Frost resistance and microstructure of Engineered Cementitious Composites: Influence of fly ash and micro poly-vinyl-alcohol fiber
Source abstract
Abstract
Abstract One of the most damaging environmental conditions to concrete structure is cyclic freezing and thawing. This paper discusses the influence of the high volumes of fly ash (FA) and micro poly-vinyl-alcohol (PVA) fibers on the cyclic freeze–thaw resistance and microstructure of the Engineered Cementitious Composites (ECC). ECC mixtures with two different FA–cement (FA/C) ratios (1.2 and 2.2 by weight), and at constant water-cementitious materials (fly ash and cement) ratio of 0.27 are prepared. To compare the behavior of ECC with ECC matrix, all of the preceding properties are also investigated for ECC matrix mixtures of same composition without PVA fiber. For frost resistance, mixtures are exposed to the freeze and thaw cycles up to 300 cycles in accordance with ASTM C666, Procedure A. Experimental tests consist of measuring the residual mechanical properties (flexural strength, mid-span beam deflection and flexural stress – deflection curve), ultrasonic pulse velocity and mass loss. The roles of PVA fibers and FA are discussed through the analysis of microstructure and fiber–matrix interactions as function of frost exposure. The microstructural characterization by measuring pore size distributions is examined before and after exposure to frost deterioration by using mercury intrusion porosimetry (MIP). The air-void characteristics of mixtures are also studied using linear transverse method. Test results confirm that both ECC mixtures with high volumes of FA remain durable, and show a tensile strain capacity of more than 2% even after 300 freezing and thawing cycles. On the other hand, before completing 300 freezing and thawing cycles, matrix (ECC without fiber) specimens have severely deteriorated, requiring removal from the freeze–thaw machine. Therefore, results indicate that the addition of micro PVA fiber to the ECC matrix substantially improved the frost resistance. The results of freeze–thaw tests also indicated that the reduction of residual physical and mechanical properties with increasing number of freeze–thaw cycles is relatively more for ECC mixture with FA/C ratio of 2.2 than for ECC mixture with FA/C ratio of 1.2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Engineered cementitious composites – tailored composites through micromechanical modeling
2. On engineered cementitious composites (ECC) – a review of the material and its applications10.3151/jact.1.215 ↗
3. Tensile strain-hardening behavior of PVA-ECC
4. ECC Applications. . [07.11].
5. Engineered cementitious composites with high-volume fly ash
6. Use of high volumes of fly ash to improve ECC mechanical properties and material greenness
7. Durability properties of micro-cracked ECC containing high volumes fly ash10.1016/j.cemconres.2009.07.009 ↗
8. Long term durability performance of engineered cementitious composites
9. De-icing salt scaling resistance of mechanically loaded engineered cementitious composites10.1016/j.cemconres.2007.04.001 ↗
10. Assessing the durability of engineered cementitious composites under freezing and thawing cycles10.1520/JAI102406 ↗
11. Rheological control in the production of engineered cementitious composites
12. ASTM C231-97. Standard test method for air content of freshly mixed concrete by the pressure method. Annual Book of ASTM Standards. West Conshohocken (PA): ASTM; 2002.
13. ASTM C666-97. Standard test method for resistance of concrete to rapid freezing and thawing. Annual Book of ASTM Standards. West Conshohocken (PA): ASTM; 2002.
14. ASTM C457-98. Standard test method for microscopical determination of parameters of the air-void system in hardened concrete. Annual Book of ASTM Standards. West Conshohocken (PA): ASTM; 2002.
15. Siebel E. Air-void characteristics and freezing and thawing resistance of superplasticized air-entrained concrete with high workability. ACI Special Publication 1989;119:297–320.
16. Pigeon · 1995
17. Frost resistant concrete
18. Feldman RF. Influence of condensed silica fume and sand/sement ratio on pore structure and frost resistance of portland cement mortars. Fly ash, Silica Fume, Slag and Natural Pozzolans in Concrete, SP-91. American Concrete Institute; 1986. p. 973–89.
19. Influence of silica fume replacement of cement on physical properties and resistance to sulfate attack, freezing and thawing, and alkali–silica reactivity
20. Freeze–thaw durability of concrete: ice formation process in pores10.1016/S0008-8846(98)00103-3 ↗
21. Air entrainment in the presence of superplasticizers
22. Koh Y, Kamada E. The influence of pore structure of concrete made with absorptive aggregates on the frost durability of concrete. In: Proceedings RILEM/IUPAC international symposium on pore structure and properties of materials, Prague, Artia, vol. 11; 1973. p. F45–62.
23. Pore structure of air-entrained hardened cement paste10.1016/0008-8846(81)90067-3 ↗
24. Particulate admixture for enhanced freeze–thaw resistance of concrete10.1016/0008-8846(78)90057-1 ↗
25. Lange H, Modry S. Determination of the frost resistance of limestone aggregates in the light of porosity investigation. In: Proceedings, Rilem Symposium on Durability of Concrete. Prague: Building Research Institute; 1969. p. B129–68.
26. Non-air-entrained high strength concrete—is it frost resistant?
27. Effects of freezing and thawing on the tension properties of high-strength concrete
28. Can microfibers prevent frost damage?10.1016/0008-8846(96)00098-1 ↗
29. Freezing and de-icing salt resistance of blast furnace slag concretes10.1016/S0958-9465(02)00052-5 ↗
30. Simplified inverse method for determining the tensile properties of strain hardening cementitious composites (SHCC)10.3151/jact.6.353 ↗
31. Transport properties of engineered cementitious composites under chloride exposure
32. Influence of microcracking on water absorption and sorptivity of ECC
33. Lepech MD, Li VC. Water permeability of cracked cementitious composites. Paper 4539 of Compendium of Papers CD ROM. Turin: ICF 11; 2005.
34. Yang Y, Lepech MD, Li VC. Self-healing of ECC under cyclic wetting and drying. in: Proceedings of International Workshop on Durability of Reinforced Concrete under Combined Mechanical and Climatic Loads. Qingdao; 2005. p. 231–42.
35. Permeability study of cracked concrete10.1016/S0008-8846(97)00031-8 ↗
36. Water permeability and autogenous healing of cracks in concrete
37. Permeability and self-healing of cracked concrete as a function of temperature and crack width10.1016/S0008-8846(02)01099-2 ↗