Assessing the origin of the S-shaped I–V curve in organic solar cells: An improved equivalent circuit model
Source abstract
Abstract
Abstract Formation of S-shaped I – V curve or the so-called kink has been shown detrimental to organic solar cells (OSC) performance. Previous researches have indicated that a variety of reasons could count for the origin of the S-shaped I – V curve. However, its origin is still not clear. In this contribution, we investigated the origin of S-shaped I – V curve from the view of an equivalent circuit model (ECM) in OSCs. The proposed ECM involves a rectifying junction connected with a donor/accepter (D/A) junction in series. OSCs with and without a Schottky barrier that was a rectifying junction were fabricated to verify the modeled results. And the good reproduction of experimental results confirmed the validity of our model. The results indicate that the origin of S-shaped I – V curve in OSCs is associated with the rectifying junction. With this model, the effects of the rectifying junction on the shape of I – V characteristic and its effect on device parameters are analyzed: fill factor (FF) dropped, short circuit current density decreased, open circuit voltage however, remained. Also, from simulation, we varied the parameters of the rectifying junction to study their influence on the device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Molecular Junctions and Nanostructures · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
2. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
3. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
4. 6.5% efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C(60) bisadduct by device optimization10.1002/adma.201001339 ↗
5. A robust inter-connecting layer for achieving high performance tandem polymer solar cells10.1002/adma.201100221 ↗
6. Dual plasmonic nanostructures for high performance inverted organic solar cells10.1002/adma.201200120 ↗
7. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
8. 10.2% power conversion efficiency polymer tandem solar cells consisting of two identical sub-cells10.1002/adma.201300964 ↗
9. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
10. Stability of polymer solar cells10.1002/adma.201104187 ↗
11. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
12. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
13. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
14. Life-cycle analysis of product integrated polymer solar cells10.1039/c1ee01127h ↗
15. Efficiency limits of organic bulk heterojunction solar cells10.1021/jp906292h ↗
16. Charge carrier transporting molecular materials and their applications in devices10.1021/cr050143+ ↗
17. Charge photogeneration in organic solar cells10.1021/cr900271s ↗
18. Exciton formation, relaxation, and decay in PCDTBT10.1021/ja105290e ↗
19. Analysis of the failure mechanism for a stable organic photovoltaic during 10 000h of testing10.1002/pip.794 ↗
20. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
21. Sb2O3 anode buffer induced morphology improvement in small molecule organic solar cells10.1063/1.3635386 ↗
22. Synthesis and photovoltaic properties of ester group functionalized polythiophene derivatives10.1002/marc.201000711 ↗
23. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
24. Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating10.1021/am100505e ↗
25. Influence of hole-transport layers and donor materials on open-circuit voltage and shape of I–V curves of organic solar cells10.1002/adfm.201002669 ↗
26. Charge accumulation induced S-shape J–V curves in bilayer heterojunction organic solar cells10.1016/j.orgel.2011.02.016 ↗
27. S-shaped current–voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗
28. Dipole induced anomalous S-shape I–V curves in polymer solar cells10.1063/1.3117513 ↗
29. Imbalanced mobilities causing S-shaped IV curves in planar heterojunction organic solar cells10.1063/1.3553764 ↗
30. An improved solar cell circuit model for organic solar cells10.1016/j.solmat.2005.05.017 ↗
31. Equivalent circuit model for organic single-layer diodes10.1063/1.2980324 ↗
32. An equivalent circuit approach to organic solar cell modelling10.1016/j.mejo.2008.01.053 ↗
33. Influence of P3HT:PCBM blend preparation on the active layer morphology and cell degradation10.1016/j.microrel.2010.09.016 ↗
34. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
35. Inverted organic solar cells comprising a solution-processed cesium fluoride interlayer10.1063/1.3548860 ↗
36. Modeling the current–voltage characteristics of bilayer polymer photovoltaic devices10.1103/PhysRevB.67.075205 ↗
37. A numerical model for explaining the role of the interface morphology in composite solar cells10.1063/1.2817603 ↗
38. Polymer–electrode interfacial effect on photovoltaic performances in poly(3-hexylthiophene):phenyl-c61-butyric acid methyl ester based solar cells10.1021/jp906277k ↗
39. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
40. Doping of the metal oxide nanostructure and its influence in organic electronics10.1002/adfm.200801639 ↗
41. Air-stable inverted structure of hybrid solar cells using a cesium-doped ZnO electron transport layer prepared by a sol–gel process10.1039/c3ta12425h ↗
42. Schottky diode solar cells on electrodeposited copper phthalocyanine films10.1016/j.solmat.2008.03.015 ↗