Study on high performance plastering mortar based on graphene oxide
Source abstract
Abstract
Graphene Oxide (GO) has emerged as a promising nano-additive for enhancing the properties of cement-based materials. In this paper, five plastering mortar formulations with varying GO dosages (0‰, 2‰, 4‰, 6‰, and 8‰ by potland cement) were prepared to investigate the effects of GO on mechanical performance, durability, and microstructural evolution. The results indicate that, although GO contributes only a limited improvement to compressive strength, it significantly enhances bond strength by up to 200% under diverse curing conditions. Moderate GO dosages (e.g., 4‰) also improve water retention and abrasion resistance, while higher dosages disrupt the internal microstructure, leading to reduced performance. GO incorporation increases the proportion of ≤30 nm pores and improves thermal stability. Additionally, a preferential formation of calcium silicate hydrate at the expense of calcium hydroxide, yielding a denser microstructure. These findings highlight the importance of dosage optimization in leveraging GO’s potential to enhance key performance attributes of plastering mortars, providing insights for the development of high-performance cementitious coatings in construction applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Microbial Applications in Construction Materials · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Engineering, Mianyang Polytechnic, Mianyang 621000, Sichuan, P. R. China
Guangdong Longhu Sci. and Tech. Company Limited Mianyang Technical Center, 621000, Mianyang,PR China
Southwest University of Science and Technology, Mianyang 621010, Sichuan, P. R. China
References
Reference metadata was not supplied for this record.