Dissimilar surface treated recycled coarse aggregate in concrete

The surface zone of the recycled aggregate plays a significant role in the strength and durability of concrete. In this research, various concrete series incorporating natural coarse aggregate [NCA], untreated recycled coarse aggregate RCA(UN), mechanical scrubbing treated coarse aggregate RCA(MS), sulfuric acid treated coarse aggregate RCA(H2SO4) and hydrochloric acid treated aggregate RCA(HCl) were investigated. Manufactured sand was used as an alternative to natural river sand in five series of concrete with 100% replacement ratio. The mechanical properties: compressive, split tensile, and flexural strength, respectively, were determined at the age of 28 and 56 days. Durability properties: water absorption, drying, sulfuric acid, sodium sulphate and sorptivity test were determined at the age of 28, 56 and 90 days and the results were compared to reference concrete. According to the results, RCA(UN) was found to marginally decreased the concrete performance, and the above mentioned treated aggregate shows a significant improvement in overall performance compared to RCA(UN), especially RCA(MS), which enhances the concrete more significantly than other methods. Moreover, the scanning electron microscope results also emphasize the enhanced microstructure of treated recycled aggregate in concrete. The photographic view of the cross sections of the samples shows a superior interfacial transition zone in all kinds of treated aggregate concrete than in untreated recycled aggregate concrete.