Dopant Enhanced Conjugated Polymer Thin Film for Low‐Power, Flexible and Wearable DMMP Sensor

Abstract Conjugated polymer has the potential to be applied on flexible devices as an active layer, but further investigation is still hindered by poor conductivity and mechanical stability. Here, this work demonstrates a dopant‐enhanced conductive polymer thin film and its application in dimethyl methylphosphonate (DMMP) sensor. Among five comparable polymers this work employs, poly(bisdodecylthioquaterthiophene) (PQTS12) achieves the highest doping efficiency after doped by FeCl₃, with the conductivity increasing by about five orders of magnitude. The changes in Young's modulus are also considered to optimize the conductivity and flexibility of this thin film, and finally the decay of conductivity is only 9.2% after 3000 times of mechanical bending. This work applies this thin film as the active layer of the DMMP gas sensor, which could be operated under 1 mV driving voltage and 28 nW power consumption, with a sustainable durability against bending and compression. In addition, this sensor is provided with alarm capability while exposed to the DMMP atmospheres at different hazard levels. This work expects that this general approach could offer solutions for the fabrication of low‐power and flexible gas sensors, and provide guidance for next‐generation wearable devices with broader applications.