Two components based polyethylene glycol/thermosetting solid-solid phase change material composites as novel form stable phase change materials for flexible thermal energy storage application
Source abstract
Abstract
Abstract In this study, two components based polyethylene glycol (PEG)/thermosetting solid-solid phase change material composites as novel form stable phase change material (FSPCM) were successfully prepared via free-radical polymerization. One of the components consists of PEG-based polyurethane acrylate prepolymer and extra pristine PEG. Another component is made up of 1,6-hexanediol diacrylate and benzoyl peroxide. The extra pristine PEG with low viscosity at melting state was used as diluents to decline the melting viscosity of PUA and served as phase change functional chains of the FSPCMs, endowing the FSPCM with high latent heats and flexible application ability for thermal energy storage. The chemical structure, crystalline performances, phase change properties and thermal reliability and stability of prepared FSPCMs were investigated by Fourier transform infrared spectroscopy, X-ray diffraction, polarizing optical microscopy, differential scanning calorimetry and thermogravimetry analysis, respectively. The leakage test results show that the maximum content of PEG in novel FSPCM without any leakage above the melting point of PEG is 85 wt%. The DSC analysis results show that the novel FSPCMs have high latent heats and the latent heats efficiency of novel FSPCMs is significantly higher than that of the traditional FSPCMs. The prepared FSPCMs exhibit good thermal reliability and stability from the thermal cycling test and TG analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Development of bifunctional microencapsulated phase change materials with crystalline titanium dioxide shell for latent-heat storage and photocatalytic effectiveness10.1016/j.apenergy.2014.11.006 ↗
2. Fabrication and properties of microencapsulated paraffin@SiO2 phase change composite for thermal energy storage10.1021/sc300082m ↗
3. Properties of form-stable paraffin/silicon dioxide/expanded graphite phase change composites prepared by sol–gel method10.1016/j.apenergy.2011.11.018 ↗
4. Emulsion stability and cross-linking of PMMA microcapsules containing phase change materials10.1016/j.solmat.2014.08.036 ↗
5. Novel stearic acid/graphene core–shell composite microcapsule as a phase change material exhibiting high shape stability and performance10.1016/j.solmat.2015.02.009 ↗
6. Solvent-free synthesis and properties of novel solid–solid phase change materials with biodegradable castor oil for thermal energy storage10.1016/j.solmat.2015.12.009 ↗
7. Aqueous preparation of polyethylene glycol/sulfonated graphene phase change composite with enhanced thermal performance10.1016/j.enconman.2013.07.005 ↗
8. Preparation and thermal properties of stearic acid/diatomite composites as form-stable phase change materials for thermal energy storage via direct impregnation method10.1007/s10973-015-5030-1 ↗
9. Facile preparation and thermal performances of hexadecanol/crosslinked polystyrene core/shell nanocapsules as phase change material10.1002/pc.22879 ↗
10. Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials10.1016/j.renene.2014.01.036 ↗
11. Preparation and properties of a novel form-stable phase change material based on a gelator10.1039/C4TA06508E ↗
12. Synthesis and performances of novel solid–solid phase change materials with hexahydroxy compounds for thermal energy storage10.1016/j.apenergy.2014.12.004 ↗
13. Synergistic enhancement of thermal conductivity for expanded graphite and carbon fiber in paraffin/EVA form-stable phase change materials10.1016/j.solener.2016.01.011 ↗
14. A novel solid–solid phase change heat storage material with polyurethane block copolymer structure10.1016/j.enconman.2006.02.022 ↗
15. Preparation and characterization of cross-linking PEG/MDI/PE copolymer as solid–solid phase change heat storage material10.1016/j.solmat.2007.01.011 ↗
16. Preparation and properties of β-cyclodextrin/4,4′-diphenylmethane diisocyanate/polyethylene glycol (β-CD/MDI/PEG) crosslinking copolymers as polymeric solid–solid phase change materials10.1016/j.solmat.2015.10.031 ↗
17. Study on polyethylene glycol/epoxy resin composite as a form-stable phase change material10.1016/j.enconman.2010.06.012 ↗
18. Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage10.1016/j.solmat.2011.01.022 ↗
19. Preparation and performance of a novel thermoplastics polyurethane solid–solid phase change materials for energy storage10.1016/j.solmat.2012.03.034 ↗
20. Linear polyurethane ionomers as solid–solid phase change materials for thermal energy storage10.1016/j.solmat.2014.07.036 ↗
21. Polyurethanes as solid–solid phase change materials for thermal energy storage10.1016/j.solener.2012.03.012 ↗
22. Hyperbranched polyurethane as novel solid–solid phase change material for thermal energy storage10.1016/j.eurpolymj.2006.07.020 ↗
23. Thermosetting solid–solid phase change materials composed of poly(ethylene glycol)-based two components: flexible application for thermal energy storage10.1016/j.cej.2016.01.096 ↗
24. Preparation and properties of polyethylene glycol based semi-interpenetrating polymer network as novel form-stable phase change materials for thermal energy storage10.1016/j.enbuild.2016.06.009 ↗
25. Electrospun phase change fibers based on polyethylene glycol/cellulose acetate blends10.1016/j.apenergy.2011.02.026 ↗
26. Thermal and electrical conductivity enhancement of graphite nanoplatelets on form-stable polyethylene glycol/polymethyl methacrylate composite phase change materials10.1016/j.energy.2012.01.011 ↗