journal article·2013-10

Nano-domain behaviour in P3HT:PCBM nanoparticles, relating material properties to morphological changes

Natalie P. Holmes, Kerry B. Burke, Prakash Sista, Matthew Barr, Harsha D. Magurudeniya, Mihaela C. Stefan, A.L.David Kilcoyne, Xiaojing Zhou, Paul C. Dastoor, Warwick J. Belcher

Publisher page

Abstract

Abstract In this article we report a morphological study of the poly(3-hexylthiophene) (P3HT): phenyl-C61-butyric acid methyl ester (PCBM) material system in nanoparticle organic thin films. The morphology and chemical composition of unannealed and annealed P3HT:PCBM nanoparticles has been investigated using scanning transmission X-ray microscopy (STXM) for a range of P3HT molecular weights (Mw=5–72 kg mol−1). Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) have been used to support the STXM data. We find that unannealed P3HT:PCBM nanoparticles (NPs) exhibit a common core–shell morphology, with a PCBM-rich core and P3HT-rich shell. The morphology of the thermally annealed NP films is highly dependent upon the molecular weight of the P3HT and is determined by PCBM diffusion through the P3HT matrix. Two PCBM diffusion mechanisms operate within this system: (1) at high molecular weights diffusion of molecular PCBM dominates whilst, (2) at low molecular weights diffusion of the PCBM cores is significant. The Stokes–Einstein continuum model for diffusion has been used to determine a threshold molecular weight at which the diffusion of PCBM cores is activated in these films. The calculated value (Mw~38–25 kg mol−1) is shown to agree very well with experimental observations. Finally, a model for the morphological evolution of annealed P3HT:PCBM NP films is developed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. A multilayered approach to polyfluorene water-based organic photovoltaics10.1016/j.solmat.2012.03.016 ↗
2. Synthesis, properties, and electronic applications of size-controlled poly(3-hexylthiophene) nanoparticles10.1021/la1022938 ↗
3. Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗
4. Inkjet printed surface cell light-emitting devices from a water-based polymer dispersion10.1016/j.orgel.2007.10.007 ↗
5. Phase separation of binary blends in polymer nanoparticles10.1002/smll.200600606 ↗
6. Scanning transmission X-ray microscopy of polymer nanoparticles: probing morphology on sub-10nm length scales
7. Single nanoparticle of organic p-type and n-type hybrid materials: nanoscale phase separation and photovoltaic effect10.1039/C1JM13952E ↗
8. Optimization of the bulk heterojunction composition for enhanced photovoltaic properties: correlation between the molecular weight of the semiconducting polymer and device performance10.1021/jp207669j ↗
9. Diagram of the P3HT: PCBM organic photovoltaic system: implications for device processing and performance10.1021/ma102524a ↗
10. Miscibility, crystallinity, and phase development in P3HT/PCBM solar cells: toward an enlightened understanding of device morphology and stability10.1021/jz2014902 ↗
11. P3HT: PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
12. In situ Wilhelmy balance surface energy determination of poly(3-hexylthiophene) and poly(3,4-ethylenedioxythiophene) during electrochemical doping-dedoping10.1021/la061606p ↗
13. Vertical phase separation in spin-coated films of a low bandgap polyfluorene/PCBM blend—effects of specific substrate interaction10.1016/j.apsusc.2006.08.024 ↗
14. On the movement of small particles suspended in stationary liquids required by the molecular-kinetic theory of heat10.1002/andp.19053220806 ↗
15. Melt viscosity–molecular weight relationship for linear polymers10.1021/ma00175a030 ↗
16. Crystalline and conductive poly(3-hexylthiophene) fibers10.1002/mame.201100092 ↗
17. Effect of matrix molecular weight on the coarsening mechanism of polymer-grafted gold nanocrystals10.1021/la100840a ↗
18. Organic semiconductor growth and morphology considerations for organic thin-film transistors10.1002/adma.200903193 ↗
19. Size analysis of single fullerene molecules by electron microscopy10.1016/j.carbon.2004.03.022 ↗
20. A quantitative study of PCBM diffusion during annealing of P3HT:PCBM blend films10.1021/ma901444u ↗
21. Molecular miscibility of polymer–fullerene blends10.1021/jz101276h ↗
22. A simple method to prepare head-to-tail coupled, regioregular poly(3-alkylthiophenes) using grignard metathesis10.1002/(SICI)1521-4095(199903)11:3<250::AID-ADMA250>3.0.CO;2-J ↗
23. Regioregular, head-to-tail coupled poly(3-alkylthiophenes) made easy by the GRIM method: investigation of the reaction and the origin of regioselectivity10.1021/ma001677+ ↗
24. Experimental evidence for the quasi-“living” nature of the grignard metathesis method for the synthesis of regioregular poly(3-alkylthiophenes)10.1021/ma051122k ↗
25. Semiconducting polymer nanospheres in aqueous dispersion prepared by a miniemulsion process10.1002/1521-4095(20020503)14:9<651::AID-ADMA651>3.0.CO;2-V ↗
26. Interferometer-controlled scanning transmission X-ray microscopes at the advanced light source10.1107/S0909049502017739 ↗
27. Nano-scale quantitative chemical mapping of conjugated polymer blends10.1021/nl060583w ↗
28. Vertical stratification and interfacial structure in P3HT:PCBM organic solar cells10.1021/jp104695j ↗