journal article·2020-03Open access

Fluoropolymer coatings for solar cover glass: Anti-soiling mechanisms in the presence of dew

Illya Nayshevsky, Qian Feng Xu, Gil Barahman, Alan M. Lyons

Abstract

Abstract Soiling of solar cover glass can cause a significant loss of electrical output from PV panels. Dew condensed on the surface exacerbates soiling rates and promotes reactions between dust and glass leading to stronger adhesive forces that make cleaning more expensive. To reduce soiling rates and lower cleaning costs, anti-soiling coatings are being developed. Although the interactions between dust particles and uncoated low-iron glass surfaces are known, the mechanisms by which anti-soiling coatings reduce soiling rates are less well understood. In this paper we report on the effect of wetting properties on both the soiling rate as well as the cleaning efficiency of polymer coated solar cover glass substrates in the presence of condensed water in a controlled environment. Coatings were fabricated with water contact angles (CAs) ranging from 149° to 51° and compared to bare glass. Arizona Test Dust was applied onto substrates on which water condensate (i.e. artificial dew) had formed. The surfaces were baked to enable cementation to occur. Such dew-dust-dry cycles were repeated to simulate naturally occurring, cumulative soiling processes. Changes in dust accumulation rates were assessed as a function of coating properties. Hydrophobic coated glass exhibited 42% lower soiling rates compared to hydrophilic glass. A dust “herding” mechanism was identified to account for these reduced soiling rates, by which dust is concentrated into discrete piles during the lateral shrinkage of droplets on low-energy surfaces. These hydrophobic surfaces were also easier to clean with >99% of the original direct transmittance restored using only water.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Photovoltaic Systems and Sustainability · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Cano · 2011
2. Direct monitoring of energy lost due to soiling on first solar modules in California10.1109/JPHOTOV.2012.2216859 ↗
3. Soiling losses for solar photovoltaic systems in California10.1016/j.solener.2013.06.028 ↗
4. A comprehensive review of the impact of dust on the use of solar energy: history, investigations, results, literature, and mitigation approaches10.1016/j.rser.2012.12.065 ↗
5. Energy yield loss caused by dust deposition on photovoltaic panels10.1016/j.solener.2014.05.030 ↗
6. Soiling and self-cleaning of PV modules under the weather conditions of two locations in Arizona and South-East India
7. Time evolution of PV soiling loss at test locations in different climates
8. Fundamentals of soiling processes on photovoltaic modules10.1016/j.rser.2018.09.015 ↗
9. Dust effect on flat surfaces - a review paper10.1016/j.rser.2014.02.016 ↗
10. Effect of airborne dust concentration on the performance of PV modules
11. Mitigation of soiling losses in concentrating solar collectors
12. Microstructural analysis of the cementation process during soiling on glass surfaces in arid and semi-arid climates10.1002/pssr.201600152 ↗
13. Dew as a detrimental influencing factor for soiling of PV modules
14. Fundamental studies of adhesion of dust to PV module surfaces: chemical and physical relationships at the microscale10.1109/JPHOTOV.2016.2528409 ↗
15. Evaluation of the adhesion forces between dust particles and photovoltaic module surfaces10.1016/j.solmat.2018.11.031 ↗
16. Adhesion mechanisms on solar glass: effects of relative humidity, surface roughness, and particle shape and size10.1016/j.solmat.2017.07.026 ↗
17. Optimized cleaning cost and schedule based on observed soiling conditions for photovoltaic plants in Central Saudi Arabia10.1109/JPHOTOV.2016.2535308 ↗
18. Self-cleaning transparent dust shields for protecting solar panels and other devices10.1080/02726350601146341 ↗
19. Ashes to ashes, dust to dust: averting a potential showstopper for solar photovoltaics
20. Fu · 2018
21. Fabrication of transparent superhydrophobic porous silica coating for self-cleaning and anti-fogging10.1016/j.ceramint.2016.02.105 ↗
22. Development of durable self-cleaning coatings using organic-inorganic hybrid sol-gel method10.1016/j.apsusc.2015.03.105 ↗
23. Mechanically durable, superhydrophobic coatings prepared by dual-layer method for anti-corrosion and self-cleaning10.1016/j.colsurfa.2015.11.049 ↗
24. Preparation of hydrophobic and abrasion-resistant silica antireflective coatings by using a cationic surfactant to regulate surface morphologies10.1016/j.solener.2013.12.038 ↗
25. Anti-reflective and anti-soiling properties of KleanBoostTM, a superhydrophobic nano-textured coating for solar glass
26. Hydrophobic-Hydrophilic Surfaces Exhibiting Dropwise Condensation for Anti-Soiling Applications10.1109/JPHOTOV.2018.2882636 ↗
27. Durable, optically transparent, superhydrophobic polymer films10.1016/j.apsusc.2018.11.113 ↗
28. Soiling measurement station to evaluate anti-soiling properties of PV module coatings
29. Anti-soiling surfaces for PV applications prepared by sol-gel processing: comparison of laboratory testing and outdoor exposure10.1016/j.solmat.2016.07.004 ↗
30. Fundamental Characterization of Anti-Soiling Coatings for PV Glass: Application of Small-Angle X-ray Scattering
31. Improved self-cleaning properties of an efficient and easy to scale up TiO 2 thin films prepared by adsorptive self-assembly10.1038/s41598-017-07826-0 ↗
32. Theoretical and experimental characterization of efficient anti-dust coatings under desert conditions10.30799/jtfr.013.18020101 ↗
33. TiO2 photocatalysis: design and applications10.1016/j.jphotochemrev.2012.06.001 ↗
34. Light-induced amphiphilic surfaces
35. TiO2 thin films prepared via adsorptive self-assembly for self-cleaning applications10.1021/am201721e ↗
36. Retention of liquid drops by solid surfaces10.1016/0021-9797(90)90225-D ↗
37. Highly durable anti-reflective anti-soiling coating for PV module glass
38. V. Nair, B. Brophy, Anti-Reflective and Anti-Soiling Coatings with Self-Cleaning Properties. US patent 9,461,185 B2, 2016 Oct 6.
39. Wind tunnel protocol to study the effects of anti-soiling and anti-reflective coatings on deposition, removal, and accumulation of dust on photovoltaic surfaces and consequences for optical transmittance10.1016/j.solener.2018.01.088 ↗
40. Laboratory soiling test for evaluation of anti-soiling coating performance
41. 3M · 2013 · 6
42. A.M. Lyons, Q.F. Xu, Center-side method of producing superhydrophobic surface. US patent 9,987,818, 2018 Jun 5.
43. A.M. Lyons, Q.F. Xu, Center-side method of producing superhydrophobic surface. China patent CN 106103076 B, 2018 Aug 10.
44. 2016
45. Miller · 2013
46. Correlating photovoltaic soiling losses to waveband and single-value transmittance measurements10.1016/j.energy.2019.05.097 ↗
47. 2017
48. Dust-induced shading on photovoltaic modules10.1002/pip.2230 ↗
49. The effect of dust with different morphologies on the performance degradation of photovoltaic modules
50. Nayshevsky · 2019
51. Review of vapor condensation heat and mass transfer in the presence of non-condensable gas10.1016/j.applthermaleng.2015.06.040 ↗
52. Wetting 101°10.1021/la902206c ↗
53. Non-sticking drops10.1088/0034-4885/68/11/R01 ↗
54. Outdoor soiling microscope for measuring particle deposition and resuspension10.1016/j.solener.2016.08.015 ↗
55. Design and fabrication of a hybrid superhydrophobic-hydrophilic surface that exhibits stable dropwise condensation10.1021/acsami.5b06759 ↗
56. White · 1988 · 602
57. Assessment of water droplet evaporation mechanisms on hydrophobic and superhydrophobic substrates10.1021/la4045286 ↗
58. Indoor experiments of dust deposition reduction on solar cell covering glass by transparent super-hydrophobic coating with different tilt angles10.1016/j.solener.2019.07.026 ↗
59. Lyons, Self-cleaning hybrid hydrophobic-hydrophilic surfaces: durability and effect of artificial soilant particle type