Bandgap grading and Al0.3Ga0.7As heterojunction emitter for highly efficient GaAs-based solar cells
Source abstract
Abstract
Abstract Both an Al0.3Ga0.7As heterojunction in the p-type emitter and a bandgap-graded layer in the n-type light absorbing base were employed in the GaAs-based solar cells. The simulation by AFORS-HET (Helmholtz-Zentrum Berlin) confirmed that the Al0.3Ga0.7As heterojunction enhanced the open-circuit voltage (Voc) by ~2%, and the n-type bandgap grading increased the fill factor by ~1%, respectively. The increased power conversion efficiency by ~3% supported the simulation results. An additional efficiency gain was obtained by the shape optimization of the band bending in the 80-nm compositional profile, increasing Voc up to 1.103 V. The cell with the anti-reflective coating exhibited high performance with a power conversion efficiency of 28.7% under 1 sun illumination, close to the world record of 28.8%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Semiconductor Quantum Structures and Devices · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Solar cell efficiency tables (Version 47)10.1002/pip.2728 ↗
2. Solar energy conversion toward 1 terawatt10.1557/mrs2008.71 ↗
3. Towards an optimized all lattice-matched InAlAs/InGaAsP/InGaAs multijunction solar cell with efficiency >50%10.1063/1.4758300 ↗
4. A review of ultrahigh efficiency III–V semiconductor compound solar cells: multijunction tandem, lower dimensional, photonic up/down conversion and plasmonic nanometallic structures10.3390/en20300504 ↗
5. Co-optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells10.1002/pip.2504 ↗
6. Graded bandgap structure for PbS/CdS/ZnS quantum-dot-sensitized solar cells with a PbxCd1−xS interlayer10.1063/1.4804149 ↗
7. The construction of tandem dye-sensitized solar cells from chemically-derived nanoporous photoelectrodes10.1016/j.jpowsour.2014.10.125 ↗
8. Integration of type-II CdSe/CdSexTe1−x heterojunction nanorods into hierarchically porous TiO2 electrode for efficient solar
9. Perovskites: the emergence of new era for low-cost, high-efficiency solar cells10.1021/jz4020162 ↗
10. M. Woodhouse, A. Goodrich, Manufacturing cost analysis relevant to single- and dual-junction photovoltaic cells fabricated with III-Vs and III-Vs grown on Czochralski silicon, NREL (National Renewable Energy Laboratory) Presentation (NREL/PR-6A20-60126), 〈http://www.nrel.gov/docs/fy14osti/60126.pdf〉, 2014 (accessed 16.04.22).
11. Radiation resistance of wide band gap n+/p AlInGaP solar cell for high-efficient multijunction space solar cells10.1143/JJAP.46.L645 ↗
12. Extreme selectivity in the lift-off of epitaxial GaAs films10.1063/1.98946 ↗
13. GaAs photovoltaics and optoelectronics using releasable multilayer epitaxial assemblies10.1038/nature09054 ↗
14. 26.1% thin-film GaAs solar cell using epitaxial lift-off10.1016/j.solmat.2009.03.027 ↗
15. A repeatable epitaxial lift-off process from a single GaAs substrate for low-cost and high-efficiency III–V solar cells10.1002/aenm.201400589 ↗
16. III–V/Si hybrid photonic devices by direct fusion bonding10.1038/srep00349 ↗
17. Thin film GaAs solar cells with increased quantum efficiency due to light reflection10.1016/j.solmat.2003.11.030 ↗
18. Strong internal and external luminescence as solar cells approach the Shockley-Queisser limit10.1109/JPHOTOV.2012.2198434 ↗
19. F.W. Ragay, E.W.M. Ruigrok, J.H. Wolter, GaAs–AlGaAs heterojunction solar cells with increased open-circuit voltage, in: Proceedings of the IEEE 1st World Conference on Photovoltaic Energy Conversion, 2, 1994, pp. 1934–1937.10.1109/WCPEC.1994.520747 ↗
20. Recombination mechanisms in amorphous silicon/crystalline silicon heterojunction solar cells10.1063/1.372230 ↗
21. Overcoming the pseudomorphic critical thickness limit using compliant substrates10.1063/1.111229 ↗
22. Relaxation of strained-layer semiconductor structures via plastic flow10.1063/1.98667 ↗
23. Defects in epitaxial multilayers: I. Misfit dislocations
24. Properties of Semiconductor Alloys, Group-IV, III–V and II–VI
25. The conduction band structure and deep levels in Ga1−xAlxAs alloys from a high-pressure experiment10.1088/0022-3719/13/23/018 ↗
26. Effect of Al mole fraction on carrier diffusion lengths and lifetimes in AlxGa1−xAs10.1063/1.101955 ↗
27. Investigation of selective junctions using a newly developed tunnel current model for solar cell applications10.1016/j.solmat.2015.05.014 ↗
28. A.S. Gudovskikh, K.S. Zelentsov, N.A. Kalyuzhnyy, V.M. Lantratov, S.A. Mintairov, Anisotype GaAs based heterojunctions for III–V multijunction solar cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference, 2010, pp. 472–476.
29. Design of GaAs solar cells operating close to the Shockley-Queisser limit10.1109/JPHOTOV.2013.2241594 ↗
30. Alloy scattering in p‐type AlxGa1−xAs10.1063/1.350752 ↗
31. Shur · 1990
32. Electronic properties of InGaP grown by solid-source molecular-beam epitaxy with a GaP decomposition source10.1063/1.112373 ↗
33. Selenium and zinc doping in Ga0.5In0.5P and (Al0.5Ga0.5)0.5In0.5P grown by metalorganic chemical vapor deposition10.1063/1.343718 ↗
34. Energy-band structure consequences
35. Band parameters for III–V compound semiconductors and their alloys10.1063/1.1368156 ↗
36. Numerical modelling of GaInP solar cells with AlInP and AlGaAs windows10.1016/j.tsf.2007.12.016 ↗
37. Enhanced external radiative efficiency for 20.8% efficient single-junction GaInP solar cells10.1063/1.4816837 ↗
38. InGaP/GaAs-based multijunction solar cells10.1002/pip.642 ↗
39. B.M. Kayes, H. Nie, T. Twist, S.G. Spruytte, F. Reinhardt, I.C. Kizilyalli, G.S. Higashi, 27.6% Conversion efficiency, a new record for single-junction solar cells under 1sun illumination, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 2011, pp. 4–8.10.1109/PVSC.2011.6185831 ↗