journal article·2018-11

Electrochemical study on the corrosion behaviors of 316 SS in HITEC molten salt at different temperatures

Ming Zhu, Song Zeng, Huihui Zhang, Junyi Li, Boyuan Cao

Publisher page

Abstract

Abstract Corrosion of 316 SS in HITEC molten salt was investigated at 450 °C, 600 °C, and 680 °C by electrochemical methods including potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements. Corrosion products were investigated by XRD and SEM equipped with EDS. Corrosion of 316 SS in HITEC molten salt exhibited active corrosion characteristics at these temperatures. 316 SS exhibited resistance to corrosion in HITEC molten salt at 450 °C, suffered severe corrosion at 680 °C, and demonstrated discontinuously increasing corrosion rate from 600 °C to 680 °C. A thin layer of Cr2O3 and Fe-based oxides formed at 450 °C. At 600 °C and 680 °C three distinct oxide layers could be distinguished with a loose outer Fe-based oxide layer. After corrosion at 600 °C and 680 °C for 200 h, Na2O and K2O were detected in the HITEC molten salts, which caused the decomposition of the protective Cr2O3 layer and enhanced corrosion of 316 SS. EIS results show that the corrosion processes of 316 SS in molten salt at 450 °C and 600 °C are controlled by outward diffusion of metal ions and oxygen vacancies, while corrosion mechanism at 680 °C change to was inward diffusion of oxygen ions. The change in corrosion mechanism became more prominent when corrosion time was prolonged to 197 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Molten salt chemistry and electrochemical processes · Metallurgical Processes and Thermodynamics · Phase Change Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Corrosion properties of a ternary nitrate/nitrite molten salt in concentrated solar technology10.1016/j.renene.2015.01.072 ↗
2. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
3. Historical development of concentrating solar power technologies to generate clean electricity efficiently – a review10.1016/j.rser.2014.09.008 ↗
4. Review on system and materials requirements for high temperature thermal energy storage. Part 1: general requirements10.1016/j.rser.2016.11.119 ↗
5. Design of new molten salt thermal energy storage material for solar thermal power plant10.1016/j.apenergy.2012.10.048 ↗
6. Molten nitrate salts at 600 and 680°C: thermophysical property changes and corrosion of high-temperature nickel alloys10.1016/j.solener.2014.01.028 ↗
7. Corrosion of iron stainless steels in molten nitrate salt10.1016/j.egypro.2014.03.095 ↗
8. Corrosion effects between molten salts and thermal storage material for concentrated solar power plants10.1016/j.apenergy.2011.12.057 ↗
9. Improvement of the corrosion properties in ternary molten nitrate salts for direct energy storage in CSP plants10.1016/j.solener.2016.05.030 ↗
10. Corrosion of stainless steels and low-Cr steel in molten Ca(NO3)2–NaNO3–KNO3 eutectic salt for direct energy storage in CSP plants10.1016/j.solmat.2015.05.004 ↗
11. Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600°C10.1016/j.solmat.2015.08.011 ↗
12. High-temperature corrosion of Cr–Mo steel in molten LiNO3–NaNO3–KNO3 eutectic salt for thermal energy storage10.1016/j.solmat.2014.10.007 ↗
13. Thermal influence in corrosion properties of Chilean solar nitrates10.1016/j.solener.2014.07.027 ↗
14. The thermal stability of molten nitrite/nitrates salt for solar thermal energy storage in different atmospheres10.1016/j.solener.2012.05.025 ↗
15. Evaluation of corrosion resistance of aluminium coating with and without annealing against molten carbonate using electrochemical impedance spectroscopy10.1016/j.jpowsour.2014.03.076 ↗
16. Corrosion evaluation of alloys and MCrAlX coatings in molten carbonates for thermal solar applications10.1016/j.solmat.2016.07.029 ↗
17. An electrochemical study of the effect of Li on the corrosion behavior of Ni3Al intermetallic alloy in molten (Li+K) carbonate10.1016/j.corsci.2009.04.012 ↗
18. High temperature corrosion and electrochemical behavior of INCONEL 625 weld overlay in PbSO4–Pb3O4–PbCl2–CdO–ZnO molten salt medium10.1016/j.corsci.2014.03.034 ↗
19. Electrochemical study of the corrosion of a Ni-based alloy GH3535 in molten (Li,Na,K)F at 700°C10.1016/j.jfluchem.2015.06.014 ↗
20. Electrochemical impedance models for molten salt corrosion10.1016/S0010-938X(00)00108-6 ↗
21. Hot corrosion of materials: a fluxing mechanism?10.1016/S0010-938X(01)00057-9 ↗