Polymeric mesh for durable infra-red transparent convection shields: Applications in cool roofs and sky cooling
Source abstract
Abstract
Abstract Polyethylene (PE) mesh is shown to strongly suppress convective gain at night and to have a high black body transmittance, making it suited to use in radiative cooling. Advantages over previous non-porous cover systems include; self-supporting for large areas, good mechanical stability, low cost, retractable, and a long outdoor lifetime. This study compares performance with a PE mesh cover to that of an impermeable PE cover and to no cover. Convective suppression and net cooling for different wind speeds and ambient temperatures are examined. The impact of such a mesh on night sky cooling rates for a mesh over water, then over a roof is presented. For the roof the associated rise in surface temperature is also measured and modelled in the daytime. Effective permeabilities are not the same as geometric permeability. They are extracted by comparing simulation results with data and are found to depend only weakly on wind speed. They are most sensitive to magnitude and sign of the difference between roof and ambient temperatures. They differ significantly between night and day, that is for convective warming and cooling respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Urban Heat Island Mitigation · Building Energy and Comfort Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Selective covers for natural cooling devices10.1007/BF02507668 ↗
2. Radiative cooling to low temperatures: General considerations and application to selectively emitting SiO films10.1063/1.329270 ↗
3. Radiative cooling with MgO and/or LiF layers10.1364/AO.23.000370 ↗
4. Smith · 2010
5. The input and algorithms to the SRI index are described in ASTM E1980. A calculator for estimating SRI is available from 〈http://HeatIsland.lbl.gov〉. Two numerical inputs required are solar reflectance and thermal emittance.
6. T.G. Carter, Issues and solutions to more realistically simulate conventional and cool roofs, in: V. Soebarto, H. Bennetts, P. Bannister, P.C. Thomas, D. Leach (Eds.), Proceedings of the Building Simulation (12th IBPSA—International Building Performance and Simulation Association Conference),Sydney Australia 2011.
7. Optimized cool roofs: Integrating albedo and thermal emittance with R-value10.1016/j.solmat.2011.07.018 ↗
8. Condensation of water by radiative cooling10.1016/0960-1481(94)90388-3 ↗
9. Infrared-transparent convection shields for radiative cooling: Initial results on corrugated polyethylene foils10.1016/0165-1633(85)90002-4 ↗
10. A robust convection cover material for selective for radiative cooling applications10.1016/j.solmat.2011.05.027 ↗
11. Thermal, structural and optical properties of Cleartran® multispectral zinc sulphide10.1117/1.3006123 ↗
12. Radiative heat pumping from the earth using surface phonon resonant nanoparticles10.1021/nl903271d ↗
13. Perspectives sur l'utilisation des rayonnements solaires et terrestres dans certaines régions du monde
14. Amplified radiative cooling via optimised combinations of aperture geometry and spectral emittance profiles of surfaces and the atmosphere10.1016/j.solmat.2009.05.015 ↗
15. An investigation into use of a wind shield to reduce the convective heat flux to a nocturnal radiative cooling surface10.1016/j.renene.2006.03.007 ↗
16. Solar heating and radiative cooling using a solar collector-sky radiator with a spectrally selective surface10.1016/S0038-092X(87)80026-9 ↗
17. Sydney RMY (Representative Meteorological Year) weather data 〈http://apps1.eere.energy.gov/buildings/energyplus/cfm/weather_data3.cfm/region=5_southwest_pacific_wmo_region_5/country=AUS/cname=Australia〉