 ↗
14. Recombination kinetics and stability in polycrystalline Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2008.11.050 ↗
15. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
16. High-quality sample preparation by low kV FIB thinning for analytical TEM measurements10.1017/S1431927607070018 ↗
17. Surface potential of chalcopyrite films measured by KPFM10.1002/pssa.200669573 ↗
18. The effect of high growth temperature on Cu(In,Ga)Se2 thin film solar cells10.1016/j.solmat.2014.01.006 ↗
19. Chemical fluctuation-induced nanodomains in C(In,Ga)Se2 films10.1063/1.2053349 ↗
20. Effects of solution-grown CdS on Cu(In,Ga)Se2 grain boundaries10.1063/1.3512966 ↗
21. Cadmium ion soaking treatment for solution processed CunInSxSe2−x solar cells and its effects on defect properties10.1016/j.solmat.2011.04.010 ↗
22. Cu depletion at the CuInSe2 surface10.1063/1.1570516 ↗
23. Direct evidence of Cd diffusion into Cu(In,Ga)Se2 thin films during chemical-bath deposition process of CdS films10.1063/1.123875 ↗
24. Direct evidence of a buried homojunction in Cu(In,Ga)Se2 solar cells10.1063/1.1534417 ↗
25. Soft X-ray characterization of Zn1−xSnxOy electronic structure for thin film photovoltaics10.1039/c2cp41394a ↗
26. The effect of substrate temperature on atomic layer deposited zinc tin oxide10.1016/j.tsf.2015.04.029 ↗
27. Growth kinetics, properties, performance, and stability of atomic layer deposition Zn–Sn–O buffer layers for Cu(In,Ga)Se2 solar cells10.1002/pip.1153 ↗
28. Interpretation of admittance, capacitance-voltage, and current-voltage signatures in Cu(In,Ga)Se2 thin film solar cells10.1063/1.3277043 ↗
29. Charge and doping distributions by capacitance profiling in Cu(In,Ga)Se2 solar cells10.1063/1.2884708 ↗
30. Bulk and metastable defects in CuIn1−xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
31. Admittance spectroscopy of CulnSe,/CdS solar cells prepared by chemical spray pyrolysis10.1063/1.350824 ↗
32. Frequency dependent capacitance studies of the CdS/Cu2S thin-film solar cell10.1063/1.331127 ↗
33. Levanyuk · Edge luminescence of direct-gap semiconductors, Sov. Phys. Usp. · 1981 · 24 · 187
34. Dirnstorfer · Postgrowth thermal treatment of CuIn(Ga)Se2 Characterization of doping levels in In-rich thin films, J. Appl. Phys. · 1999 · 85 · 1423
35. Bauknecht · Radiative recombination via intrinsic defects in CuxGaySe2, J. Appl. Phys. · 2001 · 89 · 4391
36. Leitão · Photoluminescence and electrical study of fluctuating potentials in Cu2ZnSnS4-based thin films, Phys. Rev. B · 2011 · 84 · 024120
37. Comparative study of the luminescence and intrinsic point defects in the kesterite Cu2ZnSnS4 and chalcopyrite Cu(In,Ga)Se2 thin films used in photovoltaic applications10.1103/PhysRevB.84.165324 ↗
38. Excitation dependent emission in Mg, Be, Cd, and Zn implanted GaAs10.1063/1.323631 ↗
39. Radiative recombination in melt grown and Cd implanted CuInSe210.1063/1.322633 ↗
40. Comparison of fluctuating potentials and DAP transitions in a Cu-poor Cu2ZnSnS4 based solar cell10.1063/1.4899057 ↗
41. Radiative transitions in highly doped and compensated chalcopyrites and kesterites: the case of Cu2ZnSnS410.1103/PhysRevB.90.235202 ↗
42. Revisiting the interpretation of biased luminescence: effects on Cu(In,Ga)Se2 photovoltaic heterostructures10.1063/1.4891525 ↗
43. Towards an electronic model for CuIn1−xGaxSe2 solar cells10.1016/j.tsf.2011.01.092 ↗
44. Deposition temperature induced conduction band changes in zinc tin oxide buffer layers for Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2015.09.048 ↗
45. Surface treatment of Cu(In,Ga)Se2 thin films and its effect on the photovoltaic properties of solar cells10.1016/S0022-3697(03)00169-0 ↗
46. Radiative efficiency limits of solar cells with lateral bandgap fluctuations10.1063/1.1737071 ↗
47. What limits the efficiency of chalcopyrite solar cells?10.1016/j.solmat.2010.12.014 ↗
48. Band tailing and efficiency limitation in kesterite solar cells10.1063/1.4820250 ↗
49. Experimental indication for band gap widening of chalcopyrite solar cell absorbers after potassium fluoride treatment10.1063/1.4892882 ↗
50. A comparative study of Cd- and Zn-compound buffer layers on Cu(In1−x,Gax)(Sy,Se1−y)2 thin film solar cells
51. Sputtered ZnO-based buffer layer for band offset control in Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2010.12.117 ↗
52. R. Scheer, H. Wilhelm, Efficiency limitations of chalcopyrite and kesterite solar cells, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 2011, pp. 002500–002505.10.1109/PVSC.2011.6186454 ↗
53. Achievement of 17.9% efficiency in 30×30cm2 Cu(In,Ga)(Se,S)2 solar cell sub-module by sulfurization after selenization with Cd-free buffer
54. Understanding the light soaking effect of ZnMgO buffer in CIGS solar cells10.1039/C5CP01758K ↗
55. Anomalous temperature dependence of the open-circuit voltage of InxSy-buffered Cu(In,Ga)(Se,S)2 solar cells simulated in broad temperature range
56. Improved open-circuit voltage in Cu(In,Ga)Se2 solar cells with high work function transparent electrodes10.1063/1.4922351 ↗
57. Impact of oxygen concentration during the deposition of window layers on lowering the metastability effects in Cu(In,Ga)Se2/CBD Zn(S,O) based solar cell10.1002/pip.2626 ↗
58. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
59. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
60. Efficiency enhancement of Cu(In,Ga)Se2 thin-film solar cells by a post-deposition treatment with potassium fluoride10.1002/pssr.201307238 ↗
61. Development of rear surface passivated Cu(In,Ga)Se2, thin film solar cells with nano-sized local rear point contacts10.1016/j.solmat.2013.07.025 ↗
62. Introduction of Si PERC rear contacting design to boost efficiency of Cu(In,Ga)Se2 solar cells10.1109/JPHOTOV.2014.2350696 ↗
63. Reducing interface recombination for Cu(In,Ga)Se2 by atomic layer deposited buffer layers10.1063/1.4927096 ↗
64. Suppression of surface recombination in CuInSe2 (CIS) thin films via Trioctylphosphine Sulfide (TOP:S) surface passivation10.1016/j.actamat.2016.01.021 ↗