Giant Deformation Induced Staggered‐Layer Structure Promoting the Thermoelectric and Mechanical Performance in n‐Type Bi₂(Te, Se)₃

Abstract Bismuth telluride has long been recognized as the most promising near‐room temperature thermoelectric material for commercial application; however, the thermoelectric performance for n‐type Bi₂(Te, Se)₃‐based alloys is far lagging behind that of its p‐type counterpart. In this work, a giant hot deformation (GD) process is implemented in an optimized Bi₂Te_2.694Se_0.3I_0.006+3 wt%K₂Bi₈Se₁₃ precursor and generates a unique staggered‐layer structure. The staggered‐layered structure, which is only observed in severely deformed crystals, exhibits a preferential scattering on heat‐carrying phonons rather than charge‐carrying electrons, thus resulting in an ultralow lattice thermal conductivity while retaining high‐weight carrier mobility. Moreover, the staggered‐layer structure is located adjacent to the van der Waals gap in Bi₂(Te, Se)₃ lattice and is able to strengthen the interaction between anion layers across the gap, leading to obviously improved compressive strength and Vickers hardness. Consequently, a high peak figure of merit ZT of ≈ 1.3 at 423 K, and an average ZT of ≈ 1.2 at 300–473 K can be achieved in GD sample. This study demonstrates that the GD process can successfully decouple the electrical and thermal transports with simultaneously enhanced mechanic performance.