Enhanced efficiency in organic solar cells via in situ fabricated p-type copper sulfide as the hole transporting layer
Source abstract
Abstract
Abstract In this article, we in situ fabricated copper sulfide (CuS) on fluorinated tin oxide (FTO) substrate using a low temperature and low cost hydrothermal method and then organic solar cells (OSCs) were fabricated by using a thin layer of CuS film as hole transporting layer (HTL). Our CuS films, consisting of two-dimensional (2D) intersected hexagonal nanosheets, are stoichiometric and show p-type electrical conductivity, a good transparency and a high hole mobility. The Fermi level, valence and conduction band energies for CuS HTL are characterized in detail through photoelectron spectroscopy studies. The small energy barrier between the valance band of CuS and the HOMO of poly(3-hexylthiophene) (P3HT) and the high hole mobility and electrical conductivity of CuS nanosheet film benefit for the hole transporting. Therefore, CuS HTL to OSCs results in a power conversion efficiency of 3.4% with P3HT and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as the active layer, which is a 13.3% increase in performance than devices with a poly (3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) HTL. Therefore, low-cost, environmental friendly and stable CuS is an appropriate choice for hole transporting materials (HTMs) in OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
2. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
3. Efficient, air-stable bulk heterojunction polymer solar cells using moox as the anode interfacial layer10.1002/adma.201100038 ↗
4. Recent progress in organic-inorganic hybrid solar cells10.1039/c3ta11200d ↗
5. Graphene cathode-based ZnO nanowire hybrid solar cells10.1021/nl303920b ↗
6. Studies of the optimization of recombination layers for inverted tandem polymer solar cells10.1016/j.solmat.2012.08.004 ↗
7. Semi-transparent organic inverted photovoltaic cells with solution processed top electrode10.1016/j.solmat.2012.09.002 ↗
8. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
9. Freely available OPV – the fast way to progress10.1002/ente.201300057 ↗
10. Technological status of organic photovoltaics (OPV)10.1016/j.solmat.2013.08.044 ↗
11. Efficiency improvement in organic solar cells by inserting a discotic liquid crystal10.1016/j.solmat.2011.03.024 ↗
12. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
13. Enhancing the performance of P3HT:ICBA based polymer solar cells using LiF as electron collecting buffer layer and UV–ozone treated MoO3 as hole collecting buffer layer10.1016/j.solmat.2012.12.006 ↗
14. MoO3/CuI hybrid buffer layer for the optimization of organic solar cells based on a donor–acceptor triphenylamine10.1016/j.solmat.2012.12.003 ↗
15. Efficient flexible organic solar cells with room temperature sputtered and highly conductive NiO as hole-transporting layer10.1088/0022-3727/43/44/445101 ↗
16. Organic solar cells with p-type amorphous chromium oxide thin film as hole-transporting layer10.1016/j.tsf.2011.02.013 ↗
17. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
18. Solution-processed vanadium oxide as an anode interlayer for inverted polymer solar cells hybridized with ZnO nanorods10.1016/j.orgel.2009.05.017 ↗
19. Metal sulfide nanostructures: synthesis, properties and applications in energy conversion and storage10.1039/C1JM13879K ↗
20. Routes to nanostructured inorganic materials with potential for solar energy applications10.1021/cm401366q ↗
21. Copper sulphide (CuxS) as an ammonia gas sensor working at room temperature10.1016/j.snb.2008.02.015 ↗
22. Direct growth of high-rate capability and high capacity copper sulfide nanowire array cathodes for lithium-ion batteries10.1039/c0jm00434k ↗
23. Schoonman, atomic layer deposition of cuxs for solar energy conversion10.1002/cvde.200290001 ↗
24. Synthesis, characterization, shape evolution, and optical properties of copper sulfide hexagonal bifrustum nanocrystals10.1007/s11051-013-1469-9 ↗
25. Copper sulfide as a light absorber in wet-chemical synthesized extremely thin absorber (ETA) solar cells10.1039/B813740D ↗
26. Copper sulfide films obtained by spray pyrolysis for dyes photodegradation under visible light irradiation10.1016/j.jphotochem.2012.11.011 ↗
27. A microwave assisted heating method for the preparation of copper sulfide nanorods10.1016/S0022-0248(03)01030-3 ↗
28. One-step synthesis and assembly of copper sulfide nanoparticles to nanowires, nanotubes, and nanovesicles by a simple organic amine-assisted hydrothermal process10.1021/nl025551x ↗
29. Chemical deposition method for metal chalcogenide thin films10.1016/S0254-0584(00)00217-0 ↗
30. Synthesis of octahedral CuS nanocages via a solid–liquid reaction10.1088/0957-4484/17/15/005 ↗
31. The structure of amorphous copper sulfide precipitates: an X-ray absorption study10.1016/S0016-7037(97)00061-6 ↗
32. A general method for the large-scale synthesis of uniform ultrathin metal sulphide nanocrystals10.1038/ncomms2181 ↗
33. Electronic and crystal structure of Cu2−xS: full-potential electronic structure calculations10.1103/PhysRevB.76.195202 ↗
34. Plasmonic Cu2−xS nanocrystals: optical and structural properties of copper-deficient copper(I) sulfides10.1021/ja805655b ↗
35. Electrochemical considerations for determining absolute frontier orbital energy levels of conjugated polymers for solar cell applications10.1002/adma.201004554 ↗
36. Enhancement of the carrier mobility of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) by incorporating reduced graphene oxide10.1063/1.4740073 ↗