Rheology and structural build-up of sodium silicate- and sodium hydroxide-activated GGBFS mixtures
Source abstract
Abstract
Alkali-activated slag cements (AAS) are considered as an alternative to portland cement (PC) in many studies. A significant number of studies have focused on their mechanical and durability properties, but very few studies have concentrated on their rheological behavior. In this study, the effects of sodium silicate and sodium hydroxide on the rheological properties and structural build-up of alkali-activated GGBFS mixtures have been investigated. The sodium silicate-activated GGBFS mixtures exhibited a lower yield stress and a higher plastic viscosity than sodium hydroxide-activated GGBFS mixtures. The small-amplitude oscillatory shear (SAOS) tests indicated a negligible colloidal interaction between GGBFS particles in sodium silicate-activated system; therefore, the early increase in structuration was associated with the formation of reaction products due to the interaction between the dissolved calcium ions and the silicates originated from the activator solution. On the other hand, the stiffness and the early increase in structural build-up of sodium hydroxide-activated GGBFS system were attributed to the formation of well-percolated network.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Global strategies and potentials to curb CO2 emissions in cement industry10.1016/j.jclepro.2012.10.049 ↗
2. Trends and developments in green cement and concrete technology10.1016/j.ijsbe.2013.05.001 ↗
3. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
4. Strength and drying shrinkage of alkali-activated slag paste and mortar10.1155/2012/579732 ↗
5. Microstructural and mechanical properties of alkali activated Colombian raw materials10.3390/ma9030158 ↗
6. External sulfate attack on alkali-activated slag10.1016/j.conbuildmat.2013.08.013 ↗
7. A review on alkaline activation: new analytical perspectives
8. Effects of activator properties and GGBFS/FA ratio on the structural build-up and rheology of AAC10.1016/j.cemconres.2020.106253 ↗
9. Rheology of alkali-activated slag pastes. Effect of the nature and concentration of the activating solution10.1016/j.cemconcomp.2014.07.012 ↗
10. Rheology and setting of alkali-activated slag pastes and mortars: effect if organic admixture
11. Rheology of fly ash-based geopolymer: effect of NaOH concentration10.1016/j.conbuildmat.2019.07.028 ↗
12. Influence of the alkaline solution and temperature on the rheology and reactivity of alkali-activated fly ash pastes10.1016/j.cemconcomp.2018.08.010 ↗
13. Evidence of a fractal percolating network during geopolymerization
14. Structural evolution during geopolymerization from an early age to consolidated material10.1021/la300868v ↗
15. Early reactivity of sodium silicate-activated slag pastes and its impact on rheological properties10.1016/j.cemconres.2020.106302 ↗
16. Enhancing thixotropy and structural build-up of alkali- activated slag/fly ash pastes with nano clay10.1617/s11527-021-01760-4 ↗
17. Influence of water to binder ratio on the rheology and structural Build-up of Alkali-Activated Slag/Fly ash mixtures10.1016/j.conbuildmat.2020.120253 ↗
18. Rheology and microstructure of alkali-activated slag cements produced with silica fume activator10.1016/j.cemconcomp.2021.104303 ↗
19. Rheological behavior of alkali-activated metakaolin during geopolymerization10.1007/978-1-4614-3445-0_20 ↗
20. Distinctive rheological and temporal viscoelastic behaviour of alkali-activated fly ash/slag pastes : a comparative study with cement paste10.1016/j.cemconres.2021.106441 ↗
21. Interpreting the early-age reaction process of alkali-activated slag by using combined embedded ultrasonic measurement , thermal analysis , XRD , FTIR and SEM10.1016/j.compositesb.2020.107840 ↗
22. Distinct-layer casting of SCC: the mechanical consequences of thixotropy10.1016/j.cemconres.2007.09.023 ↗
23. Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay10.1016/j.compositesb.2018.11.109 ↗
24. Vision of 3D printing with concrete — technical , economic and environmental potentials10.1016/j.cemconres.2018.06.001 ↗
25. Structural built-up of cement-based materials used for 3D-printing extrusion techniques10.1617/s11527-015-0571-0 ↗
26. Stabilization of low-modulus sodium silicate solutions by alkali substitution10.1021/ie202143j ↗
27. 2005 · 3
28. Flow properties of MK-based geopolymer pastes. A comparative study with standard Portland cement pastes10.1039/c3sm51889b ↗
29. Role of water film thickness in rheology of CSF mortar10.1016/j.cemconcomp.2010.01.005 ↗
30. The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash10.1016/j.cemconres.2013.07.007 ↗
31. Steady state flow of cement suspensions: a micromechanical state of the art10.1016/j.cemconres.2009.08.026 ↗
32. Mechanical properties and compositional heterogeneities of fresh geopolymer pastes10.1016/j.cemconres.2013.02.001 ↗
33. Rheology, early-age hydration and microstructure of alkali-activated GGBFS-Fly ash-limestone mixtures10.1016/j.cemconcomp.2021.104244 ↗
34. The origins of thixotropy of fresh cement pastes10.1016/j.cemconres.2011.09.004 ↗
35. The interrelationship between surface chemistry and rheology in alkali activated slag paste10.1016/j.conbuildmat.2014.04.127 ↗
36. Very early-age reaction kinetics and microstructural development in alkali-activated slag10.1016/j.cemconcomp.2014.09.001 ↗
37. A study on the setting characteristics of sodium silicate-activated slag pastes10.1016/S0008-8846(02)01096-7 ↗
38. Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag-fly ash blends10.1016/j.conbuildmat.2015.01.065 ↗
39. A calorimetric study of early hydration of alkali-slag cements10.1016/0008-8846(95)00126-W ↗
40. Effect of the activator dose on the compressive strength and accelerated carbonation resistance of alkali silicate-activated slag/metakaolin blended materials10.1016/j.conbuildmat.2015.08.013 ↗
41. The effect of silica availability on the mechanism of geopolymerisation10.1016/j.cemconres.2011.02.001 ↗
42. Dispersion properties of fly ash–slag powders under the different environment10.1016/j.conbuildmat.2021.123649 ↗
43. On the mechanism of the dissolution of quartz and silica in aqueous solutions
44. Monitoring the setting process of alkali-activated slag-fly ash cements with ultrasonic P-wave velocity10.1016/j.conbuildmat.2020.121592 ↗
45. Pore solution in alkali-activated slag cement pastes. Relation to the composition and structure of calcium silicate hydrate10.1016/S0008-8846(03)00254-0 ↗