Aqueous gelcasting of ZrB2–SiC ultra high temperature ceramics
Source abstract
Abstract
Abstract ZrB 2 –SiC ultra high temperature ceramics containing B 4 C and C as sintering additives were successfully prepared by aqueous gelcasting and pressureless sintering. Polyacrylic acid (PAA) was used as the dispersant throughout this research. The various effects of zeta potential, pH value, dispersant concentration, solid loading and ball-milling time on the rheology and fluidity behavior of ZrB 2 –SiC suspension were investigated in detail. A well-dispersed suspension with 50 vol.% solid loading was prepared at pH 10 with 0.4 wt.% PAA after ball milling at 240 rpm for 24 h. Then crack-free green ZrB 2 –SiC ceramics were obtained by gelcasting process and then pressureless sintered at 2100 °C to about 98% relative density. The microstructure and mechanical properties were examined, and the flexural strength and fracture toughness were 405 ± 27 MPa and 4.3 ± 0.3 MPa m 1/2 , respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Processing and properties of zirconium diboride-based composites10.1016/S0955-2219(01)00284-9 ↗
2. The thermal stability in air of hot-pressed diboride matrix composites for uses at ultra-high-temperatures10.1016/j.corsci.2004.09.019 ↗
3. Oxidation behavior of ZrB2–MoSi2–SiC composites in air at 1500°C10.1016/j.ceramint.2010.09.034 ↗
4. Stability of ultra-high-temperature ZrB2–SiC ceramics under simulated atmospheric re-entry conditions10.1016/j.jeurceramsoc.2007.02.201 ↗
5. Evaluation of ultra-high temperature ceramics for aeropropulsion use10.1016/S0955-2219(02)00140-1 ↗
6. Ablation behavior of ZrB2–SiC ultra high temperature ceramics under simulated atmospheric re-entry conditions10.1016/j.compscitech.2008.02.009 ↗
7. Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2–SiC10.1007/s10853-006-1274-2 ↗
8. Refractory borides of zirconium and hafnium10.1111/j.1551-2916.2007.01583.x ↗
9. Pressureless densification of zirconium diboride with boron carbide additives10.1111/j.1551-2916.2006.00949.x ↗
10. Pressureless sintering of zirconium diboride: particle size and additive effects10.1111/j.1551-2916.2007.02169.x ↗
11. Pressureless sintering of zirconium diboride using boron carbon and carbon additives10.1111/j.1551-2916.2007.01936.x ↗
12. Pressureless sintering of zirconium diboride10.1111/j.1551-2916.2005.00739.x ↗
13. Properties of slip-cast and pressureless-sintered ZrB2–SiC composites10.1111/j.1744-7402.2009.02484.x ↗
14. Slip casting of ZrB2–SiC composite aqueous suspensions10.1002/adem.200900275 ↗
15. Aqueous tape casting of zirconium diboride10.1111/j.1551-2916.2009.03222.x ↗
16. Microstructure and mechanical properties of zirconium diboride obtained by aqueous tape casting process and hot pressing10.1111/j.1551-2916.2010.04015.x ↗
17. Processing and properties of ZrB2–SiC composites obtained by aqueous tape casting and hot pressing10.1016/j.ceramint.2010.08.044 ↗
18. Dispersion of zirconium diboride in an aqueous high-solids paste10.1111/j.1744-7402.2007.02157.x ↗
19. Gelcasting – a new ceramic forming process
20. Gelcasting of alumina10.1111/j.1151-2916.1991.tb04068.x ↗
21. Gelcasting of PZT10.1016/S0272-8842(02)00151-7 ↗
22. Study on gelcasting and properties of recrystallized silicon carbide10.1016/S0272-8842(01)00104-3 ↗
23. Neural network modeling and analysis of gel casting preparation of porous Si3N4 ceramics10.1016/j.ceramint.2009.04.008 ↗
24. Mechanical properties of short carbon fiber reinforced ZrB2–SiC ceramic matrix composites10.1016/j.matlet.2008.01.076 ↗