Understanding the Memory Window Overestimation of 2D Materials Based Floating Gate Type Memory Devices by Measuring Floating Gate Voltage

Abstract The memory window of floating gate (FG) type non‐volatile memory (NVM) devices is a fundamental figure of merit used not only to evaluate the performance, such as retention and endurance, but also to discuss the feasibility of advanced functional memory devices. However, the memory window of 2D materials based NVM devices is historically determined from round sweep transfer curves, while that of conventional Si NVM devices is determined from high and low threshold voltages (V_ths), which are measured by single sweep transfer curves. Here, it is elucidated that the memory window of 2D NVM devices determined from round sweep transfer curves is overestimated compared with that determined from single sweep transfer curves. The floating gate voltage measurement proposed in this study clarifies that the V_ths in round sweep are controlled not only by the number of charges stored in floating gate but also by capacitive coupling between floating gate and back gate. The present finding on the overestimation of memory window enables to appropriately evaluate the potential of 2D NVM devices.