journal article·2016-04

Accelerated thermal cycle and chemical stability testing of polyethylene glycol (PEG) 6000 for solar thermal energy storage

R.K. Sharma, P. Ganesan, V.V. Tyagi, T.M.I. Mahlia

Publisher page

Abstract

Abstract Accelerated thermal cycle test of polyethylene glycol (PEG) of molecular weight 6000, an organic phase change material (O-PCM), has been carried out for 1500 melt/freeze cycles. The latent heat of fusion and melting temperature is measured using differential scanning calorimeter between 0th and 1500th melt–freeze cycles to study the changes in its thermal properties. Also, the changes in the compositional/functional groups of the material during the cycle test are also measured using FT-IR spectroscopy technique. The melting temperature is found to be stable in the quoted range of 55–60 °C with a maximum deviation of 6.5% when compared to that of at 0th cycle. However, a gradual drop in the latent heat of fusion with the increasing number of thermal cycles is measured. The FT-IR spectra do not show any noticeable changes in the peaks which confirm its compositional stability even after the higher number of thermal cycles. Thermal and chemical reliability tests of PEG 6000 along with the techno-economic analysis have shown that this PCM has a significant potential to be used as a thermal energy storage system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Thermal energy storage properties and thermal reliability of some fatty acid esters/building material composites as novel form-stable PCMs10.1016/j.solmat.2012.02.026 ↗
2. Thermal cycling test of few selected inorganic and organic phase change materials10.1016/j.renene.2008.02.026 ↗
3. Developments in organic solid–liquid phase change materials and their applications in thermal energy storage10.1016/j.enconman.2015.01.084 ↗
4. Accelerated thermal cycle test of latent heat-storage materials10.1016/S0038-092X(99)00045-6 ↗
5. Salt hydrates used for latent heat storage: corrosion of metals and reliability of thermal performance10.1016/0038-092X(88)90136-3 ↗
6. Thermal cycle testing of calcium chloride hexahydrate as a possible PCM for latent heat storage10.1016/j.solmat.2008.02.021 ↗
7. Review on sustainable thermal energy storage technologies, part I: heat storage materials and techniques10.1016/S0196-8904(98)00025-9 ↗
8. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications10.1016/S1359-4311(02)00192-8 ↗
9. Experimental investigation on the use of water-phase change material storage in conventional solar water heating systems10.1016/j.enconman.2009.08.038 ↗
10. A storage domestic solar hot water system with a back layer of phase change material10.1016/j.expthermflusci.2012.05.017 ↗
11. Thermal performance of an integrated collector storage solar water heater (ICSSWH) with phase change materials (PCM)10.1016/j.enconman.2013.07.089 ↗
12. Mushrooms dehydration in a hybrid-solar dryer, using a phase change material10.1016/j.enconman.2014.03.077 ↗
13. Thermal performance of palmitic acid as a phase change energy storage material10.1016/S0196-8904(01)00071-1 ↗
14. Thermal performance of myristic acid as a phase change material for energy storage application10.1016/S0960-1481(00)00167-1 ↗
15. Thermal energy storage system using stearic acid as a phase change material10.1016/S0038-092X(01)00075-5 ↗
16. Performance investigation of thermal energy storage system with phase change material (PCM) for solar water heating application10.1016/j.icheatmasstransfer.2014.07.022 ↗
17. Experimental investigation on phase change material based thermal storage system for solar air heating applications10.1016/j.solener.2012.11.006 ↗
18. Solar cooker with latent heat storage: Design and experimental testing10.1016/S0196-8904(96)00066-0 ↗
19. Determination of thermal performance of a box type solar cooker10.1016/j.solener.2015.01.014 ↗
20. Study on transition characteristics of PEG/CDA solid–solid phase change materials10.1016/S0032-3861(01)00613-9 ↗
21. Thermal energy storage systems based on poly(vinyl chloride) blends10.1016/S0014-3057(98)00107-4 ↗
22. Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage10.1016/j.solmat.2011.01.022 ↗
23. Phase change materials for thermal energy storage10.1016/j.pmatsci.2014.03.005 ↗
24. Fatty acid ester-based commercial products as potential new phase change materials (PCMs) for thermal energy storage10.1016/j.solmat.2012.08.015 ↗
25. Synthesis, thermal energy storage properties and thermal reliability of some fatty acid esters with glycerol as novel solid–liquid phase change materials10.1016/j.solmat.2010.05.033 ↗
26. Shape-stabilized phase change materials with high thermal conductivity based on paraffin/graphene oxide composite10.1016/j.enconman.2012.11.023 ↗
27. Synthesis, characterization and thermal properties of nanoencapsulated phase change materials via sol–gel method10.1016/j.energy.2013.09.012 ↗
28. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
29. Accelerated thermal cycle test of acetamide, stearic acid and paraffin wax for solar thermal latent heat storage applications10.1016/S0196-8904(01)00131-5 ↗
30. Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applications10.1016/S0196-8904(02)00251-0 ↗