Temperature-dependent contact resistance of carrier selective Poly-Si on oxide junctions
Source abstract
Abstract
Abstract Carrier selective junctions using a poly-silicon/ silicon oxide stack on crystalline silicon feature low recombination currents J0 whilst allowing for low contact resistivity ρ C . We describe the limiting current transport mechanism as a combination of homogeneous tunneling through the interfacial silicon oxide layer and transport through pinholes where the interfacial silicon oxide layer is locally disrupted. We present an experimental method and its theoretical basis to discriminate between homogenous tunneling and local pinhole transport mechanisms on n + /n or p + /p junctions by measuring the temperature-dependent contact resistance. Theory predicts opposing trends for the temperature dependencies of tunneling and pinhole transport. This allows identifying the dominant transport path. For the contact resistance of two differently prepared poly-Si/ silicon oxide/ c-Si junctions we either find clear pinhole-type or clear tunneling-type temperature dependence. Pinhole transport contributes more than 94 % to the total current for the sample with a 2.1 nm-thick interfacial silicon oxide that we anneal at a temperature of 1050 °C to achieve highest selectivity. In contrast pinhole transport contributes less than 35 % to the total current for the sample with a 1.7 nm-thick silicon oxide that we annealed at only 700 °C in order to avoid pinholes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Contact selectivity and efficiency in crystalline silicon photovoltaics10.1109/JPHOTOV.2016.2598267 ↗
2. Junction resistivity of carrier-selective polysilicon on oxide junctions and its impact on solar cell performance10.1109/JPHOTOV.2016.2614123 ↗
3. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
4. Theoretical investigation of carrier-selective contacts featuring tunnel oxides by means of numerical device simulation10.1016/j.egypro.2015.07.027 ↗
5. A simple model describing the symmetric I-V characteristics of p polycrystalline Si/n monocrystalline Si, and n polycrystalline Si/p monocrystalline Si junctions10.1109/JPHOTOV.2014.2310740 ↗
6. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
7. Pinhole density and contact resistivity of carrier selective junctions with polycrystalline silicon on oxide10.1063/1.4986924 ↗
8. D. Tetzlaff, J. Krugener, Y. Larionova, S. Reiter, M. Turcu, R. Peibst, U. Hohne, J.-.D. Kahler, T. Wietler, Evolution of oxide disruptions: The (W)hole story about poly-Si/c-Si passivating contacts, in: Proceeedings of 2016 IEEE 43rd Photovoltaic Specialists Conference, IEEE, 2016, pp. 0221–0224 〈http://dx.doi.org/10.1109/PVSC.2016.7749582〉.10.1109/PVSC.2016.7749582 ↗
9. A simple method for pinhole detection in carrier selective POLO-junctions for high efficiency silicon solar cells10.1016/j.solmat.2017.05.041 ↗
10. Study of pinhole conductivity at passivated carrier-selected contacts of silicon solar cells10.1016/j.egypro.2016.07.040 ↗
11. Charge carrier transport mechanisms of passivating contacts studied by temperature-dependent J-V measurements10.1016/j.solmat.2018.01.008 ↗
12. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
13. Spreading resistance between constant potential surfaces10.1002/j.1538-7305.1971.tb01882.x ↗
14. B. Fischer, Loss analysis of crystalline silicon solar cells using photoconductance and quantum efficiency measurements, Diss. University of Konstanz, 2003.
15. A. Schenk, P. Altermatt, B. Schmithusen, Physical Model of Incomplete Ionization for Silicon Device Simulation, in: Proceedings of 2006 International Conference Simulation of Semiconductor Processes and Devices, IEEE, 2006, pp. 51–54. 〈http://dx.doi.org/10.1109/SISPAD.2006.282836〉.10.1109/SISPAD.2006.282836 ↗
16. A unified mobility model for device simulation—II. Temperature dependence of carrier mobility and lifetime10.1016/0038-1101(92)90326-8 ↗
17. A unified mobility model for device simulation – I. Model equations and concentration dependence10.1016/0038-1101(92)90325-7 ↗
18. Minority carrier MIS tunnel diodes and photo-voltaic energy conversion – II10.1016/0038-1101(74)90173-7 ↗
19. Studies of tunnel MOS diodes I. Interface effects in silicon Schottky diodes10.1088/0022-3727/4/10/319 ↗
20. The SIS tunnel emitter: a theory for emitters with thin interface layers10.1109/T-ED.1979.19684 ↗
21. Characteristics Of Cr-SiO2-nSi Tunnel Diodes10.1016/0038-1101(77)90064-8 ↗
22. Analytical model for metal-insulator-semiconductor (MIS) devices10.1109/16.168723 ↗
23. Sze · 2006
24. Analytical theory for extracting specific contact resistances of thick samples from the transmission line method10.1109/LED.2013.2290602 ↗