Development of microfine cement grouts by pulverizing ordinary cements
Source abstract
Abstract
Abstract Three different cements (CEM I, CEM II/B-M and CEM IV/B according to EN 197-1) containing 0%, 23.5% and 38% of pozzolan, respectively, were pulverized to obtain three additional gradations from each cement, with nominal maximum grain sizes of 40, 20 and 10 μm. Cements with the two finer gradations are classified as “microfine” cements. Suspension properties, groutability and effectiveness of all cements were evaluated for water-to-cement ratios (W/C) of 1, 2 and 3 by weight. A superplasticizer was used to optimize rheological properties. The properties and performance of all suspensions tested are affected primarily by W/C ratio and cement fineness. All microfine cement suspensions have acceptable apparent viscosity, behave as Bingham fluids, are stable for W/C = 1, have reasonable setting times for field applications, have mostly predictable groutability and provide satisfactory strength to grouted sands. The finer gradations of II/B-M cement exhibited the best overall behavior and are considered as the most promising compared to similar gradations of the other two cements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Microbial Applications in Construction Materials · Drilling and Well Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Rheological behavior and setting time of microfine cement-based grouts
2. Littlejohn GS. The development of practice in permeation and compensation grouting: a historical review (1802–2002). In: Johnsen FL, Bruce AD, Byle JM, editors. Proceedings 3rd international conference on grouting and ground treatment. ASCE Geotech SP 120, 2003. p. 50–97.10.1061/40663(2003)3 ↗
3. Tolpannen P, Syrjanen P. Hard rock tunnel grouting practice in Finland, Sweden, and Norway: literature study. Technical Report, Finnish Tunnelling Association, 2003.
4. Henn RW, Soule NC. Ultrafine cement in pressure grouting. Reston (USA): ASCE Press; 2010.10.1061/9780784410271 ↗
5. Soil improvement-state of the art report
6. Schwarz LG, Krizek RJ. Effects of mixing on rheological properties of microfine cement grout. In: Borden RH, Holtz RD, Juran I, editors. Proceedings conference on grouting, soil improvement and geosynthetics, ASCE Geotech SP 30, 1992. p. 512–25.
7. The use of additives in cement grouts
8. Mollamahmutoglu M. Treatment of medium to coarse sands by Microcem H900 as an alternative grouting to Silicate-Ester grouts. In: Johnsen FL, Bruce AD, Byle JM, editors. Proceedings 3rd international conference on grouting and ground treatment. ASCE Geotech SP 120, 2003. p. 1235–42.10.1061/40663(2003)71 ↗
9. Chuaqui M, Bruce DA. Mix design and quality control procedures for high mobility cement based grouts. In: Johnsen FL, Bruce AD, Byle JM, editors. Proceedings 3rd international conference on grouting and ground treatment. ASCE Geotech SP 120, 2003. p. 1153–68.10.1061/40663(2003)64 ↗
10. Eklund D. Penetrability due to filtration tendency of cement based grouts, PhD thesis. Stockholm: Royal Institute of Technology; 2005.
11. Henn R, Davenport R. Ultrafine cement: a critical component of a grouting program. Tunnels and Tunnelling International; 2005. p. 27–9.
12. Grouting performance of microfine cement and silica fume mix into sands10.1520/JAI100462 ↗
13. Littlejohn GS. Design of cement based grouts. In: Baker WH, editor. Proceedings conference on grouting in geotechnical engineering. ASCE; 1982. p. 35–48.
14. Variations in the rheology and penetrability of cement-based grouts-an experimental study10.1016/j.cemconres.2003.11.023 ↗
15. Bruce DA, Littlejohn S, Naudts CA. Grouting materials for ground treatment: a practitioner’s guide. In: Vipulanandan C, editor. Proceedings conference on grouting: compaction, remediation, testing. ASCE Geotech SP 66, 1997. p. 306–34.
16. Lombardi G. Grouting of rock masses. In: Johnsen FL, Bruce AD, Byle JM, editors. Proceedings 3rd international conference on grouting and ground treatment. ASCE Geotech SP 120, 2003. p. 164–97.10.1061/40663(2003)6 ↗
17. Direct determination of the flow curves of non-newtonian fluids. III: Standardized treatment of viscometric data10.1063/1.1721523 ↗
18. Hakansson U, Hassler L, Stille H. Rheological properties of microfine cement grouts with additives. In: Borden RH, Holtz RD, Juran I, editors. Proceedings conference on grouting, soil improvement and geosynthetics. ASCE Geotech SP 30, 1992. p. 551–63.
19. Grout mixes and grouting work
20. Hydrocarbon residuals and containment in microfine cement grouted sand10.1061/(ASCE)0899-1561(2006)18:2(214) ↗
21. Schwarz LG, Chirumalla M. Effect of injection pressure on permeability and strength of microfine cement grouted sand. Grouting for ground improvement: innovative concepts and applications. Geo-Denver. ASCE Geotech SP 168; 2007.10.1061/40912(231)2 ↗
22. Engineering properties of medium-to-fine sands injected with microfine cement grout
23. Warren Spring Laboratory. Viscosity measurement – a user’s guide to viscometers. Viscometers (UK) Ltd., Manufacturing Company; 1990.
24. Tattersall · 1983
25. Alderman NJ, Heywood NI. Improving slurry viscosity and flow curve measurements. Solids Handling; 2004. p. 27–32.
26. Dano C, Derache N. Grout injection in the laboratory. In: Proceedings landmarks in earth reinforcement, international symposium on earth reinforcement. Fukuoka, Japan; 2001. p. 21–6.
27. Yield stress: a time dependent property and how to measure it10.1007/BF01774406 ↗
28. Admixtures in concrete10.1016/B978-0-08-028670-9.50022-3 ↗
29. Influence of superplasticizers on workability of concrete10.1061/(ASCE)0899-1561(1999)11:2(151) ↗
30. Houlsby AC. Cement grouting: water minimising practices. In: Baker WH, editor. Proceedings issues in dam grouting, ASCE; 1985. p. 34–75.
31. Injection of dilute microfine cement suspensions into fine sands
32. Hausmann MR. Engineering principles of ground modification. Singapore: Mc Graw-Hill International Editions, Civil Engineering Series; 1990.
33. Vipulanandan C, Shenoy S. Properties of cement grouts and grouted sands with additives. In: Borden RH, Holtz RD, Juran I, editors. Proceedings conference on grouting, soil improvement and geosynthetics, ASCE Geotech SP 30; 1992. p. 500–11.
34. Perret S, Ballivy G, Khayat K, Mnif T. Injectability of fine sand with cement-based grout. In: Vipulanandan C, editor. Proceedings conference on grouting: compaction, remediation, testing, ASCE Geotech SP 66; 1997. p. 289–305.
35. Clarke WJ. Performance characteristics of microfine cement. Atlanta: ASCE Preprint 84-023; 1984. p. 1–14.
36. Study on long-term strength properties of suspension grouts with ultra-fine-grain materials
37. Guan X, Hu S, Guan B. Research on properties of microfine cement-based material for grouting. In: Proceedings mining science and safety, technology; 2002. p. 582–7.
38. Evaluation of elementary filtration properties of a cement grout injected in a sand10.1139/t06-082 ↗
39. Thixotropic behaviour of cement pastes10.1016/0008-8846(79)90123-6 ↗
40. Selection criteria for Portland and microfine cement-based injection grouts
41. Clarke WJ, Boyd MD, Helal M. Ultrafine cement tests and dam test grouting. In: Borden RH, Holtz RD, Juran I, editors. Proceedings conference on grouting, soil improvement and geosynthetics. ASCE Geotech SP 30; 1992. p. 626–38.
42. Injection of fine sands with very fine cement grout10.1061/(ASCE)0733-9410(1989)115:12(1717) ↗
43. De Paoli B, Bosco B, Granata R, Bruce DA. Fundamental observations on cement based grouts (2): microfine cements and the Cemill process. In: Borden RH, Holtz RD, Juran I, editors. Proceedings conference on grouting, soil improvement and geosynthetics, ASCE Geotech SP 30; 1992. p. 486–99.
44. Estimating the groutability of granular soils: a new approach10.1016/S0886-7798(02)00040-8 ↗