21.3%-efficient n-type silicon solar cell with a full area rear TiOx/LiF/Al electron-selective contact
Source abstract
Abstract
Abstract In this work, we investigate an efficient electron-selective passivating contact with TiOx/LiF/Al contact structure, which offers both low surface recombination and specific contact resistance. Optimized TiOx layer thickness of 4 nm provides high quality surface passivation, achieving minority carrier lifetime of 3.03 ms on 5 Ω cm n-type wafers, with a saturated current density J0 of 23 fA/cm2. In addition, inserting a 1 nm LiF between the 4 nm TiOx and Al reduces the contact resistivity to 18 mΩ cm2. The low contact resistivity of TiOx/LiF/Al contact is attributed to barrier reduction from the low work function of LiF/Al stack. A champion solar cell efficiency of 21.3% has been achieved for an n-type crystalline silicon device with a full-area rear TiOx/LiF/Al contact, demonstrating the excellent potential of this passivating contact for fabricating high-efficiency silicon solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. A magnesium/amorphous silicon passivating contact for n-type crystalline silicon solar cells10.1063/1.4962960 ↗
2. D. MacDonald, The emergence of n-type silicon for solar cell manufacture. In 50th Annual AuSES Conference (Solar 2012), Melbourne, Australia.
3. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
4. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
5. 22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collector10.1063/1.4928747 ↗
6. Industrially feasible, dopant‐free, carrier‐selective contacts for high‐efficiency silicon solar cells10.1002/pip.2901 ↗
7. Silicon heterojunction solar cells with electron selective TiOx contact10.1016/j.solmat.2016.01.020 ↗
8. A low resistance calcium/reduced titania passivated contact for high efficiency crystalline silicon solar cells10.1002/aenm.201602606 ↗
9. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
10. Stable dopant-free asymmetric heterocontact silicon solar cells with efficiencies above 20%10.1021/acsenergylett.7b01279 ↗
11. Dopant‐free partial rear contacts enabling 23% silicon solar cells10.1002/aenm.201803367 ↗
12. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
13. Low-temperature synthesis of a TiO2/Si heterojunction10.1021/jacs.5b09750 ↗
14. TiO2 films from the low‐temperature oxidation of Ti as passivating‐contact layers for Si heterojunction solar cells10.1002/solr.201700154 ↗
15. Ion‐assisted deposition of mixed TiO2‐SiO2 films10.1063/1.344352 ↗
16. Surface passivation of c-Si by atomic layer deposition TiO2 thin films deposited at low temperature
17. Excellent c-Si surface passivation by low-temperature atomic layer deposited titanium oxide10.1063/1.4885096 ↗