journal article·2012-08

A promising sputtering route for one-step fabrication of chalcopyrite phase Cu(In,Ga)Se2 absorbers without extra Se supply

Chia-Hsiang Chen, Wen-Chieh Shih, Chih-Yu Chien, Chia-Hao Hsu, Yan-Huie Wu, Chih-Huang Lai

Publisher page

Abstract

Abstract One-step fabrication of the chalcopyrite Cu(In,Ga)Se2 (CIGS) absorber layer without excess Se supply during/after deposition or post-selenization treatments is reported. By using pulse DC sputtering from a single quaternary CIGS target, the chalcopyrite structure is spontaneously developed on the substrate at 500 °C even without extra Se supply. The obtained CIGS absorber layer possesses columnar grains with (112) preferred orientation. Device efficiency of 8.22% is observed for slightly Se-deficient CIGS films. By further tuning the target composition, the efficiency is enhanced to 10.14%. We demonstrate that the device-quality CIGS absorber can be formed even in the Se-deficient environment and further improvement of efficiency can be achieved by tuning the Se content of the target. Accordingly, our one-step sputtering process shows great potential for mass production of thin film CIGS solar cells with a low cost and a high throughput.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Development of high efficiency CuInxGa1−xSe2 thin-film solar cells by selenization with elemental Se vapor in vacuum10.1143/JJAP.34.54 ↗
2. Preparation of homogeneous Cu(InGa)Se2 films by selenization of metal precursors in H2Se atmosphere10.1063/1.114424 ↗
3. CIGS absorbers and processes10.1002/pip.969 ↗
4. Non-vacuum methods for formation of Cu(In,Ga)(Se,S)2 thin film photovoltaic absorbers10.1002/pip.914 ↗
5. A high-efficiency solution-deposited thin-film photovoltaic device10.1002/adma.200800555 ↗
6. Development of CuInSe2 nanocrystal and nanoring inks for low-cost solar cells10.1021/nl802042g ↗
7. 19·9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81·2% fill factor10.1002/pip.822 ↗
8. High quality baseline for high efficiency, Cu(In1−x,Gax)Se2 solar cells10.1002/pip.757 ↗
9. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
10. Low cost processing of CIGS thin film solar cells10.1016/j.solener.2004.08.015 ↗
11. Key near-term R&D issues for continuous improvement in CIS-based thin-film PV modules10.1016/j.solmat.2008.11.063 ↗
12. Copper indium disulfide solar cell absorbers prepared in a one-step process by reactive magnetron sputtering from copper and indium targets10.1016/S0040-6090(02)00355-3 ↗
13. Microstructural characterization for sputter-deposited CuInSe2 films and photovoltaic devices10.1143/JJAP.34.4715 ↗
14. Na-induced variations in the structural, optical, and electrical properties of Cu(In,Ga)Se2 thin films10.1063/1.3190528 ↗
15. Na in selenized Cu(In,Ga)Se2 on Na-containing and Na-free glasses: distribution, grain structure, and device performances10.1016/S0040-6090(00)01028-2 ↗