Enabling carbon dioxide mineralization and active set control in portlandite-based cementitious suspensions
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Readily implementable techniques can cut annual CO2 emissions from the production of concrete by over 20%10.1088/1748-9326/11/7/074029 ↗
2. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
3. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
4. Recent progress in low-carbon binders10.1016/j.cemconres.2019.05.009 ↗
5. Rheological and mechanical properties of 3D printable alkali-activated slag mixtures with addition of nano clay10.1016/j.cemconcomp.2023.104995 ↗
6. Early age hydration of calcium sulfoaluminate (synthetic ye’elimite, C 4A3S) in the presence of gypsum and varying amounts of calcium hydroxide10.1016/j.cemconres.2013.03.001 ↗
7. Alternative cement clinkers10.1016/j.cemconres.2017.02.002 ↗
8. A review of alternative approaches to the reduction of CO2 emissions associated with the manufacture of the binder phase in concrete10.1016/j.cemconres.2015.04.012 ↗
9. Hydration studies of calcium sulfoaluminate cements blended with fly ash10.1016/j.cemconres.2013.07.010 ↗
10. Carbonation behavior of hydraulic and non-hydraulic calcium silicates: potential of utilizing low-lime calcium silicates in cement-based materials10.1007/s10853-016-9909-4 ↗
11. Strength and microstructure of CO2 cured low-calcium clinker10.1016/j.conbuildmat.2018.08.134 ↗
12. Clinkering-free cementation by fly ash carbonation10.1016/j.jcou.2017.11.005 ↗
13. Recent advances in carbonatable binders10.1016/j.cemconres.2023.107286 ↗
14. Carbonation activated binders from pure calcium silicates: reaction kinetics and performance controlling factors10.1016/j.cemconcomp.2018.07.004 ↗
15. Effect of pre-conditioning on CO2 curing of lightweight concrete blocks mixtures10.1016/j.conbuildmat.2011.06.020 ↗
16. Effect of pulverized fuel ash and CO2 curing on the water resistance of magnesium oxychloride cement (MOC)10.1016/j.cemconres.2017.03.005 ↗
17. High-strength KOBM steel slag binder activated by carbonation10.1016/j.conbuildmat.2015.09.028 ↗
18. Alcohol dispersions of calcium hydroxide nanoparticles for stone conservation10.1021/la4017728 ↗
19. New insights into the mechanisms of carbon dioxide mineralization by portlandite10.1002/aic.17160 ↗
20. Direct carbonation of Ca(OH)2 using liquid and supercritical CO2: implications for carbon-neutral cementation10.1021/acs.iecr.5b02356 ↗
21. How microstructure and pore moisture affect strength gain in portlandite-enriched composites that mineralize CO210.1021/acssuschemeng.9b02163 ↗
22. The role of gas flow distributions on CO2mineralization within monolithic cemented composites: Coupled CFD-factorial design approach10.1039/D0RE00433B ↗
23. Calcination-free production of calcium hydroxide at sub-boiling temperatures10.1039/D0RA08449B ↗
24. E. National Academies of Sciences, Gaseous Carbon Waste Streams Utilization : Status and Research Needs, n.d.
25. Vision of 3D printing with concrete — technical , economic and environmental potentials10.1016/j.cemconres.2018.06.001 ↗
26. Stiffening control of cement-based materials using accelerators in inline mixing processes: possibilities and challenges10.1016/j.cemconcomp.2021.103972 ↗
27. Set-on-demand of alkali-activated slag mixture using twin-pipe pumping10.1016/j.conbuildmat.2023.132003 ↗
28. Temperature-induced aggregation in portlandite suspensions10.1021/acs.langmuir.0c01798 ↗
29. N.S. Martys, C.F. Ferraris, V. Gupta, J.H. Cheung, J.G. Hagedorn, A.P. Peskin, E.J. Garboczi, Computational Model Predictions of Suspension Rheology: Comparison to Experiment, n.d.
30. Rheology, early-age hydration and microstructure of alkali-activated GGBFS-Fly ash-limestone mixtures10.1016/j.cemconcomp.2021.104244 ↗
31. Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM C618 (n.d.). https://doi.org/10.1520/C0618-19.10.1520/C0618-19 ↗
32. Ultrafast stiffening of concentrated thermoresponsive mineral suspensions10.1016/j.matdes.2022.110905 ↗
33. Rheology and structural build-up of sodium silicate- and sodium hydroxide-activated GGBFS mixtures10.1016/j.cemconcomp.2022.104570 ↗
34. Flow properties of MK-based geopolymer pastes. A comparative study with standard Portland cement pastes10.1039/c3sm51889b ↗
35. Influence of water to binder ratio on the rheology and structural Build-up of Alkali-Activated Slag/Fly ash mixtures10.1016/j.conbuildmat.2020.120253 ↗
36. Effect of relative humidity on the carbonation rate of portlandite, calcium silicate hydrates and ettringite10.1016/j.cemconres.2020.106116 ↗
37. Carbonation of CH and C-S-H in composite cement pastes containing high amounts of BFS10.1016/j.cemconres.2009.10.020 ↗
38. Rilem tc - 238 SCM Recommendation on hydration stoppage by solvent exchange for the study of hydrate assemblages
39. Thermally stimulated stiffening and fly ash's alkaline activation by Ca(OH)2 addition facilitates 3D-printing10.1016/j.cemconcomp.2024.105870 ↗
40. FullControl GCode Designer: open-source software for unconstrained design in additive manufacturing
41. 3D printable concrete: mixture design and test methods10.1016/j.cemconcomp.2018.12.014 ↗
42. 3D printing geopolymers: a review10.1016/j.cemconcomp.2022.104455 ↗
43. 3D printing using concrete extrusion: a roadmap for research10.1016/j.cemconres.2018.05.006 ↗
44. Recent advances on yield stress and elasticity of fresh cement-based materials10.1016/j.cemconres.2019.105798 ↗
45. The origins of thixotropy of fresh cement pastes10.1016/j.cemconres.2011.09.004 ↗
46. Dispersing nano- A nd micro-sized portlandite particulates: via electrosteric exclusion at short screening lengths10.1039/D0SM00045K ↗
47. The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash10.1016/j.cemconres.2013.07.007 ↗
48. Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes10.1016/j.cemconres.2018.04.008 ↗
49. Yodel: a yield stress model for suspensions10.1111/j.1551-2916.2005.00888.x ↗
50. 3D printing using concrete extrusion: a roadmap for research10.1016/j.cemconres.2018.05.006 ↗
51. Steady state flow of cement suspensions: a micromechanical state of the art10.1016/j.cemconres.2009.08.026 ↗
52. Munk · 2002
53. Viscosity transition from dilute to concentrated cementitious suspensions: the effect of colloidal interactions and flocs percolation
54. Observations on the rheological response of alkali activated fly ash suspensions: the role of activator type and concentration10.1007/s00397-014-0793-z ↗
55. Evolution of elastic behavior of alite paste at early hydration stages10.1111/jace.17354 ↗
56. Electrosteric control of the aggregation and yielding behavior of concentrated portlandite suspensions10.1021/acs.langmuir.3c00704 ↗
57. Brandrup · 1999
58. Kinetics of surface-initiated atom transfer radical polymerization of acrylamide on silica10.1021/ma011313x ↗
59. Controlled/living radical polymerization in dispersed systems10.1021/cr800242x ↗
60. Fly ash-Ca(OH)2Reactivity in hypersaline NaCl and CaCl2Brines10.1021/acssuschemeng.1c01884 ↗
61. Fly ash effects: II. The active effect of fly ash10.1016/j.cemconres.2003.03.001 ↗
62. Activation of fly ash cementitious systems in the presence of quicklime: Part I. Compressive strength and pozzolanic reaction rate10.1016/j.cemconres.2003.08.008 ↗
63. Effect of temperature on the hydration of Portland cement blended with siliceous fly ash10.1016/j.cemconres.2013.07.006 ↗
64. Activation of the fly ash pozzolanic reaction by hydrothermal conditions10.1016/S0008-8846(03)00085-1 ↗
65. Carbonation, strength development, and characterization of calcined limestone as a potential construction material10.1016/j.cemconres.2020.106263 ↗
66. Investigation of the carbonation front shape on cementitious materials: effects of the chemical kinetics10.1016/j.cemconres.2007.04.002 ↗
67. Measurement methods of carbonation profiles in concrete: thermogravimetry, chemical analysis and gammadensimetry10.1016/j.cemconres.2007.04.015 ↗
68. Role of calcium hydroxide in the alkaline activation of coal fly ash10.1016/j.cemconcomp.2022.104925 ↗
69. Role of calcium hydroxide in the alkaline activation of coal fly ash10.1016/j.cemconcomp.2022.104925 ↗
70. Pore structure characterization of cement pastes blended with high-volume fly-ash10.1016/j.cemconres.2011.09.012 ↗
71. Effect of polyacrylamide on the carbonation behavior of cement paste10.1016/j.cemconres.2022.106756 ↗
72. Rheological requirements for printable concretes10.1016/j.cemconres.2018.04.005 ↗
73. Extrusion-based additive manufacturing with cement-based materials – production steps, processes, and their underlying physics: a review10.1016/j.cemconres.2020.106037 ↗
74. A dual binder concept for 3D printing ink: Triggered polymerization for rapid stiffening and carbonation for final strength10.1016/j.matdes.2025.113598 ↗
75. G. Sant; S. B. kandy; T. Gädt; I. Mehdipour; T. Ranganathan; S. Srivastava; P. Seiler;, Thermoresponsvie suspension composites for 3D printing, US11951682, 2024.
76. Design and function of thermoresponsive-ultrafast stiffening suspension formulations for 3D printing10.1016/j.cemconcomp.2024.105905 ↗