Structural and magnetic properties of erbium doped nanocrystalline Li–Ni ferrites
Source abstract
Abstract
Abstract A series of nanocrystalline Li 0.25 Ni 0.5 Fe 2.25− x Er x O 4 ( x =0.00, 0.02, 0.06, 0.08, and 0.10) ferrite powders, having a cubic spinel crystal structure and a low value of coercivity, was synthesized by the sol–gel auto-combustion route. The structure, morphology and magnetic properties of the prepared nanoferrites were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and the magnetic property measurement system (MPMS). A well-defined single phase spinel structure is confirmed in all the samples by X-ray diffraction analysis. The lattice parameters of the samples increase slightly with increasing the erbium content. The crystallite size of the Er-doped samples is smaller than that of pure Li–Ni ferrite, and decrease regularly in the range of 36.0–14.5 nm. It has been observed that the magnetic properties of these ferrites are strongly influenced by the added erbium content. The magnetic measurements indicate that saturation magnetization ( M s ) and coercivity ( H c ) decrease gradually with the increase of Er content in the lattice.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Electromagnetic wave absorption materials · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. On the magnetic ordering in the disordered spinels ZnxCo1−xFeCrO410.1088/0022-3719/18/31/021 ↗
2. Mossbauer study of Ni0.25Zn0.75Fe2O4. I. Spin fluctuations10.1103/PhysRevB.21.1717 ↗
3. Ferrimagnetic to spin glass transition in the mixed spinel Mg1+tFe2-−2tTitO4: a Mossbauer and DC susceptibility study10.1088/0305-4608/15/9/016 ↗
4. Microstructure, electrical properties and Hall coefficient of europium-doped Li–Ni ferrites10.1016/j.mseb.2008.12.022 ↗
5. Structural analysis and magnetic properties of Gd-doped Li–Ni ferrites prepared using rheological phase reaction method10.1016/S1002-0721(07)60049-0 ↗
6. Synthesis, characterization and effect of sintering temperature on magnetic properties of Mg–Ni ferrite prepared by co-precipitation method10.1016/j.jallcom.2008.08.082 ↗
7. Study of cation distribution for Cu–Co nanoferrites synthesized by the sol–gel method10.1016/j.ceramint.2013.02.001 ↗
8. Synthesis of high-coercivity cobalt ferrite particles using water-in-oil microemulsion10.1016/S0304-8853(96)00280-6 ↗
9. Spark plasma sintering of cobalt ferrite nanopowder prepared by co-precipitation and hydrothermal synthesis10.1016/j.jeurceramsoc.2006.04.141 ↗
10. Effect of processing and polarizer on the electrical properties of Mn–Zn ferrites
11. A low temperature path to the preparation of ultrafine ferrites
12. Lattice expansion and saturation magnetization of Nickel–Zinc ferrite10.1111/j.1551-2916.2007.01980.x ↗
13. Synthesis and magnetic properties of lanthanum substituted lithium–nickel ferrites via a soft chemistry route10.1016/j.physb.2007.05.035 ↗
14. The studies of nanocrystalline Ni0.7Mn0.3NdxFe2−xO4 (x=0–0.1) ferrites10.1016/j.physleta.2004.09.010 ↗
15. The synthesis and the magnetic properties of Nd2O3-doped Ni–Mn ferrites nanoparticles10.1016/j.jmmm.2003.09.030 ↗
16. Structure and magnetic properties of nanocrystalline CoLa0.08Fe1.92O4 ferrite10.1016/j.jmmm.2005.07.033 ↗
17. A study on Cu substituted Ni–Cu–Zn ferrites synthesized using egg-white10.1016/j.jallcom.2009.11.124 ↗