A comparative study of SiAlON ceramics
Source abstract
Abstract
Two different varieties of Si3N4 powders were used to prepare SiAlON ceramics. 100% β-Si3N4 was used from refractory grade powders (B1) and another purer 98% α-Si3N4 (50A) powder was used to prepare the SiAlON samples. Since SiC + SiAlON composites reportedly perform better, batches were prepared with 15% SiC addition to the refractory powders (B1) and 17.5% SiC was added to the other SiAlON composition (50A). The samples were gas pressure sintered at 1840 °C and at 22 bar with 1 h dwelling time. Thereby, we could achieve 97–98% theoretical density. The hardness was recorded 14–17 GPa while fracture toughness varied from 4.3 to 5 MPa m1/2. Fretting experiments showed initial running-in period of 300 cycles for all the tribo-couples. After which, the steady state coefficient of frictions (COF) were achieved. Steel ball of 10 mm diameter, fretting against 50A composition, showed 0.6 average steady state COF while the same composition while fretting against alumina ball of the same diameter, showed 0.57 average steady state COF. Results have been compared with SiAlON composition derived from refractory powder (B1) and found that the 50A composition performs better under identical test conditions. Moreover, cytocompatibility study also suggests that the investigated 50A composition can be used as substrate to support cell adhesion and proliferation of L929 mouse fibroblast cell lines whereas B1 composition derived from refractory powders are toxic in nature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Waterhouse · 1992
2. Slip index: a new unified approach to fretting10.1023/B:TRIL.0000044506.98760.f9 ↗
3. Understanding the mechanical properties of hot pressed Ba-doped S-phase SiAlON ceramics10.1016/j.jeurceramsoc.2008.07.005 ↗
4. Tribological properties of a hot-pressed Ba-doped S-phase SiAlON ceramic10.1111/j.1551-2916.2007.01700.x ↗
5. Microstructure development and properties of novel Ba-doped phase SiAlON ceramics10.1016/j.jeurceramsoc.2006.01.004 ↗
6. Friction and wear behaviour of SiAlON ceramics under fretting contacts10.1016/S0921-5093(03)00349-6 ↗
7. Influence of SiC addition on tribological properties of SiAlON10.1016/j.ceramint.2011.03.055 ↗
8. Ceramics for prosthetic hip and knee joint replacement10.1111/j.1551-2916.2007.01725.x ↗
9. The effect of silicon nitride ceramic on rabbit skeletal cells and tissue. An in vitro and in vivo investigation10.1097/00003086-198907000-00032 ↗
10. Enhanced proliferation and osteocalcin production by human osteoblast-like MG63 cells on silicon nitride ceramic discs10.1016/S0142-9612(99)00007-1 ↗
11. Proinflammatory cytokine expression of IL-1beta and TNF-alpha by human osteoblast-like MG-63 cells upon exposure to silicon nitride in vitro10.1002/(SICI)1097-4636(200004)50:1<43::AID-JBM7>3.0.CO;2-A ↗
12. Results of 15-year clinical study of reaction bonded silicon nitride intervertebral spacers
13. Cytotoxicity evaluation of ceramic particles of different sizes and shapes10.1002/jbm.a.20020 ↗
14. Development of α-SiAlON–SiC ceramic composites by liquid phase sintering10.1016/j.ijrmhm.2006.01.004 ↗
15. Development and cytotoxicity evaluation of SiAlONs ceramics10.1016/j.msec.2006.04.003 ↗
16. Cytocompatibility property evaluation of gas pressure sintered SiAlON–SiC composites with L929 fibroblast cells and Saos-2 osteoblast-like cells10.1016/j.msec.2011.11.019 ↗
17. Kinetics of phase transformations in SiAlON ceramics. I: effects of cation size, composition and temperature10.1016/S0955-2219(99)00097-7 ↗
18. Kinetics of phase transformations in SiAlON ceramics. II: reaction paths10.1016/S0955-2219(99)00099-0 ↗
19. New developments in α-SiAlON ceramics – sialons and related nitrogen ceramics10.1016/S0955-2219(99)00111-9 ↗
20. α-SiAlON ceramics: a review10.1021/cm00014a009 ↗
21. Progress in SiAlON ceramics10.1016/S0955-2219(00)00039-X ↗
22. Silicon nitride and related materials10.1111/j.1151-2916.2000.tb01182.x ↗
23. Microstructural design of silicon nitride with improved fracture toughness. I: effects of grain shape and size10.1111/j.1151-2916.1998.tb02702.x ↗
24. Microstructural design of silicon nitride with improved fracture toughness. II: effects of yttria and alumina additives10.1111/j.1151-2916.1998.tb02703.x ↗
25. Ultra-low wear ceramic composite bearings
26. Densification route and mechanical properties of Si3N4-bioglass biocomposites10.1016/S0142-9612(01)00194-6 ↗
27. Editorial: Engineering ceramics market outlook
28. Special ceramics
29. Effect of α to β phase transition on the sintering of silicon nitride ceramics10.1111/j.1151-2916.1990.tb06591.x ↗
30. Reversible α-sialon transformation in heat-treated SiAlON ceramics10.1016/0955-2219(93)90074-2 ↗
31. Effect of starting powder on damage resistance of silicon nitrides10.1111/j.1151-2916.1998.tb02588.x ↗
32. Hampshire · 1983 · 225
33. Relationships between processing, microstructure and properties of dense and reaction-bonded silicon nitride10.1007/BF01161167 ↗
34. Grain growth during gas-pressure sintering of β-silicon nitride10.1111/j.1151-2916.1990.tb07610.x ↗
35. Fine-grained silicon nitride ceramics prepared from β-powder10.1111/j.1151-2916.1995.tb08385.x ↗
36. Effect of β-Si3N4 starting powder size on elongated grain growth in β-Si3N4 ceramics10.1016/S0955-2219(00)00128-X ↗
37. Effect of grain growth of β-silicon nitride on strength, Weibull modulus, and fracture toughness10.1111/j.1151-2916.1993.tb06670.x ↗
38. α–β SiAlON ceramics made from different silicon nitride powders10.1111/j.1151-2916.1988.tb05810.x ↗
39. Phase formation and microstructural evolution of Ca α-sialon using different Si3N4 starting powders10.1016/S0955-2219(00)00058-3 ↗
40. A. Rosenflanz, α-SiAlON: phase stability, phase transformations, and microstructural evolutions, PhD thesis, Michigan University, 1997, pp. 178–179.
41. Influence of β-Si3N4 particle size and heat treatment on microstructural evolution of α:β-SiAlON ceramics10.1016/j.jeurceramsoc.2010.10.001 ↗
42. Microstructure–mechanical properties–wear resistance relationship of SiAlON ceramics10.1007/s11661-009-9930-1 ↗
43. Fracture toughness determinations by indentation10.1111/j.1151-2916.1976.tb10991.x ↗
44. Laboratory testing of displacement and load induced fretting10.1016/0301-679X(95)00005-O ↗
45. Fretting wear of selected ceramics and cermets10.1016/0043-1648(94)90085-X ↗
46. Rapid colorimetric assay for cellular growth and survival: application to proliferation and cytotoxicity assays10.1016/0022-1759(83)90303-4 ↗
47. Sintering and HIPing of silicon nitride–silicon carbide composite materials10.1016/0272-8842(87)90034-4 ↗
48. Hot-pressed Si3N4–SiC whisker composites10.1016/0921-5093(89)90615-1 ↗
49. Phase transformation, microstructure and mechanical properties of Si3N4/SiC composite10.1016/S0955-2219(01)00193-5 ↗
50. Albert · 2002