journal article·2011-03

Analysis of internal quantum efficiency in double-graded bandgap solar cells including sub-bandgap absorption

M. Troviano, K. Taretto

Publisher page

Abstract

Abstract State of the art ZnO/CdS/Cu(In,Ga)Se 2 (CIGS) solar cells use bandgap grading, requiring special tools for the analysis of the experimentally obtained characteristic curves. We develop an analytical model for the photon flux and internal quantum efficiency in double-graded bandgap solar cells, considering the effects of sub-bandgap absorption and grading-dependent carrier collection properties. The short-circuit photocurrent density is calculated as a function of carrier diffusion length and front/back bandgaps, establishing optimum design criteria under solar operation. Even for a diffusion length of only 0.5 μm in a 3-μm-thick absorber, and no contribution from the CdS layer, an optimum back bandgap of 1.35 eV is found, yielding short-circuit current densities of 36.0 (33.5) mA cm −2 for a front bandgap of 1.05 (1.68) eV. Furthermore, simplifications to the model for specific energy ranges allow to extract the Urbach Energy E U and the minimum bandgap E g,min in the grading profile from experimental IQE curves. Finally, our model fits IQE measurements of 18% efficient CIGS solar cells, yielding values of E U between 31 and 41 meV, minimum bandgaps E g,min between 1.10 and 1.16 eV, and diffusion lengths close to 0.5 μm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. M. Troviano, K. Taretto, Urbach energy in cigs extracted from quantum efficiency analysis of high performance CIGS solar cells, in: EU PVSEC, Hamburg, Germany, 2009, pp. 2933–2937.
2. A new approach to high-efficiency solar cells by band gap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
3. Study of the effect of gallium grading in Cu(In,Ga)Se210.1016/S0040-6090(99)00845-7 ↗
4. The effect of Ga-grading in CIGS thin film solar cells10.1016/j.tsf.2004.11.080 ↗
5. Photogeneration and carrier recombination in graded gap Cu(In,Ga)Se2 solar cells10.1109/16.887004 ↗
6. Back surface band gap gradings in Cu(In,Ga)Se2 solar cells10.1016/S0040-6090(00)01726-0 ↗
7. Bandgap variations for large area Cu(In,Ga)Se2 module production10.1007/3-540-31293-5_12 ↗
8. Computer simulation and modeling of graded bandgap CuInSe2/CdS based solar cells10.1109/16.485544 ↗
9. Band-gap engineering in CdS/Cu(In,Ga)Se2 solar cells10.1063/1.362533 ↗
10. Band-gap grading in Cu(In,Ga)Se2 solar cells10.1016/j.jpcs.2005.09.087 ↗
11. Theoretical analysis of solar cells based on graded band-gap structures10.1063/1.332723 ↗
12. Carrier collection in Cu(In,Ga)Se2 solar cells with graded band gaps and transparent ZnO:Al back contacts10.1016/j.solmat.2006.12.014 ↗
13. Effective absorption coefficient for graded band-gap semiconductors and the expected photocurrent density in solar cells10.1016/j.solmat.2008.02.015 ↗
14. Do built-in fields improve solar cell performance?10.1002/pip.851 ↗
15. Poortmans · 2006
16. Pankove · 1975
17. Electroluminescence analysis of high efficiency Cu(In,Ga)Se2 solar cells10.1063/1.2817959 ↗
18. Orgassa · 2004
19. Nelson · 2003
20. Luque · 2003
21. Institut für Physikalische Elektronik, Stuttgart University, Pfaffenwaldring 47, 70569 Stuttgart, Germany, 〈http://www.ipe.uni-stuttgart.de/〉.
22. High quality baseline for high efficiency CuIn1−xGaxSe2 Solar Cells10.1002/pip.757 ↗
23. Photocapacitance spectroscopy in copper indium diselenide alloys in: S. Siebentritt, U. Rau (Eds.)
24. Electron transport processes in CuIn1−xGaxSe2 films prepared by four source co-evaporation technique10.1016/S0254-0584(01)00462-X ↗
25. J. Mattheis, Personal communication.
26. Optimization by simulated annealing10.1126/science.220.4598.671 ↗